Replacement of existing 2x10MVA. 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq. Ballari Dist. on Partial Turnkey Basis Call-4.

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED AND BANK GUARANTEE TOWARDS EMD OVER AND ABOVE RS.10.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CHIEF GENERAL MANAGER, KPTCL, BENGALURU SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS, FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE TOWARDS BALANCE EMD/BID SECURITY issued either by a Nationalized/Scheduled Bank. (For the balance EMD above Rs. 10Lakhs (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the e-procurement portal to enable the owner for verification of EMD BG at the time of opening of Techno Commercial Bid, failing which the offer will be rejected. 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19) 6) POWER OF ATTORNEY (SCHEDULE- 20). 7) ANY OTHER AGREEMENTS /UNDERTAKINGS/SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief Engineer Electy.,

Transmission (Operations) Zone

KPTCL, Kalaburagi-585105

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

a) * We have submitted bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium) VOID

Name of the Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with subject Bid Documents (including Clause No.40 of "Conditions of Contract (CC)" & Clause No.12 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Freight and Insurance, Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Duties, such as Custom Duties on imports, Levies, Surcharge/Cess etc., if any applicable on the transaction excluding GST are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Duties and Levies additionally payable shall be to our account. We further confirm that, no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us. We confirm that, the Prices quoted by us are excluding GST.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in our Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Itemwise Financial Bid in e-Procurement Portal for this proposal..

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of Single Contract for the entire Scope of the Package in accordance with Clause No.26.2 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : Bids are accompanied by Bid Security (EMD) for Rs.2.00Lakhs.We have enclosed a Bid Security through e-Payment mode for a sum of Rs.10.00Lakhs and remaining amount of Rs.5.78Lakhs ( above Rs.10 Lakhs) in the form of Bank Guarantee in original and two copies of the original valid for a period of 225 days from the Last date of bid submission as notified (either original or extended), and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in CLAUSE NO. 13 of ITT & Clause No. 5 of NIT)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b. EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c. Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d. Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f. Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g. Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h. Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC & all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Section-5 :Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations & Transmission lines shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data, as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five percent (5%) of the Amount Put to Tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT) of the tender valid up to the end of ninety (90) days after the end of the Contract Guarantee Period mandatorily in the form of electronic Bank Guarantee (e-BG) from the Banks which are integrated with NeSL in the form attached as Annexure-III (Section 4: Formats of Annexures) in your favour in accordance with Clause 25.5 of ITT and Clause 43 of the CC (Conditions of Contract), as per the format given in Section 4 and enter into a formal agreement with you within Twenty (20) days from the date of issue of Letter of Intent to Award the Contract.

16 BID PRICE : We declare that our lumpsum Price for the entire scope of work specified in the specifications and documents, shall be as indicated in Schedule - 1.

17 CHECK LIST : We have included a Checklist duly filled in Schedule 22

18 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

19 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written letter of acceptance thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

We declare that in terms of Clause No. 11 of ITT, Bid documents, the following are our lumpsum price in Rupees for the entire scope of work as specified in the Specifications and Documents.( Inclusive of all Taxes (Excluding GST) & Duties).

Total Lumpsum Price : ( In Figures) Note: Fill as "YES" against this column in case Prices are indicated in the Item-Wise Bid Financial Offer in figures

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 (1 of 2)-SUMMARY OF PRICE COMPONENTS

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Summary of Price Components

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Summary price components for identified in accompanying specifications

( Name of the Work) as per the scope identified in accompanying specifications.

Sl no Description Amount in Rs. (Fill as "YES" against the above Price columns in case Prices are indicated in the Price templates)

A Material / Equipment Price (including Packing & Forwarding charges) in the Scope of the Contractor

i) Ex-works including all taxes & duties [As per schedules -

ii) Freight and Insurance Charges (Not Applicable) [As per schedules - 3A(i) for Station & 3B(i) for Line]

iii) Total FOR site price (i+ii)

B Mandatory spares price (including packing & forwarding charges)

i) Ex-works including all taxes & duties

ii) Freight and Insurance Charges(Not Applicable) (As per schedule -4)

iii)Total FOR site price (i + ii)

C Supply portion total FORD price [A+B]

D Erection portion:

i) Total charges for Erection, Testing & Commissioning of all Supply items [as per schedules-

ii) Total charges for entire civil works [ as per Schedules-

iii) Total civil works, erection, Testing and commisioning charges (i)+(ii)

E Total Bid Price = C+D(iii) In figures : Rs.

Total Bid Price in Figures : Rs.

Total Bid Price in words : Rupees

Note: The erection charges shall include the charges for taking delivery at Owner's store, unloading, handling, storage, erection, testing and commissioning of all equipments .

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 ( 2 of 2 ) - TAXES(Excluding GST), DUTIES & OTHER LEVIES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Fill IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Estimates of Indian Taxes (Excluding GST), Duties and Levies included in the Total Bid Price are as follows:

SL. No. Description of Applicable Tax (Excluding GST) / Duty / Levy

Rate of Tax (Excluding GST)/ Duty / Levy Amount of Taxes (Excluding GST) / Duties in Rupees Rate of Tax (Excluding GST) / Duty / Levy Amount of Taxes (Excluding GST)/ Duties in Rupees

1 SGST/UTGST Applicable taxes (Excluding GST), duties & levies prevailing as on the last date of bid submission shall be quoted

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

6 Building and other construction workers welfare Cess for Supply, Erection and Civil Portion works

8 a. Applicable Customs Duty (*) (Bidders shall also clearly indicate the breakup of Customs duty such as BCD, Cess,etc.,)

b. If there is any existing Treaty between India and the country from where the goods required for this project are proposed to be imported, then copy of the treaty shall be uploaded.

9 Other Taxes & duties if any (Specify) **

10 Other Taxes & duties if any (Specify) **

11 Total (Sum of 1 to 10)

(*) In case of CIF portion of Supply.

** Please Specify the nature of the other Taxes (Excluding GST) along with the details in the "Rate" Column.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2A : SCHEDULE OF DISCOUNT

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

We hereby offer an unconditional discount on our quoted price in Schedule 2 (1 of2) as under. Any discounts offered anywere else in Bid shall not be considered.

Sl.No Nature of Discount

Percentage of discount Amount (in Rs.) (Fill in as 'YES' in case Prices are indicated in the Item-Wise Bid Financial Offer) Remarks

I Supply Schedules a) Ex-works prices

b) Freight & Insurance (Not Applicable)

II Erection Schedules

III Civil Works Schedules

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE- 2 B - STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no. 3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form Uploaded.

2 No deviation certificate Uploaded.

3. a). EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Rs:2,00,000/- The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b). EMD amount above Rs.10Lakh by Bank Guarantee

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i) - Price Breakup for - Supply portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Supply portion :

Sl No. Name of the Equipment/Materials Unit

Quantity Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

A1 Power Transformer

1 Power Transformers: a) 20 MVA, 110/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake/Moose ACSR on primary side of transformer and 2 nos of copper flat for each phase from LV side of Transformer and 2 Nos of copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators as per specifications.(45 MT) No. 2 KPTCL Supply

2 Nitrogen Injection fire extinguishing system-supplying, erection & incluidng civil Engineering works, soak pit etc., as per the recommendaion of the supplier of the fire lighting system for Power Transformer below100 MVA No 2

A2 Current Transformer

1 11kV class outdoor Current Transformer of ratio 1200-800/1-1-1 A with 0.2 accuracy class for 11kV Bank Incomer Nos. 6

2 11kV class, 25kA Neutral Current Transformer of ratio 1200-800/1-1-1 A for REFR protection with terminal connector suitable for 2 Nos. of Copper flats as per specifications. Nos. 2

A3 ISOLATORS : 11kV Isolators

1 11kV isolator, double break 400A, 25kA capacity with rigid bi-metallic terminal connector suitable for Coyote ACSR for capacitor Bank Set 2

2 11kV isolator, single break 400A, with Roaster GOS, with rigid bimetallic terminal connector suitable for coyote ACSR. Set 4

3 11kV isolator, double break 1200A, 25kA capacity with rigid bi-metallic terminal connector suitable for Drake ACSR Set 2

A4 SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR

1 9 kV, 10kA with connector and clamp No. 12

A5 Capacitor Bank: 2.9MVAR

Design, Engineering, supply, erection, testing & commissioning of 2.9MVAr, 12.1kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and station class LAs, 0.2% series reactor on neutral side with mounting structures for NCT, Capacitor Bank, station class LAs, Series reactor etc,. complete as per specification Set 2

A6 Station structures : 11kV side (LV side of transformer)

1 Supplying & erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11kV 400 A Roaster Isolators and 9kV, 10kA surge arrestor (3 No.) complete set . Set 6

11kV GOS/Cable Terminating structure

1 11KV Cable Terminating Structure for LV Side of Transformer(0.072 t Per Structure) No/MT 1/0.072

2 11KV GOS/Cable Terminating Structure for 11KV Capacitor Bank(0.158 t per structure) No/MT 2/0.316

A7 1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications

1 19C x 2.5 Sq.mm Mtrs 900

2 4C x 6 Sq.mm Mtrs 400

3 2C x 2.5 Sq.mm Mtrs 300

4 4C x 4 Sq.mm Mtrs 400

A8 11kV switchgear:

1 11kV,25kA, Metal clad VCB switchgear (1600A for incomer & 1250A for feeders) outdoor type, each comprising of 1I/c+4F+2CB+1AP (remote annunciation cum control panel )with CTs & PTs etc., completer as per technical specification. Note: 1. The switchgear for capacitor bank shall have necessary over voltage / under voltage / circulating current relays & other protection relays as per specification ) 2. The remote announciation cum control panel is simplex type. 3. The electronic trivector meters with ABT & TOD features, DLMS protocol energy meter has to be provided Set 1 KPTCL Supply

A9 HV Cables:11kV UG cable with the required cable terminations at both ends

1 11 kV class 1 X 1000 Sq mm U G Cable XLPE (from 110/11kV transformers to 11kV switchgear) Mtr 400

2 11 kV class 3 X 240 Sq mm U G Cable XLPE (from 11kV switchgear to 11kV take off DP structure) Mtr 500

3 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type ) No. 4

4 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type) No. 4

5 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type ) No. 6

6 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type) No. 6

A10 Equipments for establishing SCADA Communication :

1 Multi Functional Transducer (MFT) 0.2S class including labour (market rate) No. 7

2 Opto Coupler ( 110V DC) including labour (market rate) No. 7

Cables -Supplying and Laying L/s

3 Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core Mtr 70

4 Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core Mtr 35

5 Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core Mtr 70

6 Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core Mtr 35

Note: The actual materials/quantity required may be assertained in consultation with SEE SCADA

A11 Earth Mat formation :

1 Equipments name plates & earthing name plates including fixing at outdoor yard. No. 16

A12 STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder)

1 Supplying and erection of yard lighting structure alond with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N) 8.5mtr height Nos 3

2 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes forcable/ conduit entry as required with one coat of primer of approved make etc. (200mm x 200mm x 65mm) Nos 3

3 PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification. 2C x 6 sqmm Mtrs 210

4 Supplying and fixing of 6-32 A Single pole MCB Nos 3

5 Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material LED streetlight 200W Nos 3

A13 MISCELLANOUS ITEMS

1 Rubber mats 1000 mm x 1000 mm x 10 mm size No. 6

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(ii) - Price Breakup for - ERECTION PORTION INCLUDING TESTING & COMMISSIONING and DISMANTLING PORTION.

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

ERECTION PORTION , Testing & Commissioning and De-commissioning portion :

ERECTION PORTION :

Sl No. Name of the Equipment/Materials Unit

Quantity Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

A1 Power Transformer

1 Power Transformers: a) 20 MVA, 110/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake/Moose ACSR on primary side of transformer and 2 nos of copper flat for each phase from LV side of Transformer and 2 Nos of copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators as per specifications.(45 MT) No. 2

A2 Current Transformer

1 11kV class outdoor Current Transformer of ratio 1200-800/1-1-1 A with 0.2 accuracy class for 11kV Bank Incomer Nos. 6

2 11kV class, 25kA Neutral Current Transformer of ratio 1200-800/1-1-1 A for REFR protection with terminal connector suitable for 2 Nos. of Copper flats as per specifications. Nos. 2

A3 ISOLATORS : 11kV Isolators

1 11kV isolator, double break 400A, 25kA capacity with rigid bi-metallic terminal connector suitable for Coyote ACSR for capacitor Bank Set 2

2 11kV isolator, single break 400A, with Roaster GOS, with rigid bimetallic terminal connector suitable for coyote ACSR. Set 4

3 11kV isolator, double break 1200A, 25kA capacity with rigid bi-metallic terminal connector suitable for Drake ACSR Set 2

A4 SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR

1 9 kV, 10kA with connector and clamp No. 12

A5 Station structures : 11kV side (LV side of transformer)

1 Supplying & erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11kV 400 A Roaster Isolators and 9kV, 10kA surge arrestor (3 No.) complete set . Set 6

11kV GOS/Cable Terminating structure

1 11KV Cable Terminating Structure for LV Side of Transformer(0.072 t Per Structure) No/MT 1/0.072

2 11KV GOS/Cable Terminating Structure for 11KV Capacitor Bank(0.158 t per structure) No/MT 2/0.316

A6 1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications

1 19C x 2.5 Sq.mm Mtrs 900

2 4C x 6 Sq.mm Mtrs 400

3 2C x 2.5 Sq.mm Mtrs 300

4 4C x 4 Sq.mm Mtrs 400

A7 11kV switchgear:

1 11kV,25kA, Metal clad VCB switchgear (1600A for incomer & 1250A for feeders) outdoor type, each comprising of 1I/c+4F+2CB+1AP (remote annunciation cum control panel )with CTs & PTs etc., completer as per technical specification. Note: 1. The switchgear for capacitor bank shall have necessary over voltage / under voltage / circulating current relays & other protection relays as per specification ) 2. The remote announciation cum control panel is simplex type. 3. The electronic trivector meters with ABT & TOD features, DLMS protocol energy meter has to be provided Set 1

A8 HV Cables:11kV UG cable with the required cable terminations at both ends

1 11 kV class 1 X 1000 Sq mm U G Cable XLPE (from 110/11kV transformers to 11kV switchgear) Mtr 400

2 11 kV class 3 X 240 Sq mm U G Cable XLPE (from 11kV switchgear to 11kV take off DP structure) Mtr 500

3 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type ) No. 4

4 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type) No. 4

5 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type ) No. 6

6 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type) No. 6

A9 Equipments for establishing SCADA Communication :

1 Multi Functional Transducer (MFT) 0.2S class including labour (market rate) No. 7

2 Opto Coupler ( 110V DC) including labour (market rate) No. 7

Cables -Supplying and Laying

3 Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core Mtr 70

4 Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core Mtr 35

5 Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core Mtr 70

6 Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core Mtr 35

Note: The actual materials/quantity required may be assertained in consultation with SEE SCADA

A10 Earth Mat formation :

1 Grounding of equipments with 50 x 6 mm GI flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor. Rmtr. 500

2 Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded all round the pipe etc., including cost of excavation (all materials supplied by contractor) providing & laying homogeneous mixture of charcoal lumps, salt and sand all round the pipe as per specfication set 16

3 Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits. No. 16

A11 STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder)

1 Supplying and erection of yard lighting structure alond with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N) 8.5mtr hight Nos 3

2 PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification. 2C x 6 sqmm Mtrs 210

Testing & Commissioning

Sl No. Name of the Equipment/Materials Unit Qty Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

A1 Power Transformer

1 Power Transformers: a) 20 MVA, 110/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake/Moose ACSR on primary side of transformer and 2 nos of copper flat for each phase from LV side of Transformer and 2 Nos of copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators as per specifications.(45 MT) No. 2

A2 Current Transformer

1 11kV class outdoor Current Transformer of ratio 1200-800/1-1-1 A with 0.2 accuracy class for 11kV Bank Incomer Nos. 6

2 11kV class, 25kA Neutral Current Transformer of ratio 1200-800/1-1-1 A for REFR protection with terminal connector suitable for 2 Nos. of Copper flats as per specifications. Nos. 2

A3 11kV switchgear:

1 11kV,25kA, Metal clad VCB switchgear (1600A for incomer & 1250A for feeders) outdoor type, each comprising of 1I/c+4F+2CB+1AP (remote annunciation cum control panel )with CTs & PTs etc., completer as per technical specification. Note: 1. The switchgear for capacitor bank shall have necessary over voltage / under voltage / circulating current relays & other protection relays as per specification ) 2. The remote announciation cum control panel is simplex type. 3. The electronic trivector meters with ABT & TOD features, DLMS protocol energy meter has to be provided Set 1

SL.NO. Decommisssioning UNIT QTY Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

D1 Labour charges:

1 Dismantling of 10 MVA, 110/11kV, Transformer with accessories complete with Transformer oil No/MT 2 35

2 Moving of Transformer from the plinth to the loading point as per direction of site Engineer. 35MT x 50Mtrs x2=3500 MT/Mtrs 70 50

3 Release of 11kV class NCT NO 2

4 Releasing of 11kV class CT NO 6

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3C(i) - Price Breakup for - Station Civil Portion.

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bidder's Name & Address alongwith GSTIN no. :

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

CIVIL WORKS PORTION : Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

Sl. No. Particulars Unit Qty.

B1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m cum 420

B2 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling, water,all materials,usage& all other appurtenaces required to complete the work. cum 65

B3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 270

B4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates cum 40

B5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (3% cosidered for Form work) cum 45

B6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- (70% considered for Form work) cum 16

B7 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (50% considered for Form work) cum 3

B8 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20mm nominal size graded crushed coarse aggregate (35% considered for Form work) cum 28

B9 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (60% considered for Form work) Ground Floor cum 9

B10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (45% considered for Form work) cum 4

B11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (50% considered for Form work) Ground Floor cum 15

B12 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings kg 9000

B13 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 3100

B14 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc excluding the cost of CI frame and cover. each 4

B15 Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with ppurtenances. complete. Medium Duty Set 4

B16 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. cum 30

B17 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 110

B18 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 200

B19 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge. sqm 78

B20 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. sqm 105

B21 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. sqm 105

B22 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 182

B23 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 15

B24 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. m 32

B25 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge kg 42

B26 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 25 mm dia 2 mm thick m 100

B27 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box point 4

B28 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box point 2

B29 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box point 16

B30 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm m 220

B31 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way each 4

B32 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 18

B33 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 24

B34 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition each 18

B35 Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders. each 18

B36 Providing and laying Non- Modular bricks in UG cable duct N0s 900

B37 Demolishing cement concrate manually/ by mechanical means including disposal of material of the appropriate disposal area as per direction of Emgineer-in-cahrage Cum 30

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Please fill Only in the Light Blue Couloured Cell.

Please key in the SlNo.,Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

These deviations and variations are exhaustive.Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

NOTE: 1 ) SHALL BE UPLOADED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

We have uploaded with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

Place Designation

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

a) * We have submitted bid as individual Bidder. (Key in Individual Bidder )

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium ) VOID

Name of Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

0.0 GENERAL INFORMATION

The Bidder, bidding for this package are requested to complete the information in the following form.

Sl. No. Particulars Bidder Details

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

0.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Bidder Details Indicate Yes/No In case of Consortium -VOID

(a) Written power of attorney of the signatory on the bid to commit the bidder.

1 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka as on the date of techno commercial Bid opening. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer IFT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer IFT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tender and Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed of similar nature in the last Ten years of Bidder as per Clause No: 3.2 (b) (i) of ITT

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/TBs/Length of the Line Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Note : 1 . The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid.

2. The qualifying experience of the Bidder who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of contract (Rs. Lakh) Stipulated period of cof Completion Value of works remaining to be completed ( Rs.Lakhs) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Ex-Works GST Total(Ex-works+GST)

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Estimated value of works (Rs. Lakh) Stipulated period of Completion Date when decision is expected Remarks if any

Ex-works GST Total(Ex-works+GST)

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. OR The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/ Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works

ii) A self-declaration is to be uploaded by the bidder stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct”.

iii. Bidders shall furnish Certificate from Chartered Accountants for split details of Ex-works values and GST of Contract values of the works in the prescribed format as at Clause No. 1.5 of Section-3: Qualification Information

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Following is the list of major supplied subsation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations. .

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bidder's Name & Address alongwith GSTIN no. : To

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Section 3 : 1.7 Reports on the financial standing of the tenderer, such as Profit and Loss Statements and Auditor’s reports in the preceeding last five years, Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Bidder Consortium Member - VOID

Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.) Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.)

Names of the constituent Firm VOID

1 Annual turn over for the last Five years Year(1) 2020-21 2020-21

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 9 (5 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

1.1 Constitution or legal status of Tenderer [Upload copy]

Place of Registration [Upload copy]

Principal place of business

Section - 3: 1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last Five years (in Rs. Lakhs)

1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs) of Bidder Financial Year Details

KPTCL works Non KPTCL works

Total value of works in Rs. Lakh Total value of works in Rs. Lakh

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, telephone number & e-mail id of the Tenderers' bankers who may provide references if contacted by the Employer:

1.9 Sl.No Name, address, telephone number & e-mail id of the Tenderers' bankers

Section 3: 1.12 Information on litigations in which the Tenderer is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-10 (1 of 3) Details of Tools and Plants available

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Following are the details of the Tools and Plants available with us.

Sl. No. Description Quantity Make Present Location / Project Remarks (if any)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (2 of 3) Details of Technical staff employed

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Section 3: 1.8 Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Sl. No. Name of the employee Designation Branch (Degree/Diploma) Year of Passing Since when employed in erection division Past Experience

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (3 of 3 )

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

BIDDER'S NAME AND ADDRESS:

We propose the following deployment of manpower for the substation and Line package.

Sl. No. Category MONTHS AFTER PLACEMENT OF AWARD LETTER

1 Project manager

2 Sr. Project Manager

5 Skilled labour

6 No skilled labour

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11 (A) : COMPLETION SCHEDULE FOR STATION/TERMINAL BAYS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bidders Name and Address: To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

We hereby declare that following schedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows

SL.NO Activity STATION PORTION

Commencement Completion

1 Detailed engineering

2 Procurement of bought out items / raw materials

3 Manufacturing & Testing

5 Setting up of site office, Sheds & stores etc.

7 Concreting for

a)Structure Foundations

b)Equipment and mounting structure foundadions

c)Cable trenches

2. Installation

8 Receipt(at site) of

a)Main equipment / spares

c)Insulators & Hardwares

d)Clamps & Connectors

e)Marshalling kiosks

f)Cables & Cabling Materials

a)Main structures

b)Equipment support structures

10 Equipment Erection

12 Bus bar erection

15 Completion of testing and ready for commissioning

16 Commissioning

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11B : COMPLETION SCHEDULE FOR TRANSMISSION LINES

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Bidders Name and Address: To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

We hereby declare that following shedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows.

SL.NO Activity Construction of Transmission Line

Commencement Completion

1 Submission of Drawings

2 Completion of detailed engineering

3 Commencement of Manufacturing

4 Completion of Manufacturing VOID

5 Readiness for testing

6 Readiness for Shipment

7 Receipt at Site

8 Completion of Shipment

1 Detailed Survey

2 Setting up of site office, sheds and stores etc.

3 Exacavation for foundations.

4 Foundations and other Civil Works

5 Erection of Tower alongwith accessories

6 Stringing of conductor/ groundwire alongwith accessories

7 Testing , Commissioning and Handing over.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 12 TYPE TESTS & TEST CHARGES OF EQUIPMENT/MATERIALS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

BIDDERS SHALL INDICATE VARIOUS TYPE TESTS IN LIGHT BLUE COLOURED CELLS

ALL THE TYPE TESTS APPLICABLE FOR EACH OF THE EQUIPMENTS SHALL BE INCLUDED.

Bidders Name and Address To,

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

SL.No Details of Equipments Type Test Test Charges ( in Rs )

1 Power Transformers:

2 SF6 Circuit Breakers:

3 Surge Arrestors

5 Control & Relay Panels / Relay & Protection Panels

6 L.T. A.C Panel

7 Station Battery

8 Station Battery Charger

9 1.1KV Power Cables

10 1.1kV Copper Control cables

11 11kV U.G Cable

12 Insulators a) 90KN Disc Insulator Strings

13 Equipment / Station Structures

14 Aluminium pipe and Clamps

15 Hardware Materials

16 Yard lighting equipments

17 Fire Fighting equipments

18 AC DISTRIBUTION BOX

19 DC DISTRIBUTION BOX

21 Auxiliary Transformer

NOTE: The Type Test / Special Tests, if repeated at the insistance of owner, the applicable testing charges shall be paid by the successful Bidder upfront to the laboratory and the same shall be reimbursable by KPTCL as per actuals on submission of Bills along with proof of payment and on successful completion of all the Type Tests, specified and on approval of the same by the owner. In case equipment/material fails in the type tests during testing then the testing charges paid by the Bidder to the laboratory will not be reimbursed by KPTCL. The above Clause is applicable for all the equipments/materials, in case, the Type Test / Special Tests, are repeated at the insistance of owner(KPTCL).

Place Printed Name

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

ipation in the said Bid,in addition to the Demand draft No.
dated

.
we the
Bank at
having our Head office at q
(local address) guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation
the amount of
(in figures and words)Á
without any reservation, protest, demur and recourse. Any such demand made by said `Owner' shall be conclusive and binding on us irrespective of any dispute or difference raised by the Bidder. O
This Guarantee shall be irrevocable and shall remain valid up to and including 
@¡
If any further extension of this guarantee is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions
from M/s )
on whose behalf this guarantee is issued.
This Guarantee has been issued using SFMS Platform and the requisite communication in this regard has been forwarded to the Beneficiary Bank.a
In witness whereof the Bank, through its authorised officer, has set its hand and stamp on this 
day of 
at 
Witness
Signature 
Name 
Official Addressess
Designation with Bank Stamp.&
Attorney as per Power of Attorney No.
Date 

Note : 1) Both the Bank Guarantee and Demand Draft shall be scanned and uploaded along with Electronic sheets. 2) This date shall be Forty Five (45) days after the last date for which the bid is valid. A
Karnataka Power Transmission Corporation Limited?
SCHEDULE-18 PROFORMA OF LETTER OF UNDERTAKINGS (ANNEXURE-V):
(To be executed on Non-Judicial paper of RequisiteValue) 
Ref W
1. I*/We* have read and examined the following bid documents relating to the 
(full Scope of Work)
a) Notice Inviitng Tender
b) Conditions of Contract containing section 'Invitation for Tenders , 'Instructions to Tenderers ,  Conditions of Contract and Contract Data. . 7
c) Special Conditions of Contract along with Annexure
to 
d) Drawings No.
e) Technical Specifications;
2 . I / We hereby submit our Bid and undertake to keep our Bid Valid for a period of One Hundred and Eighty days (180 days) from the Last date of bid submission as notified (either original or extended). I*/We* hereby further undertake that during said period I/We shall not vary/alter or revoke my/our Bid. Ð

This undertaking is in consideration of KPTCL agreeing to open my/ our Bid and consider and evaluate the same for the purpose of award of Work in terms of provisions of clause entitled "Award of Construct" 'cl.no. 26 of Section ITT and cl.no. 18 of SCC of the Bid Documents.
Should this bid be accepted, I*/We* also agree to abide by and fulfil all the terms, conditions of provision of the above mentioned bid.
Signature along with Seal of Co.A
(Duly Authorised to sign the Tender on Behalf of the Contractor.)
NAME
DESIGNATION 0
NAME OF THE COMPANY (in Block Letters)

WITNESS
SIGNATURE 
Date and Postal Address
DATE
Telegraphic Address
NAME AND ADDRESS
Telephone No.
Telex No.G
Karnataka Power Transmission Corporation Limited_
SCHEDULE-19 CONSORTIUM AGREEMENT ON NON JUDICIAL STAMP PAPER OF Rs.500/-(ANNEXURE -XIII) - VOIDF
NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.!
CONSORTIUM AGREEMENT AMONGST M/s 
For Bid Specification No.3
OF KARNATAKA POWER TRANSMISSION CORPORATION LIMITED4
This consortium agreement executed on this 
day!
Month of Two thousand Twenty Four
amongst M/s (
a company incorporated under the laws of-
(Country) and having its registered office atx
(hereinafter called the "Lead Company" which expression shall include its successors ,executors and permitted assigns),
M/s 
(hereinafter called the "Constituent Company" which expressions shall include its successors,executors and permitted assigns) n
for the purpose of making a bid and entering into a contract (In case of award) against the specification no.
For
NAME OF THE WORKõ

for Karnataka Power Transmission Corporation Ltd. having its registered office at Kaveri Bhavan , Bangalore 560 009 , Karnataka (hereinafter called the "Owner"). The leader of the consortium shall abide by the general terms and conditions specified by the Purchaser. WHEREAS the Owner invited bids as per the above mentioned specifications for the design, manufacture, supply and erection, testing and commissioning of Equipments/Materials stipulated in the bidding documents under subject package ǫ䄁一䐀 圀䠀䔀刀䔀䄀匀 匀攀挀琀椀漀渀ⴀ䤀 ⠀ 嘀漀氀甀洀攀ⴀ㄀㨀 䌀氀愀甀猀攀 一漀⸀ ㄀㄀㨀ⴀ 儀甀愀氀椀昀礀椀渀最 刀攀焀甀椀爀攀洀攀渀琀⤀Ⰰ 昀漀爀洀椀渀最 瀀愀爀琀 漀昀 琀栀攀 戀椀搀搀椀渀最 搀漀挀甀洀攀渀琀猀Ⰰ 猀琀椀瀀甀氀愀琀攀猀 琀栀愀琀 愀 挀漀渀猀漀爀琀椀甀洀 洀攀攀琀椀渀最 琀栀攀 爀攀焀甀椀爀攀洀攀渀琀猀 漀昀 匀攀挀琀椀漀渀ⴀ䤀Ⰰ ⠀ 䤀渀瘀椀琀愀琀椀漀渀 漀昀 䈀椀搀⤀ 愀瀀瀀氀椀挀愀戀氀攀 洀愀礀 戀椀搀Ⰰ 瀀爀漀瘀椀搀攀搀 琀栀攀 䌀漀渀猀漀爀琀椀甀洀 昀甀氀昀椀氀氀猀 愀氀氀 漀琀栀攀爀 爀攀焀甀椀爀攀洀攀渀琀猀 漀昀 猀瀀攀挀椀昀椀挀愀琀椀漀渀 愀渀搀 椀渀 猀甀挀栀 愀 挀愀猀攀Ⰰ 琀栀攀 䈀椀搀 猀栀愀氀氀 戀攀 猀椀最渀攀搀 戀礀 琀栀攀 洀攀洀戀攀爀猀 猀漀 愀猀 琀漀 氀攀最愀氀氀礀 戀椀渀搀 琀栀攀 洀攀洀戀攀爀猀 愀渀搀 眀栀漀 眀椀氀氀 戀攀 樀漀椀渀琀氀礀 愀渀搀 猀攀瘀攀爀愀氀氀礀 氀椀愀戀氀攀 琀漀 瀀攀爀昀漀爀洀 琀栀攀 䌀漀渀琀爀愀挀琀 愀渀搀 愀氀氀 漀戀氀椀最愀琀椀漀渀猀 栀攀爀攀甀渀搀攀爀⸀ĀThe above clause further states that the consortium agreement shall be attached to the bid and the contract performance guarantee will be as per the format enclosed with the bidding document without any restriction or liability for either party.D䄁一䐀 圀䠀䔀刀䔀䄀匀 琀栀攀 戀椀搀 栀愀猀 戀攀攀渀 猀甀戀洀椀琀琀攀搀 琀漀 琀栀攀 伀眀渀攀爀 瘀椀搀攀 瀀爀漀瀀漀猀愀氀 一漀ԀĀdatedÃ戁礀 䰀攀愀搀 䌀漀洀瀀愀渀礀 戀愀猀攀搀 漀渀 琀栀攀 䌀漀渀猀琀椀琀甀攀渀琀 愀最爀攀攀洀攀渀琀 戀攀琀眀攀攀渀 愀氀氀 琀栀攀 挀漀渀猀漀爀琀椀甀洀 甀渀搀攀爀 琀栀攀猀攀 瀀爀攀猀攀渀琀猀 愀渀搀 琀栀攀 戀椀搀 椀渀 愀挀挀漀爀搀愀渀挀攀 眀椀琀栀 琀栀攀 爀攀焀甀椀爀攀洀攀渀琀猀 漀昀 匀瀀攀挀椀昀椀挀愀琀椀漀渀猀 ⠀儀甀愀氀椀昀椀挀愀琀椀漀渀 刀攀焀甀椀爀攀洀攀渀琀猀⤀⸀㌀ĀNOW THEREFORE THIS UNDERTAKING WITNESSETH AS UNDER:‚䤁渀 挀漀渀猀椀搀攀爀愀琀椀漀渀 漀昀 琀栀攀 愀戀漀瘀攀 瀀爀攀洀椀猀攀猀 愀渀搀 愀最爀攀攀洀攀渀琀猀 愀氀氀 琀栀攀 瀀愀爀琀渀攀爀猀 琀漀 琀栀椀猀 挀漀渀猀漀爀琀椀甀洀 洀攀洀戀攀爀猀 搀漀 栀攀爀攀戀礀 渀漀眀 愀最爀攀攀 愀猀 昀漀氀氀漀眀猀㨀鰀Ā In Consideration of the award of the Contract by the Owner to the Consortium members, we , the members to the consortium agreement do hereby agree that M/sĶ猁栀愀氀氀 愀挀琀 愀猀 䰀攀愀搀 䌀漀洀瀀愀渀礀 愀渀搀 昀甀爀琀栀攀爀 搀攀挀氀愀爀攀 愀渀搀 挀漀渀昀椀爀洀 琀栀愀琀 眀攀 猀栀愀氀氀 樀漀椀渀琀氀礀 愀渀搀 猀攀瘀攀爀愀氀氀礀 戀攀 戀漀甀渀搀 甀瀀 琀漀 琀栀攀 伀眀渀攀爀 昀漀爀 琀栀攀 猀甀挀挀攀猀猀昀甀氀 瀀攀爀昀漀爀洀愀渀挀攀 漀昀 琀栀攀 挀漀渀琀爀愀挀琀 愀渀搀 猀栀愀氀氀 戀攀 昀甀氀氀礀 爀攀猀瀀漀渀猀椀戀氀攀 昀漀爀 琀栀攀 搀攀猀椀最渀Ⰰ 洀愀渀甀昀愀挀琀甀爀攀Ⰰ 猀甀瀀瀀氀礀 愀渀搀 猀甀挀挀攀猀猀昀甀氀 瀀攀爀昀漀爀洀愀渀挀攀 漀昀 琀栀攀 攀焀甀椀瀀洀攀渀琀猀 椀渀 愀挀挀漀爀搀愀渀挀攀 眀椀琀栀 琀栀攀 䌀漀渀琀爀愀挀琀⸀娀ā In case of any breach of the said contract by the Lead company or other constituent of the Consortium agreement, the Lead company do hereby agree to be fully responsible for the successful performance of the contract and to carryout all the obligations and responsibilities under the contract in accordance with the requirements of the Contractȧ 䘀甀爀琀栀攀爀Ⰰ 椀昀 琀栀攀 伀眀渀攀爀 猀甀昀昀攀爀猀 愀渀礀 氀漀猀猀 漀爀 搀愀洀愀最攀 漀渀 愀挀挀漀甀渀琀 漀昀 愀渀礀 戀爀攀愀挀栀 椀渀 琀栀攀 挀漀渀琀爀愀挀琀 漀爀 愀渀礀 猀栀漀爀琀昀愀氀氀 椀渀 琀栀攀 瀀攀爀昀漀爀洀愀渀挀攀 漀昀 琀栀攀 攀焀甀椀瀀洀攀渀琀 椀渀 洀攀攀琀椀渀最 琀栀攀 瀀攀爀昀漀爀洀愀渀挀攀 最甀愀爀愀渀琀攀攀搀 愀猀 瀀攀爀 琀栀攀 猀瀀攀挀椀昀椀挀愀琀椀漀渀 椀渀 琀攀爀洀猀 漀昀 琀栀攀 挀漀渀琀爀愀挀琀Ⰰ 琀栀攀 䰀攀愀搀 挀漀洀瀀愀渀礀 漀昀 琀栀攀猀攀 瀀爀攀猀攀渀琀猀 甀渀搀攀爀琀愀欀攀 琀漀 瀀爀漀洀瀀琀氀礀 洀愀欀攀 最漀漀搀 猀甀挀栀 氀漀猀猀 漀爀 搀愀洀愀最攀猀 挀愀甀猀攀搀 琀漀 琀栀攀 伀眀渀攀爀Ⰰ 漀渀 椀琀猀 搀攀洀愀渀搀 眀椀琀栀漀甀琀 愀渀礀 搀攀洀甀爀⸀ 䤀琀 猀栀愀氀氀 渀漀琀 戀攀 渀攀挀攀猀猀愀爀礀 漀爀 漀戀氀椀最愀琀漀爀礀 昀漀爀 琀栀攀 伀眀渀攀爀 琀漀 瀀爀漀挀攀攀搀 愀最愀椀渀猀琀 䰀攀愀搀 倀愀爀琀渀攀爀 琀漀 琀栀攀猀攀 瀀爀攀猀攀渀琀猀 戀攀昀漀爀攀 瀀爀漀挀攀攀搀椀渀最 愀最愀椀渀猀琀 漀爀 搀攀愀氀椀渀最 眀椀琀栀 琀栀攀 漀琀栀攀爀 倀愀爀琀渀攀爀 ⠀猀⤀⸀錀āThe Financial liability of the members of the consortium agreement to the Owner, with respect to any of the claims arising out of performance or non-performance of the obligations set forth in the said agreement, read in conjunction with the relevant conditions of the contract shall, however not be limited in any way so as to restrict or limit the liabilities of any of the members of the agreement.Ɉ䤁琀 椀猀 攀砀瀀爀攀猀猀氀礀 甀渀搀攀爀猀琀漀漀搀 愀渀搀 愀最爀攀攀搀 戀攀琀眀攀攀渀 琀栀攀 洀攀洀戀攀爀猀 琀漀 琀栀椀猀 挀漀渀猀漀爀琀椀甀洀 愀最爀攀攀洀攀渀琀 琀栀愀琀 琀栀攀 爀攀猀瀀漀渀猀椀戀椀氀椀琀椀攀猀 愀渀搀 漀戀氀椀最愀琀椀漀渀猀 漀昀 攀愀挀栀 漀昀 琀栀攀 瀀愀爀琀渀攀爀猀 猀栀愀氀氀 戀攀 愀猀 搀攀氀椀渀攀愀琀攀搀 栀攀爀攀甀渀搀攀爀 ⠀吀漀 戀攀 椀渀挀漀爀瀀漀爀愀琀攀搀 猀甀椀琀愀戀氀礀 戀礀 琀栀攀 洀攀洀戀攀爀 琀漀 琀栀椀猀 愀最爀攀攀洀攀渀琀⤀⸀ 䠀漀眀攀瘀攀爀Ⰰ 攀愀挀栀 洀攀洀戀攀爀 漀昀 琀栀攀 挀漀渀猀漀爀琀椀甀洀 眀椀氀氀 戀攀 猀攀瘀攀爀愀氀氀礀 愀渀搀 樀漀椀渀琀氀礀 爀攀猀瀀漀渀猀椀戀氀攀 昀漀爀 琀栀攀 昀愀椀琀栀昀甀氀 瀀攀爀昀漀爀洀愀渀挀攀 漀昀 琀栀攀 挀漀渀琀爀愀挀琀⸀ 䤀琀 椀猀 昀甀爀琀栀攀爀 愀最爀攀攀搀 戀礀 琀栀攀 洀攀洀戀攀爀 琀栀愀琀 琀栀攀 愀戀漀瘀攀 猀栀愀爀椀渀最 漀昀 爀攀猀瀀漀渀猀椀戀椀氀椀琀椀攀猀 愀渀搀 漀戀氀椀最愀琀椀漀渀猀 猀栀愀氀氀 渀漀琀 椀渀 愀渀礀 眀愀礀 戀攀 愀 氀椀洀椀琀愀琀椀漀渀 漀昀 樀漀椀渀琀 愀渀搀 猀攀瘀攀爀愀氀 爀攀猀瀀漀渀猀椀戀椀氀椀琀椀攀猀 漀昀 琀栀攀 洀攀洀戀攀爀猀 甀渀搀攀爀 琀栀椀猀 挀漀渀琀爀愀挀琀⸀ ⬀ĀName of the Lead Bidder/Consortium Partner.匁挀漀瀀攀 漀昀 琀栀攀 眀漀爀欀⼀倀愀爀琀椀挀椀瀀愀琀椀漀渀帀ĀWe further declare ourselves bound to execute our scope of work/participation as stated above;É吁栀椀猀 䌀漀渀猀漀爀琀椀甀洀 愀最爀攀攀洀攀渀琀 猀栀愀氀氀 戀攀 挀漀渀猀琀爀甀挀琀攀搀 愀渀搀 椀渀琀攀爀瀀爀攀琀攀搀 椀渀 愀挀挀漀爀搀愀渀挀攀 眀椀琀栀 琀栀攀 氀愀眀猀 漀昀 䤀渀搀椀愀 愀渀搀 琀栀攀 挀漀甀爀琀猀 漀昀 䈀愀渀最愀氀漀爀攀 猀栀愀氀氀 栀愀瘀攀 琀栀攀 攀砀挀氀甀猀椀瘀攀 樀甀爀椀猀搀椀挀琀椀漀渀 椀渀 愀氀氀 洀愀琀琀攀爀猀 愀爀椀猀椀渀最 琀栀攀爀攀 甀渀搀攀爀⸀ँ In case of an award of a Contract, we the Consortium members do hereby agree that we shall be jointly & severally responsible for the works respectively executed and Lead company shall furnishing a contract performance security from a bank in favor of the PURCHASER in the forms acceptable to purchaser for value of Five percent (5%) of the total Contract Price plus additional security for unbalanced tenders in accordance with Clause 25.5 & 29 of ITT and Clause 43 of the CC (Conditions of Contract).ľǷĞ䤁琀 椀猀 昀甀爀琀栀攀爀 愀最爀攀攀搀 琀栀愀琀 琀栀攀 䌀漀渀猀漀爀琀椀甀洀 愀最爀攀攀洀攀渀琀 猀栀愀氀氀 戀攀 椀爀爀攀瘀漀挀愀戀氀攀 愀渀搀 猀栀愀氀氀 昀漀爀洀 愀渀 椀渀琀攀最爀愀氀 瀀愀爀琀 漀昀 琀栀攀 挀漀渀琀爀愀挀琀Ⰰ 愀渀搀 猀栀愀氀氀 挀漀渀琀椀渀甀攀 琀漀 戀攀 攀渀昀漀爀挀攀愀戀氀攀 琀椀氀氀 琀栀攀 漀眀渀攀爀 搀椀猀挀栀愀爀最攀猀 琀栀攀 猀愀洀攀⸀ 䤀琀 猀栀愀氀氀 戀攀 攀昀昀攀挀琀椀瘀攀 昀爀漀洀 琀栀攀 搀愀琀攀 昀椀爀猀琀 洀攀渀琀椀漀渀攀搀 愀戀漀瘀攀 昀漀爀 愀氀氀 瀀甀爀瀀漀猀攀猀 愀渀搀 椀渀琀攀渀琀猀⸀਀਀혀ĀIN WITNESS WHEREOF the partners to the Consortium have through their authorized representatives executed these presents and affixed Common seals of their companies, on the day, month and year first mentioned above.昁漀爀 䰀攀愀搀 䌀漀洀瀀愀渀礀 ଀Ā(Signature),⠁匀椀最渀愀琀甀爀攀 漀昀 琀栀攀 愀甀琀栀漀爀椀稀攀搀 爀攀瀀爀攀猀攀渀琀愀琀椀瘀攀⤀ᜀĀ(Name in Block Letters)⠁一愀洀攀⤀ഀĀ(Designation)䌁漀洀洀漀渀 匀攀愀氀 漀昀 琀栀攀 䌀漀洀瀀愀渀礀ᘀĀ ( For Constituent 1),匁䌀䠀䔀䐀唀䰀䔀ⴀ㈀ 倀伀圀䔀刀 伀䘀 䄀吀吀伀刀一䔀夀 ⠀䄀一一䔀堀唀刀䔀ⴀ堀䤀⤀ᄀĀPOWER OF ATTORNEY¢⠁吀漀 戀攀 猀琀愀洀瀀攀搀 漀渀 刀猀⸀㔀 ⼀ⴀ 一漀渀 䨀甀搀椀挀椀愀氀 猀琀愀洀瀀 瀀愀瀀攀爀 椀渀 愀挀挀漀爀搀愀渀挀攀 眀椀琀栀 䬀倀吀䌀䰀 䌀椀爀挀甀氀愀爀 一漀⸀ 䬀倀吀䌀䰀⼀䜀䴀吀⼀䌀䤀嘀䤀䰀 ⠀䈀㜀⤀⼀㌀㔀⼀㈀ ㈀㐀ⴀ䴀䄀一䄀䜀䔀刀 䔀匀吀䄀吀䔀 ⠀䔀ⴀ㄀ 㘀㤀㤀㈀⤀ 搀愀琀攀搀 ㈀⸀ ㌀⸀㈀ ㈀㐀⤀✀ĀKNOW ALL MEN BY THESE PRESENTS that we 愁 䌀漀洀瀀愀渀礀 椀渀挀漀爀瀀漀爀愀琀攀搀 ሀĀunder the laws of 2愁渀搀 栀愀瘀椀渀最 椀琀猀 刀攀最椀猀琀攀爀攀搀 伀昀昀椀挀攀 ⼀ 䠀攀愀搀 伀昀昀椀挀攀 愀琀 䜀Ā"Manufacturer / Bidder" which expression shall unless repugnant to the P䌁漀渀琀攀砀琀 漀爀 洀攀愀渀椀最 琀栀攀爀攀漀昀Ⰰ 椀渀挀氀甀搀攀 椀琀猀 猀甀挀挀攀猀猀漀爀猀Ⰰ 愀搀洀椀渀椀猀琀爀愀琀漀爀猀 愀渀搀 愀猀猀椀最渀猀⤀ ሀĀacting through Mr%椁琀猀 挀漀渀猀琀椀琀甀琀攀Ⰰ 渀漀洀椀渀愀琀攀 愀渀搀 愀瀀瀀漀椀渀琀 ⤀Āa Company incorporated under the laws of ,愁渀搀 栀愀瘀椀渀最 椀琀猀 刀攀最椀猀琀攀爀攀搀 ⼀ 䠀攀愀搀 伀昀昀椀挀攀 愀琀 䜀Āas its duly constituted lawful Attorney (hereinafter called "Attorney"P 漀爀 ∀䄀甀琀栀漀爀椀稀攀搀 刀攀瀀爀攀猀攀渀琀愀琀椀瘀攀∀⤀ 琀漀 攀砀攀爀挀椀猀攀 愀氀氀 漀爀 愀渀礀 漀昀 琀栀攀 瀀漀眀攀爀猀 昀漀爀 愀渀搀 漀渀䔀Ā behalf of the "Manufacturer / Bidder" in regard to Specification No.倁愀挀欀愀最攀✀Āthe bids for which have been invited by2⠁䄀搀搀爀攀猀猀 ∀伀眀渀攀爀∀⤀ 琀漀 甀渀搀攀爀琀愀欀攀 琀栀攀 昀漀氀氀漀眀椀渀最 愀挀琀猀㨀ȀĀi.|吁漀 猀甀戀洀椀琀 瀀爀漀瀀漀猀愀氀 愀渀搀 瀀愀爀琀椀挀椀瀀愀琀攀 椀渀 琀栀攀 愀昀漀爀攀猀愀椀搀 䈀椀搀 匀瀀攀挀椀昀椀挀愀琀椀漀渀 漀昀 琀栀攀 伀眀渀攀爀 漀渀 戀攀栀愀氀昀 漀昀 琀栀攀 ∀䴀愀渀甀昀愀挀琀甀爀攀爀 ⼀ 䈀椀搀搀攀爀∀⸀̀Āii.Ø吁漀 渀攀最漀琀椀愀琀攀 眀椀琀栀 琀栀攀 ∀伀眀渀攀爀∀ 琀栀攀 琀攀爀洀猀 愀渀搀 挀漀渀搀椀琀椀漀渀猀 椀渀挀氀甀搀椀渀最 瀀爀椀挀攀 昀漀爀 愀眀愀爀搀 漀昀 琀栀攀 挀漀渀琀爀愀挀琀 瀀甀爀猀甀愀渀琀 琀漀 琀栀攀 愀昀漀爀攀猀愀椀搀 䈀椀搀 愀渀搀 琀漀 猀椀最渀 琀栀攀 挀漀渀琀爀愀挀琀 眀椀琀栀 琀栀攀 ∀伀眀渀攀爀∀ 昀漀爀 愀渀搀 漀渀 戀攀栀愀氀昀 漀昀 琀栀攀 䴀愀渀甀昀愀挀琀甀爀攀爀 ⼀ 䈀椀搀搀攀爀⸀ЀĀiii.\吁漀 爀攀挀攀椀瘀攀 愀挀挀攀瀀琀 愀渀搀 攀砀攀挀甀琀攀 琀栀攀 挀漀渀琀爀愀挀琀 昀漀爀 愀渀搀 漀渀 戀攀栀愀氀昀 漀昀 琀栀攀 ∀䴀愀渀甀昀愀挀琀甀爀攀爀 ⼀ 䈀椀搀搀攀爀∀⸀̀Āiv.@吁漀 搀漀 愀渀礀 漀琀栀攀爀 愀挀琀 漀爀 猀甀戀洀椀琀 愀渀礀 搀漀挀甀洀攀渀琀 爀攀氀愀琀攀搀 琀漀 琀栀攀 愀戀漀瘀攀⸀㴀ĂIt is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.Q 䤀一 圀䤀吀一䔀匀匀 圀䠀䔀刀䔀伀䘀 吀䠀䔀 ∀䴀愀渀甀昀愀挀琀甀爀攀爀 ⼀ 䈀椀搀搀攀爀∀ 栀愀猀 攀砀攀挀甀琀攀搀 琀栀攀猀攀 瀀爀攀猀攀渀琀猀 愀琀 ฀Āon this day of甁渀搀攀爀 㔀Āthe Common Seal of the Manufacturer company / Bidder.%匁瀀攀挀椀洀攀渀 匀椀最渀愀琀甀爀攀 漀昀 䄀琀琀漀爀渀攀礀 䠀漀氀搀攀爀᐀Ā(Name & Designation)䘁漀爀 愀渀搀 漀渀 戀攀栀愀氀昀 漀昀ⰀĀCommon Seal of the above Manufacturer/Bidder-䠁愀猀 戀攀攀渀 愀昀昀椀砀攀搀 琀栀攀爀攀琀漀 椀渀 琀栀攀 瀀爀攀猀攀渀挀攀 漀昀 㨀଀ĀWITNESSES : 企挀挀甀瀀愀琀椀漀渀氀

Bidders Name and Address

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

Place Designation

Name of the Company

SHEET FOR TECHNOCOMMERCIAL OPENING

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

The Chief Engineer Electy, Transmission (Operations) Zone, KPTCL, Kalaburagi

6 Aluminium pipe and Clamps

12 Auxiliary Transformer

15 AC DISTRIBUTION BOX

16 DC DISTRIBUTION BOX

Place Designation

Name of the Company

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

Defects Liability Period/Guarantee

Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/ SS/Sirigeri Cross CALL-4 Dtd: 16.05.2026

Replacement of existing 2x10MVA, 110/11kV by 2x20MVA, 110/11kV Power Transformer and providing additional MCVCB switchgear at 110kV Sirigeri Cross S/s in Siruguppa Tq., Ballari Dist. on Partial Turnkey Basis. CALL-4