TENDER FOR FABRICATION ITEMS OF FOR ANK RURAL DIVISION STORE FOR VARIOUS SUB DIVISIONS UNDER ANKLESHWAR RURAL DIVISION

TENDER NO E-7(26-27)

SR NO ITEM CODE DESCRIPTION UNIT RATE QTY AMOUNT

Fabrication of Anchor Rod from 16 SQ.mm MS Raoundbar & 65 mm x

1 mm x 6 mm / 50 mm x 50 mm x 6 mm M.S. angle as per approved drawing No.

and requirement of the company.

Fabrication of Eye Bolt from 16 SQ.mm MS Raoundbar with supplying of

2 9910000015 (two) nuts of suitable size as per approved drawing and requirement of the No.

Fabrication of Turn Buckle from 16 SQ.mm MS Raoundbar & 65 mm x

3 mm x 6 mm / 50 mm x 50 mm x 6 mm M.S. angle as per approved drawing No.

and requirement of the company.

Fabrication of 11' (feet) long Top/Bottom/D.O. angle from 65 mm x 65 mm

4 9910000030 x 6 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 9' (feet) long Top/Bottom/D.O. angle from 65 mm x 65 mm x

5 9910000031 6 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 4'6" (feet) long Tapping / bracing angle from 65 mm x

6 9910000003 mm x 6 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 2'3" (feet) long bracing/ support angle from 65 mm x

7 9910000039 mm x 6 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 11KV HT 'V' Cross Arm from 65 mm x 65 mm x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of 11KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S.

9 9910000022 angle and 50mm x 6 mm M.S. flat as per approved drawing and No.

requirement of the company.

Fabrication of 22KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S.

10 9910000055 angle and 50mm x 6 mm M.S. flat as per approved drawing and No.

requirement of the company.

Fabrication of 22KV HT 'V' Cross Arm from 65 mm x 65 mm x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for PSC pole from 50mm x 6 mm

M.S. flat as per approved drawing and requirement of the company.

Fabrication of 'U' Clamp from 50mm x 6 mm M.S. flat as per approved

drawing and requirement of the company.

Fabrication of 'C' clamp suitable for PSC pole from 50mm x 6 mm M.S. flat

as per approved drawing and requirement of the company.

Fabrication of 'C' clamp suitable for RSJ GIRDER pole from 50mm x

mm M.S. flat as per approved drawing and requirement of the company.

Fabrication of Three hole patti from 50mm x 6 mm M.S. flat as per

approved drawing and requirement of the company.

Fabrication of 11' (feet) long Top/Bottom channel from 100 mm x 50 mm x

17 9910000061 5 mm M.S. channel as per approved drawing and requirement of the No.

Fabrication of 9' (feet) long Top/Bottom channel from 100 mm x 50 mm x

18 9910000060 mm M.S. channel as per approved drawing and requirement of the No.

Fabrication of 11'(feet) long angle bracing from 50 mm x 50 mm x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of 9'(feet) long angle bracing from 50 mm x 50 mm x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of 11' (feet) long channel welded from assorted length of scrap

channel as per approved and requirement of the company

Fabrication of 9' (feet) long channel welded from assorted length of scrap

channel as per approved and requirement of the company

Fabrication of Guy Clamp pair suitable for 10 mtr PSC pole from 50mm x

6 mm M.S. flat as per approved drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for 9/11mtr RSJ GIRDER pole from

24 9910000073 50mm x 6 mm M.S. flat as per approved drawing and requirement of the PAIR

Fabrication of 5' (feet) long Tapping angle from 65 mm x 65 mm x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of H.T. Ext'n suitable for 22KV system from 65 x 65 x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of H.T. Ext'n suitable for 11KV system from 65 x 65 x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of 750 mm long Channel for HT AB conductor from 100mm x

28 9910000069 50mm x 5mm M.S. Channel as per approved drawing and requirement of No.

Fabrication of 22KV HT "V" Cross Arm from 100mm x 50mm x 5mm M.S.

Channel as per approved drawing and requirement of the company.

ESTIMATE AMOUNT