Annual Tender for Labour charge of Laying of 11KV XLPE Underground cable of approved work for Various s/dn under Himatnagar Dn.

Sr.No. Description Unit Quantity per Unit Amount in

Laying (including installation, testing and

commissioning) of various size of Single circuit

KV XLPE insulated Alluminumarmoured Cable in

ground 1200 mm deep and 300 mm wide trench,

providing sand cushioning below (75 mm thick

layer of sand) and above (75 mm thick layer of

sand) of the cable and covering it with RCC half

round Hume pipe (150 mm inner diameter with

thickness of 30 mm and One meter in length)

before refilling pre-bonding tap/warning tap

should provide below 700 mm from the ground

level and back filling the same to make ground

level as per original. As per specification and

drawing of UGVCL. (RCC half round pipe should be

provide throughout on cable without gap). Only

Cable will be supplied by UGVCL.

Laying (including installation, testing and

commissioning) of various size of Double circuit

KV XLPE insulated Aluminum armoured Cable in

ground in single trench 1200 mm deep and

mm wide trench, providing sand cushioning below

(75 mm thick layer of sand) and above (75 mm

thick layer of sand) of the cable and covering it

with RCC half round Hume pipe (150 mm inner

2 diameter with thickness of 30 mm and One meter MTR 500 468

in length) before refilling pre-bonding

tap/warning tap should provide below 700 mm

from the ground level and back filling the same to

make ground level as per original. As per

specification and drawing of UGVCL. (RCC half

round pipe should be provide throughout on cable

without gap). Only Cable will be Supplied by

Laying of varous size of 11KV XLPECableinsulated

Aluminum armoured cable above ground in air for

termination of cable in pole as persite condition

and instruction of engineer in charge (Excluding

Signature of Contractor & seal

Website: www.ugvcl.comPage 1 of

Save Energy for Benefit of Self and Nation

cost Of clamp and pipe)

Laying of various sizes of 11 KV XLPE insulated

Aluminiumarmoured Cable in Cable Tray/ Trench

over/below the ground level (excluding

CableTray,only labour charges)

Supply of HDPE pipe having 160 mm Dia

5 (7.3 mm thickness) as per IS ofPE-100,6KG/cm2 MTR 500 640

for 11KV XLPE cable

Providing &Laying of HDPE Pipe confirming to IS

4984:1955 (Amendment no. 2) having 160 mm

Diameter and minimum 5 mm Thickness at a

minimum Depth of 1200 mm below the road

surface by Push through method, drilling the road

6 with HDD machine/manually without breaking the MTR 400 1440

road surface and laying of any size of HT XLPE

insulated Aluminum armored Cable through the

duct as per the instruction of EIC and

specifications Only Cable will be supplied by

Laying of HDPE pipe confirming to IS

4984:1955(Amendment No.2) having diameter of

mm and minimum thickness 5mm at a minimum depth

of 1200 mm below the road surface by push through

method by drilling the road with HDD

machine/Manually without breaking the road surface

and lying of any size of HT/LT XLPE insulated aluminum

armored cable through the duct as per instruction of

EIC and specification (without cost of HDPE pipe, Cable

will be supplied by UGVCL)

Supply and Fixing of Medium grade GI Pipe having

8 110 mm Diameter and minimum thickness 5 mm MTR 20 525

as per IS (weight 9 to 10 kg/mtr)

Supply and Fixing of Medium grade GI Pipe having

9 110 mm Diameter and minimum length 2.5 meter MTR 20 550

(weight 9 to 10 kg/mtr)

HT Push on/heat strink type end outdoor

termination kit preferably 3m(m-seal) orRaychem

make at switchgear

endboxes,transformer(PAD/Pole mounted) or

3core 11KV XLPE cable as per spec. ofUGVCL

(120/150/185 mm2 HT XLPE CABLE)

Signature of Contractor & seal

Website: www.ugvcl.comPage 2 of

Save Energy for Benefit of Self and Nation

Providing and Fixing of HT Push on/heatstrink

type Straight Joint preferably3m(m-seal) or

11 Raychem make for 3 core11KV XLPE cable as per NOS. 20 7655

specification ofUGVCL. (120/150/185 mm2 HT

Providing and Fixing of “Route marker” of CC

1:2:4, 150 mm X 750 mm Concrete stone

embedded in earth at least 300 mm below the GL

and 450 mm above GL at distance of

approximately 100 Meter or as directed by

engineer in charge. The route marker must be

painted with yellow colour of stone with red

colour for embracing on stone –“UGVCL 11 KV

Cable” including material, painting &labour

charges for excavation& refilling.

13 RMU Shifting with Plinth erection withmaterial

&labour as per site Specification.

FSP Shifting with Plinth erection with material &

labour as per site Specification

Supply & Providing of GI strip type Earthing having

25X3 mm size with CI plate to neutral of

x’mercentre/RMU/FSP including cost of 10kg coal,

10kg salt &25kg(1Bag) Bentonite powder etc. The

pit for Earthing should be 1800mm deep and

mm2section.The pit is to be filled up by 300 mm

alternate layers of salt and coke/charcoal up to

1500 mm from the bottom the top the pit is filled

up with lose earth. GI strip must be covered with

Labour Work For 11Kv Xlpe 185mm2

Underground Cable Fault Detection And Digging

16 Of Pit At The Fault Location And Refilling Of Earth NOS. 6 15350

After Cleaning Fault With Latest Technology And

Specification By Engineer’s.

17 Plinth for T/C As per Specification. MTR 5 32500

WELFARE CESS 1%

TOTAL AMOUNT OF TENDER = Rs.

TOTAL AMOUNT OF TENDER = Rs.

Executive Engineer

HimatnagarDivision

Signature of Contractor & seal

Website: www.ugvcl.comPage 3 of