CHHANDA GOV PUMPING WATER SUPPLY SCHEME

Amount

CIVIL WORKS

Excavation of earth for pipe line Assuming that 90% pipe line is laid in trenches, it is estimated that 75% excavation will be done in ordinary soil and rest 25% will be done in soil mixed with shingle, bajri & boulders

Same as above Item 1 but in Medium Rock

Providing & fixing of French well as per departmental type & design complete including supply of all material labour T&P required for proper completion of work.

Servey, Design, drawing and construction of 16 mtr long & 2 mtr high RCC cross wall in RCC 1:1.5:3 with necessary reinforcement complete in all respect as per direction of engineer incharge including supply of all material labour T&P required for proper completion of work.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.Excavation in all kinds of soil for foundation and other side develpoment work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone

Reinforcement for R.C.C. Work Using Thermo-Mechanically Treated Bars

Centering, shuttering including struttings, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts, struts and slab.

Design, testing bearing capacity of soil and construction of R.C.C. (1:1½:3) semi sunk sump/Clear Water Reservoir of following capacities in K.L. including supply of necessary scaffolding, shuttering and other accessories along with construction of all valve chambers, supply and fixing of inlet and outlet pipes of size equal to sizes of inlet and outlet pipe line, making bye pass arrangement, fixing of overflow pipe in outlet pipe/distribution system, fixing of lightening conductor & M.S. Manhole of size 1 m x 1 m as per norms, water level indicator, supply and fixing of M.S. Steel Ladder outside and inside the tank, fixing of railing around top dome, construction of 90 cm width PCC apron with drain around the CWR and colour washing of approved class snowcem including supply of all materials, labour, T&P etc. complete as per latest IS specification or as per satisfaction & approval of Engineer in Charge.

Supply & Fixing of chlorinating arrangement of 25 litre capacity over CWR roof slab. Including supply of all materials & labours as per type design & drawing complete.

Design, drawing, testing bearing capacity of soil & construction of Pump House of size 7.0x6.0x4.0 m made up of Brick masonry with R.C.C. flat roof pumping station i.e. MPS & IPS and other appurtenant works with construction of cantilever beems for supporting of ISMB girder and chainpully including construction of pumps foundation as per drawing issued by the department at the time of execution including supply of all materials, labour, T&P etc. complete with cartage of materials as per satisfaction & approval of Engineer in Charge.

Design, drawing, testing bearing capacity of soil & construction of Staff Quarters/Store Room , size (3.0 x 3.0 x 3.0) m (Single Room) made up of Brick masonry with R.C.C. flat roof at MPS & IPS and other appurtenant works including supply of all materials, labour, T&P etc. complete with cartage of materials as per satisfaction & approval of Engineer in Charge.

Survey, design, supply, cartage & laying, jointing, Welding, testing & commissioning of following dia and thickness M.S. E.R.W. Pipe (YST-210) by welding (by 20 KVA Generator) conforming of to IS: 1387- 1967, IS 1978 – 1982 & IS 816: 1969 including painting of pipe from outside with anti corrosive paint in two coats, making necessary connections for pumps and sump cum CWR at MPS and other appurtenant works such as fixing of air valve, sluice valve, reflux valve at suitable points including making scouring arrangement at suitable locations by fixing Tee and gate valve etc. complete. including supply of all materials, labour, T&P and testing of supplied materials etc. complete as per latest IS specification or as per direction, satisfaction & approval of Engineer in Charge after painting two coat of anti corrosive paint over one coat primer and testing of pipe line complition of work.

MSERW pipe 80 mmX4.0 mm thick

Survey, design, supply, carting, laying and jointing of supply main and distribution main of GI (M) Pipe for following sizes from MBR to service reservoirs at different locations including provision of specials and also testing and commissioning of laid pipe line including supply of all materials, labours, T&P etc and testing of supplied materials complete as per IS 1239 part 1: 2004/latest IS Specification and as per direction, satisfaction of Engineer-In-Charge.

15 mm dia

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

125 mm dia

Caratge of following sizes of sluice valves, loewring them into trenches and fixing the same on water supply line including cost of valves, specials lobour T&P complete in all respect but excluding the cost of excavation and chember.

80 mm dia

125 mm dia

Caratge of following sizes of reflux valves, loewring them into trenches and fixing the same on water supply line including cost of valves, specials lobour T&P complete in all respect but excluding the cost of excavation and chember.

80 mm dia

Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rebber insertions etc. complete.

50 mm dia

Caratge of following sizes of Gate Valve, loewring them into trenches and fixing the same on water supply line including cost of valves, specials lobour T&P complete in all respect but excluding the cost of excavation .

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Design, Drawing and Construction of masonry chamber sluice valve with a floating cost of neat cement complete as per standard design with F.P.S bricks (1.00mx1.00mx0.90m)

Design, Drawing and Construction of Gate Valve Chamber including supply of materils, labours, T&P etc. required for proper completion of work. (0.45mx0.45m)

Design, Drawing and Construction of Air Valve Chamber including supply of materils, labours, T&P etc. required for proper completion of work. (0.60mx0.60m)

Servey, Design and Construction of thrust block/anchor block at bends in pipeline inclduing supply of all materials, labour, T&P etc complete required for proper completion of work as per direction of satisfection and approval of engineer-in-charge. P:C:C 1:2:4 (1Cement:1Coarse sand:4graded stone grit)

Centring and shuttering including strutting, ropping etc. and removal of form for thrust block.

Random Rubble stone masonry laid in 1:6 cement and course sand mortar including supply of all materilas, labour, T&P etc complete.

Random Rubble stone masonry laid dry including supply of all materilas, labour, T&P etc complete.

Finishing with Food grade Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’ specifications i/c appropriate priming coat, preparation of surface, etc. complete. On steel work

Caratge of following sizes of Bulk water meter, loewring them into trenches and fixing the same on water supply line including cost ofBulk water meter, specials lobour T&P complete in all respect but excluding the cost of excavation .

50 mm dia

65 mm dia

80 mm dia

Design, Drawing and Construction of Bulk water meter Chamber including supply of materils, labours, T&P etc. required for proper completion of work. (1.0x1.0x0.9) m

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. Bituminous road

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6 or richer mix (P.C.C.Road cutting )

Design, Drawing and Construction of BPT including supply of materils, labours, T&P etc. required for proper completion of work. (0.60mx0.60m)

Boundry Wall and Gate

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone

Reinforcement for R.C.C. Work Using Thermo-Mechanically Treated Bars

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Snowcem two coat over one primary coat white wash inside & out side the pump house including supply of all labour T&P etc complete for the proper completion of work

Providing and fixing isi Marked flush door shulters conforming to IS 2202 (Part I) non Decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial three ply veneering with vertical grains or cross bands and face veneers on both faces fo shutters 35 mm thik including ISI Marked Stainless Steel Butthinges With necessery Screws .

Making ferrule connection in the existing main of G.I or and type of pressure mains with saddle piece, service connections, fittings and fixing of ferrule including the main , including the cost of all materials like GI Specials, brass bib cock and ferrule etc.