PROVN OF CHAIN LINK FENCING AND GI SHEET COVER TO PANEL AND ALTN TO ROOF SLAB OF BLDG NO P-66 AT CGDHQ 15 UNDER GE (I) CG PORBANDAR

Excavating in post holes or similar holes not exceeding 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm deep in any type of soil including removing the excavated material, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Plain cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as bed plates to vertical steel posts, etc., including necessary form work, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MS angle iron fixed independently without connecting plates complete as in fencing post or strut including cutting to shape as directed drilling holes welding notching wire etc., complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wire any mess size and type to any type of standard rails straining bolts etc., including provision of binding wire, complete all as specified and directed by Engineer-in-Charge.

Supply only chain link MS galvanised fencing in available size, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Mild steel screws bolts machine made with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut not exceeding 5cm long and diameter of neck 16 to 20mm, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Mild steel round bars 10mm dia round bars cut to length, bent to shape required, including cranking, bending spirally as in straining bars, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation surfaces of any description over 10cm width or girth not otherwise described two coats synthetic enamel paint over a coat red oxide, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Framed brackets of angles or tees with web and flanges cut to shape drilled and countersunk for screw including bending and welding angles as necessary gusset plates riveting etc., not exceeding 10 kg each bracket confirming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe- 290 Gde -E-165 portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., complete all as specified and directed by Engineer-in-Charge.

Material and labour of new steel surfaces of any description not exceeding 10 cm in width or girth when un connected with other not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-Charge.

Material and labour for surface preparation of any description wood, steel, iron, concrete, brick, stone etc., exceeding 10 cm in width or grith and applying two coat of black bituminous paint, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws, complete all as specified and directed by Engineer-in-Charge.

Surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15cm deep and getting out including removal of excavated soil to a distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 100mm thick cement concrete type D-2, 1:4:8(40mm graded aggregate) as in sub-base flooring etc., complete all as specified and directed by Engineer-in-Charge.

Material & Labour for sand filling under floor or in foundation including watering and consolidation, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment, complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing tiles and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and paving’s not exceeding 15cm thickness (below or above ground level) and removing from the site, complete all as specified and directed by Engineer-in-Charge.

Taking down existing roof treatment with carefully and disposed to outside of defence area, complete all as specified and directed by Engineer-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc., complete all as specified and directed by Engineer-in-Charge.

Material & Labour for providing 75mm thick cement concrete type C-2,1:3:6 (40 mm graded aggregate) as in sub base, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in levelling course, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 15mm thick external surfaces on brick/concrete in Cement Mortar 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement, complete all as specified and directed by Engineer-in-Charge. Note:-WPC measured and paid separately

Supply only integral water proofing compound, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg/m2 including cleaning surface, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for APP Based Polymeric membrane minimum weighing 3 kg /sqm and minimum 3mm thick Reinforced with polyester non wove fabric (wt not less than 150 gms/ sqm) laid on primed surface by forced application, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for double charged vitrified ceramic tiles with light shade 10mm thick Square or Rectangular polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bedding in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms (Ruby Red/Jet Black shade) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 3mm thick wall care putty on wall surfaces in any layers and make even and smooth, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 3mm thick wall care putty on ceiling surfaces in any layers and make even and smooth, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of new or old surfaces and applying two coats of oil bound distemper on wall or ceiling surfaces over a coat of primer, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of newly plastered/scraped surfaces and applying two or more coats of 100% Premium Acrylic emulsion paint having VOC 50gm/litre and UV resistance as per IS 15489 : 2004, Alkali and Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with Silicon Additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 12mm thick toughened one way sheet glass exceeding 0.50 sqm in each pane in required sizes, secured in aluminium frame with rubber gasket, joined / sealed with silicon, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 15mm thick quartz stone slab fixed over 10mm thick cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Stainless steel fancy type glass door handle 250mm long, complete all as specified and directed by Engineer-in-Charge. (Make : Enox or equivalent)

Supply & Fixing in repair Stainless steel turn knob lock for 8 to 12mm thick sheet glass, complete all as specified and directed by Engineer-in-Charge. (Make : Enox or equivalent)

Supply & Fixing Heavy duty suitable for more than 120.00 Kg double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including cutting of floor and making good in Cement Mortar 1: 3, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for granules textured homogeneous wall finishing system including preparation of old surfaces consisting of a two component system of dry granules (25 Kg per Pack) made of 92% silica particles coated with fade resistant pigment, 100% acrylic polymer bonding agent (5 Kg per pack) with the applied thickness of the coating being between 0.8mm - 1.2mm to be applied on curved, smooth level plaster without key, as per manufacture directions, for usages to be applied and approved applicator of the manufacture as per the direction/ supervision of the Engineer -in-Charge, all complete, The above texture coating should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating to meet JISA 6909 on smooth plastered surfaces, complete all as specified and directed by Engineer-in-Charge. Make : Bakelite Hylam Limited or equivalent make approved by the GE

Please Enable Macros to View BoQ information