Rate Contract for SITC of Electrical-Mechanical work at different Sumps of East Zone in STP Dept. of AMC.

(Technical Bid) must reach the office

3 Date of Volume-I ( Technical Bid ) opening 10/04/2026, 16.00 Hrs.

Volume II :- Financial Bid

Sewage Treatment Plant Division Municipal Commissioner

5 th Floor, C block, Ahmedabad Municipal Corporation

Sardar Patel Bhavan, Sardar Patel Bhavan,

Ahmedabad – 380001. Ahmedabad –

Gujarat (India). Gujarat (India).

Work SITC of Electrical-Mechanical work at different Sumps of East Zone in STP Dept. of AMC

ITEM DESCRIPTION UNIT AMOUNT

NO. RATE IN Rs.

1.1.1 SEWAGE SUBMERSIBLE PUMP SET DUCK 1 Nos. 63,974.00

Supply, installation, testing and commissioning of non

clog vertically mounted submersible pump Duck Foot

Bend Assembly Size: 150 mm

2.1.1 VALVES 1 Nos. 7,791.00

Supply, installation, testing and commissioning of

Manually gear operated CI Double Flanged, Non Rising

Spindle type, Sluice Valve Conforming to IS 14846 PN

1.0 with SS 304 seat rings and SS spindle with all hot

dipped galvanized hardware's, bolts, nuts & washers,

gaskets, etc. as per data sheet. Size : 150 mm NB

(Manually Operated)

2.1.2 Item description as per Above 1 Nos. 12,805.00

Size : 200 mm NB (Manually Operated )

2.1.3 Item description as per Above 1 Nos. 26,212.00

Size : 300 mm NB (Manually Operated )

3.1.1 Supply, installation, testing & commissioning of Non 1 Nos. 8,612.00

slam, flanged, single door, swing type Dual Plate check

Valve conforming to IS 5312, Part 1 having pressure

rating PN 1.0 to be installed on delivery side of each

pump having C.I. body and door, CF8M seat rings along

with all necessary hardwares as per data sheet. Size:

3.1.2 Item description as per Above Size: 200 mm NB 1 Nos. 16,671.00

4.1.1 SITC of corrugate design SS-304 Expansion Bellows 1 Nos. 4,656.00

with flanges, 15mm axial movement, 300mm overall

length of PN-1.0 rating with tie road, nuts, all necessary

SS hardwares etc. of following sizes, as per IS &

Specification. Size : 150mm x 300 mm ( L )

4.1.2 SITC of corrugate design SS-304 Expansion Bellows 1 Nos. 6,216.00

with flanges, 15mm axial movement, 300mm overall

length of PN-1.0 rating with tie road, nuts, all necessary

SS hardwares etc. of following sizes, as per IS &

Specification. Size : 200mm x 300 mm ( L )

5.1.1 MS PIPES & SPECIALS 1 RMT 1,629.00

Supply, Gas cutting of pipe, Fabrication of reducer &

expander, welding, Installation, testing and

commissioning of MS pipe, specials, reducer, expander,

bend for Y-Joint with header, etc. fabricated from MS.

plate with necessary supports & anchoring. Pipe

fabricated from MS plate. (Excluding supply of flange)

Size : 150 mm NB X Mini.4.5 mm Thk

5.1.2 Size : 200 mm NB X Mini.4.5 mm Thk 1 RMT 2,114.00

5.1.3 Size: 300 mm NB X Mini.5.6 mm Thk 1 RMT 3,799.00

6.1.1 Supply, Gas cutting of pipe, Fabrication of reducer & 1 KG 96.00

expander, welding, Installation, testing and

commissioning of MS pipe, Specials, reducer, expander

etc. conforming to IS 3589 flanges confirming to IS

6392-PN-1.0, fabricated from MS. plate with necessary

supports & anchoring. Pipe fabricated from MS plate.

7.1.1 Supply, welding , Installation, testing & commissioning 1 Nos 1,180.00

of MS flat machined faced flanges confirming to IS

6392 & drilled to IS - 1538 with drilling off center bolt

holes and flange thickness as per PN 1.0 including

cutting & welding. Size : 150 mm NB (Drilled)

7.1.2 item description as above Size : 200 mm NB (Drilled) 1 Nos 1,640.00

7.1.3 item description as above Size : 300 mm NB (Drilled) 1 Nos 2,520.00

7.1.4 item description as above Size : 300 mm NB (Blind) 1 Nos 3,090.00

8.1.1 Providing, Supply of Structure Steel at site of work with 1 Kg. 64.83

freight, loading, unloading carting, etc. including all

taxes and duties complete such as joints, channels,

angles, Iron Rails, SA/ISMC/ISMB/MS flat, Plates,

Chequered plates (below 10mm thickness) for cable

trench etc. required for support structure of all Electro-

mechanical equipment, piping, etc. for support on floor /

wall / beam / brackets etc. as per tender and IS.

8.1.2 Labour Charges for lowering, laying, Fixing with 1 Kg. 11.36

fabrication various size section of MS such as joints,

channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat,

Plates, Chequered plates, for cable trench etc Complete

with two coats of red oxide and two coats of approved

colour shade of epoxy paint

9.1.1 Floating water Controller Switch (Market Rate) 1 No. 1,017.00

Total Amount (Sum of Rate of Each Items/Unit )

Total Amount (Sum of Rate of Each Items/Unit )

Signature of Tenderer : Additional Chief Engineer (S.O.E.& M.)

Name : Ahmedabad Municipal Corporation

Company’s seal :