SPECIAL REPAIRS/REPLACEMENT OF EXISTING CONVENTIONAL TUBE LIGHTS TO LED LIGHTS INCLUDING CONVERTION OF ALUMINIUM WIRING TO COPPER WIRING AT P-43 BUILDING MWC AND CONVERSION OF CONVENTIONAL LIGHTS WITH LED LIGHTS IN VARIOUS STORE HOUSES OF MO(K) AT NA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CML No. single core multistranded cable in and including medium grade concealed PVC conduit not less than 20mm dia and accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and including 1.6 mm thick MS sheet/ pressed steel sunken boxes depth not less than 50mm (earth dolly) duly painted with two coats of anti corrosive paint / aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paints over a coat of red oxide primer externally covered with 3 mm thick plastic laminated sheet cover for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multistranded cable as earth continuity wirefor one light/fan point controlled by one switch.

All as per item No 2.above but for one 5 pin 5 amps socket outlet on the same board

All as per item No 2.above but for one 5 pin 5 amps socket outlet an independent board.

All as per item No 2 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board.

All as per item No 2 above but with 4 Sqmm copper conductor including 4 Sqmm copper cable on earth wire for one 3 Pin 16 Amps Socket outlet independent board.

S&F switch piano flush type 5A one way

S&F Switch Socket combination 5 pin 5 Amps flush type

S&F Switch Socket combination 6 pin 15 Amps flush type multi purpose.

S&F ceiling rose surface bakelite 65 x 50mm, 3 terminals

M&L for taking down 450/350/300mm sweep exhaust fan, preparing the surfaces of exhaust fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan complete all as specified.

M&L for taking down 1200/1400mm sweep ceiling fan, preparing the surfaces of ceiling fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan complete all as specified.

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

Supply and fix LED security light 45 W IP 65 protection including all accessories and suitable GI pipe bracket for fixing on wall including all connection all as specified and dirceted by Engineer in charge.MAKE: Havells cat part No ENDURAPEARLNEOSL45WLED757PASYTOPC/Bajaj/CG

Taking down old DBs from existing position including MCBs all as specified and as directed.

S&F Sheet metal enclosure SPN DB when MCBs to be used 8 way with 200 amps bus bar double door

S&F Sheet metal enclosure TPN DB when MCBs to be used 8way with 200 amps bus bar double door

S&F 3 pole MCCB 125A, 25KA, 415V with enclosure complete. Make- Havells Cat No. MCCB-IHLASDCT0125#, Enclosure cat No. IHEATP or equivalent make of L&T/Schneider.

S&F MCB TPN 63 Amps,415 Volt, complete all as specified and directed. Legrand Cat Part No. 4087 02 or equivalent make of L&T/Schneider.

S&F MCB SPN 32 amp, 240 volts, 10 KA including all electrical connection all as specified and as directed,Make-Legrand Cat Part No. 4086 18 or equivalent make of L&T/Schneider.

S/F MCB SP 6 Amps to 32 Amps 240 volt ,all as specified and directed,capacity complete all as specified and directed,Make-Legrand Cat Part No. 4085 87 to 4085 95 or equivalent make of L&T/Schneider.

S & F in repair SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 KA, including taking down old unserviceable earth plug complete all as specified.

Taking down old sub main wiring of any size

M&L for sub main wiring with 4 runs of 16 Sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 2 run of 10 Sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good distrubed surface to match with existing surface. Note:- 4 runs of 16 Sqmm sub main wire and two run of 10 sq mm for earthing and PVC conduit with accessories together will be measured and paid as one run of wiring.

M&L for submain wiring with 2 runs of 6 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through PVC consealed conduit with all accessories on surface, one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLS cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:- 2 runs of 6 Sqmm size copper conductor cable, One run of 4 Sqmm size copper conductor cable and one run of PVC conduit with accessories together will be measured and paid as one run of wiring.

All as per item No 25 here-in-before but 2 runs of 4 sq mm single core FRLSH copper conductor and 1 run of 2.5 sqmm conductor for earthing. Note:- 2 runs of 4 Sqmm size copper conductor cable, One run of 2.5 Sqmm size copper conductor cable and one run of PVC conduit with accessories together will be measured and paid as one run of wiring.

Taking down old Tube light fitting of any wattage, type , model or make incl making good wall surfaces .

Supply and fix LED tube fittings of 2" long 10 W,230 volt, including making necessary connections all as specified & directed. Make : Philips Cat Part No. BN 021 LED 10S-6500/ PSU GR S1 or equivalent make of Luker/ Havells.

Supply and fix LED flat panel with high brightness with glare free recessed 2 feet by 2 feet 36/40 Watt endura slim pro plus fitting including all connection all as specified and directed. Make Philips Cat Part No. RC380BLED36S-6500G4L60PSUOD or equivalent make of Havells/ Crompton.

S&F recessed LED slim luminarie of max wattage 36 W,240V, 50 HZ, system lumen output 3000 lm with extruded aluminium white powder coated housing and electronic LED driver prewired upto terminal block including all connection all as specified and and as directed.Make Crompton Cat Part No. LCTLRF1-36-TL or equivalent make of Havells/ Crompton.

S&F Tube light fitting 1 x20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one complete all as specified and directed. Make: Philips Cat part No;TMC501 P 20W 1XT LED P3241+ESSENTIAL LED TUBE 20W 1200MM 20W 865 T8 IND/HAVELLS/WIPRO or equivalent make of Havells/ Crompton.

S&F 07W LED mirror light fitting 7W with tube and provided with high output diffuser including all electrical connection all as specified and dirceted by Engineer in charge.Cat part no LCL-07-CDL of crompton or equivalent make of Philips/Wipro

M&L for earthing complete with galvanised steel earth plate elctrode 60 x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm as earthing lead by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.point 5 connected to earthing test point all as specified or indicated including testing on completion.

Taking down existing high bay fittings of any wattage, type , model or make.

Taking down existing 1x40 Watt Tube light fitting of any model or make.

Taking down existing 2x40 Watt Tube light fitting of any model or make.

Taking down existing building security light fitting of any model or make.

Taking down existing conventional tube rod of 1x40/36 Watt with ballast, starter etc.

Supply and fix LED security street light fitting with 36 watts, P66 protection, min 100 lumens per watt light output, 5KV external drive and 4KV internal drive surge protection, power factor 0.95, THD less than 10%. Potted driver with RoHs and CE marking, fitting comprises of unique fitting arm tilting option, die cast aluminium housing and heat resistant toughened glass. Make Luker Cat Part no. LST36 or equivalent make of Philips/ Bajaj

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 22 Watt, both side connection all as specified and as directed. Make : Havells Cat Part No. REGALBATTENT8 upto 1x22W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or equivalent make of Philips/ Luker.

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 2 x 22 Watt, both side connection all as specified and as directed. Make : Havells Cat Part No. REGALBATTENT8 upto 2x22W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS (with 2 tube rods) for tube rod or equivalent make of Philips/ Luker.

Supply and fix LED tube rod 20W, both side connections on existing box type fittings including making necessary connections all as specified & directed. Make : Havells Cat Part No. Crystal 1213T8DSTL20WLED865SGLASS. or equivalent make of Bajaj/Luker.

Supply & Fix High bay lights indoor type IP66 made out of aluminium cast suitable for 1x100 watt and connecting to existing electrical system all as specified and directed. Make Luker Cat Part No. LOHY100 or equivalent make of Wipro/Surya.

S&F LED flood light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection, 3000 K, with 10 KV SPD of 50 watt of all as specified and directed including taking down of existing light fitting of any type and make. Make Crompton, Cat Part No. LFL-50-CDL/ Jaguar Cat Part No. LFLD02S050XW/ Philips Cat Part No. BVP 161 LED 43 NW/CW/WW 50W

Supply and fix in repair, LED security street light fitting with 25 watts, P66 protection, min 100 lumens per watt light output, 5KV external drive and 4KV internal drive surge protection, power factor 0.95, THD less than 10%. Potted driver with RoHs and CE marking, fitting comprises of unique fitting arm tilting option, die cast aluminium housing and heat resistant toughened glass including taking down existing old unserviceable MH/HPSV fittings. Make Crompton Cat Part no. LSTS-25CDL, Philips Cat Part No. BRP020LEDHP/CW240V25, Crompton Cat Part No. LSTS-25-CDL

Supply and fix LED flat panel with high brightness with glare free surface mounted 2 feet by 2 feet 36/40 Watt fitting including all connection all as specified and directed. Make: Crompton Cat Part No. LCTLSNE-36-FO-TL or Havells/Philips

S&F in repair Decorative wall light fixture made up of polycarbonate ,suatable for B-22 base ,unbreakable fixed on wall including all connection and LED bulb of suitable size all as specified and directed by engineer in charge make -Havells Cat part no LHFOFUE1TZ1W012 or in Philips / Wipro.

M/s T.P SHAJI

P N Enterprises

SREENARAYANA ENTERPRISES

Jyothis Enterprises

PHEJAYS AGENCIES

M/s.Rejoy Constructions

Oriental Constructions