CONSTRUCTION OF READING ROOM & HEALTH CLUB AT MOJE: VALAK, NEW BLOCK/ R.S NO. 69 (OLD BLOCK NO.62) AMINITIES SPACE IN NEW EAST ZONE (SARTHANA), SURAT

Excavation for foundation including sorting out and stacking off

useful materials and disposing of the excavated stuff up to 50 mt.

lead and all lift, watering etc.comp. (A) loose or soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 1120.00 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

2 disposal of the surplus excavated soil as directed within a lead of

50 M. For following diameter of piles.

250mm dia 50.00 Rmt 326.84

SMC SOR , ITEM NO. 94, PG. NO.

Providing & Filling Rubbles including hand packing & filling

interstics with Quarry Spalls complete for all leads and lifts.

SMC SOR , ITEM NO. 22, PG. NO. 3 114.00 C.M. 1064.80

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand : 6 Crushed

4 stone agg 20m.m Nominal size) &curing comp. excl. cost of form

work in :(a) foundation & Plinth

(A) Foundation 70.00 C.M. 3005.76

(C) Grade Slab 6.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

graded stone agg. 20 mm nominal size) & curing comp. Includ. cost

5 of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of columns and

(C) Grade slab 59.00 C.M. 3637.34

(SOR SMC Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete 162.00 C.M. 4180.62

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest

7 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12587.74

(2) Having cross sectional area more than 0.085 sq. mt .up to

(3) Having cross sectional area more than 0.12 sq. mt. 22.00 C.M. 9190.79

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86

(2) Having cros sectional area more than 0.08 sq. mt and upto

(3) Having cross sectional area more than 0.12 sq. mt . 46.00 C.M. 6999.09

(SOR SMC - MIX DESIGN PG. NO-14)

DESCRIPTION Qty. UNIT AMOUNT

(1) Slabs having more than 8 Cm & upto 10 Cm thickness. 0.00 C.M. 7887.74

(2) Slabs having more than 10 Cm & upto 13 Cm

(3) Slabs having more than 13 Cm thickness. 4.00 C.M. 6727.93

(SOR SMC - MIX DESIGN PG. NO-14)

(E) RCC Wall - 200 mm Thick 13.00 C.M. 7946.64

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

8 R.C.C. work incl. bending, binding & placing in position etc.comp.---

Upto G.L./P.L. 31590.00 Kg. 76.21

(SOR SMC Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

(SOR SMC Pg No. 1 It No. 9) 102.00 C.M. 4237.00

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 1745.00 C.M. 130.39

Filling in foundation and plinth with murrum or selected soil in

11 layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 476.00 C.M. 289.06

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

12 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Upto G.L./P.L. 70.00 S.M 237.51

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

13 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Upto G.L./P.L. 23.00 S.M 214.60

(SOR SMC Pg No. 3 It No. 24)

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

14 proforma duly stamped (2) The rate shall include for work at all 176.00 S.M

floors & conducting water proof test as directed. (M.R.)

Proiding & laying water proofing treatment to vertical and

horizontal surfaces like consisting of (a) I course of applying

cement slurry 4.4 kg per sq.mt. mixed with water proofing

compound confirming to IS:2645 in rcommended proportions. (b)

II corse of 20mm cement plaster 1:3 mixed with water proofing

compound in recommended proportion (c) III course of applying

blown or / resideal bitumen applied hot at 1.7 kg per sqm of area.

(d) IV course of 400mm micron th. PVC sheet. (Overlaps at joints of

PVC sheet should be 200mm wide and pasted to each other with

bitumen about 1.7 kg./ sqm.)

(SOR SMC Pg No. 6 It No. 63)

DESCRIPTION Qty. UNIT AMOUNT

carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

specification using chlordene and chiorpurfiles 20 EC as per

15 6131_part II concentration weight one litter give 1% concentration 494.00 S.M.

inclusive of one litter chemicals emulsions application at the rate of

5 litter chemicals /sqmt of surface is recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

16 in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

(SOR SMC Pg No. 3 It No. 27) 82.00 S.M 272.48

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi,algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush, followed

17 by water jetting if required. Fill up all minor cracks and defects 82.00 S.M

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it

to dry for 4-5 hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

DESCRIPTION Qty. UNIT AMOUNT

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator, curing,

18 testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12587.74

First Floor 0.00 C.M. 12627.34

Second Floor 0.00 C.M. 12666.94

Terrace Floor 0.00 C.M. 12706.54

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 0.00 C.M. 11136.62

First Floor 0.00 C.M. 11176.22

Second Floor 0.00 C.M. 11215.82

Terrace Floor 0.00 C.M. 11255.42

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 21.00 C.M. 9190.79

First Floor 17.00 C.M. 9230.39

Second Floor 17.00 C.M. 9269.99

Terrace Floor 7.00 C.M. 9309.59

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 8994.86

First Floor 0.00 C.M. 9034.46

Second Floor 0.00 C.M. 9074.06

Terrace Floor 0.00 C.M. 9113.66

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 0.00 C.M. 8075.85

First Floor 0.00 C.M. 8115.45

Second Floor 0.00 C.M. 8155.05

Terrace Floor 0.00 C.M. 8194.65

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 44.00 C.M. 6999.09

First Floor 44.00 C.M. 7038.69

Second Floor 44.00 C.M. 7078.29

Terrace Floor 5.00 C.M. 7117.89

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7887.74

First Floor 0.00 C.M. 7927.34

Second Floor 0.00 C.M. 7966.94

Terrace Floor 0.00 C.M. 8006.54

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7306.10

First Floor 0.00 C.M. 7345.70

Second Floor 0.00 C.M. 7385.30

Terrace Floor 0.00 C.M. 7424.90

(3) Having more than 13 cm. Thickness

Ground Floor 55.00 C.M. 6727.93

First Floor 55.00 C.M. 6767.53

Second Floor 58.00 C.M. 6807.13

Terrace Floor 14.00 C.M. 6846.73

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 3.00 C.M. 9419.25

First Floor 3.00 C.M. 9458.85

DESCRIPTION Qty. UNIT AMOUNT

Second Floor 2.30 C.M. 9498.45

Terrace Floor 0.30 C.M. 9538.05

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 9.00 C.M. 6913.25

First Floor 9.00 C.M. 6952.85

Second Floor 9.00 C.M. 6992.45

Terrace Floor 1.00 C.M. 7032.05

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed

19 stone agg. 20 m.m Nominal size)& curing comp. incl. cost of from

work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 17.40 C.M. 3982.62

Providing, mixing, placing, compacting by machine vibrator, curing,

20 testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(A) Stair cases including landing etc.

Ground Floor 10.00 C.M. 7158.83

First Floor 10.00 C.M. 7198.43

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9030.72

First Floor 0.00 C.M. 9070.32

Terrace Floor 0.00 C.M. 9109.92

(SOR SMC - MIX DESIGN PG. NO-14)

(C) RCC Wall - 200 mm thick

Ground Floor 5.00 C.M. 7946.64

First Floor 5.00 C.M. 7986.24

Terrace Floor 5.00 C.M. 8025.84

(SOR SMC - MIX DESIGN PG. NO-14)

21 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.---

Ground Floor 21114.00 Kg 76.21

First Floor 20739.00 Kg 77.21

Terrace Floor 20945.00 Kg 78.21

Stair Cabin Top 4490.00 Kg 79.21

(SOR SMC Pg No. 2 It No. 15)

DESCRIPTION Qty. UNIT AMOUNT

Designing, providing and executing Bonded/ Unbonded Post-

tensioning works for slabs/beams/drop panels, etc. Including

decoiling the strands, cutting to the required lengths, supplying and

laying of sheathing (GI corrugated ducts), jointing with couplers

and inserting the strands, profiling, fixing live anchorages suitable

for tendons, grout vents, making dead end anchorages including

lowering the strands, fixing tendon support bars, supervising the

fixing of anti-bursting reinforcement, stressing the cables, end

trimming, grouting the cables with cement and admixtures, with

required plants and machinery tools and tackles, consumables etc.

including co-ordinating with Architectural/Structural consultants

drawings and obtaining approval from client/consultant/Project

Manager for the work done as per the requirement of

Architect/Structural Consultant at site. Also include Area marking

for Post tensioned elements. Area for the same shall be measured

within peripheral RCC beams/walls (Walls/beams not included)

or boundary of the slab etc. including all requisite as per Structural

Engineer instructions.Including all PT memberes (slab & beam)

stagging, shuttering and reproping shall be carried out as per

structural engineer's instruction and suggestion.

(1) All Post Tensioned Beams Detail Shall Only Be Provided After

Finalization Of Pt Vender By Contractor. (2) Rates Of PT beams

Includes All Ancillary Work/Facility/Item To Be Carried Out By

Contractor For Successful Execution Of PT Work. (3) All Required

Reproping For Long Span Beams/Slabs Or Other Critical Elements

Shall Be Carried Out By Contractor Without Any Extra Charge. (4)

Contractor Has To Kept Props For Rcc Elements As Per The

Instruction And Detail From Structural Consultant In Addition To

Standard Norms As Per Is : 456:2006 Without Any Extra Cost. (5) 0.00 RMT

Contractor Has To Make All Required And Necessary Provision To

Support Cantilever Slab/Beams Projections And Elements Which

Required Stagging/Shuttering/Formwork Supporting Height More

Than Normal Height Like Additional; Brackets , Ms Beams Etc.

Without Extra Cost

Brick work using common burnt clay building bricks having

23 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6

(1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 82.00 C.M. 4511.97

First Floor 84.00 C.M. 4786.95

Terrace Floor 84.00 C.M. 5061.92

Stair Cabin Top 44.00 C.M. 5379.24

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash

Ground Floor 722.00 S.M. 678.86

First Floor 722.00 S.M. 685.11

Second Floor 722.00 S.M. 691.37

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

25 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 1268.00 S.M 237.51

DESCRIPTION Qty. UNIT AMOUNT

First Floor 1271.00 S.M 265.65

Second Floor 1271.00 S.M 293.79

Terrace Floor 76.00 S.M 321.93

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

26 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 594.00 S.M 214.60

First Floor 594.00 S.M 242.74

Second Floor 594.00 S.M 270.88

Terrace Floor 29.00 S.M 270.88

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire

mesh (FRP / PVC) at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag

by cement mortar 1:3 before applying the plaster, including curing,

scaffolding all complete as directed.

Ground floor 95.00 S.M. 102.00

First floor 97.00 S.M. 102.00

Second Floor 97.00 S.M. 102.00

Terrace Floor 9.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Ground Floor 439.00 S.M 272.78

First Floor 439.00 S.M 272.78

Terrace Floor 439.00 S.M 272.78

Above SC Floor 202.00 S.M 272.78

(SOR SMC Pg No. 3 It No. 27)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

29 coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vertical ( two times ) up to good

quality and size of grain in elevation as per directed by engineer

Ground Floor 0.00 S.M 324.00

First Floor 0.00 S.M 324.00

Terrace Floor 0.00 S.M 324.00

LMR Floor 0.00 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

Providing throating or plaster drip and moulding it to R.C.C. chajja

30 etc.comp.. For all floor

Ground Floor 89.00 R.M 41.66

First Floor 89.00 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

Ground Floor 90.00 R.M 50.00

First Floor 90.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

DESCRIPTION Qty. UNIT AMOUNT

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

Ground Floor 442.00 S.M 1040.35

First Floor 442.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3

(1 cement : 3 coarse sand) and jointed with white cement slurry.

Ground Floor 164.00 S.M 1081.71

First Floor 164.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm (Average)

base of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new

34 surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with colour cement

slurry including finished with flush pointing & cleaning the surface

etc. comp.Size 24" x 24" For Antiskid tiles

Ground Floor 21.00 S.M 1397.83

First Floor 21.00 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

35 jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

Ground Floor 45.00 S.M 989.45

First Floor 0.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished Kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-cement : 3-coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Ground Floor 0.00 S.M 1076.94

First Floor 0.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone platform

0.6 mt. wide & 0.75 mt. height, including one end side granite stone

(Double Polish) of 1.25 mt. height & front granite stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm

th. plaster in 1:3 with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors. (Basic

rate of Granite Rs.1,200.00 / S.M.)

All Floor 11.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps etc.with

38 cinder or fly ash as directed by Engineer in charge etc. comp.For all

All Floor 36.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

DESCRIPTION Qty. UNIT AMOUNT

Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows &clearstory windows incl. Indian teak wood

39 frames of finished size 12cm x7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality & two

coats of oil painting etc. For all Floor (A) Fully Panelled

All Floor 30.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP frame size 125x65 mm and 35 mm

thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to filed up with

injected polyurethane foam done in situ along with embedded

40 wooden pieces for stiffening & also taking hinges & fintures. The 23.00 S.M

whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S. hinges with fastener sleeve & alluminium fixtures &

fasteningsFor all Floors.

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall

be pasted on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade &

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 28.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded aluminium colour

anodized section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.For all Floors.

(A) Same as above but colour anodized 10.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

DESCRIPTION Qty. UNIT AMOUNT

Providing and fixing window having extruded aluminium

POWEDER COATED section frame main outer size 95 mm x 24 mm

x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt),

horizontal Three track member size 92 mm x 31.75 mm x 1.30 mm

(of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of

size 92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size

43 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 0.00 S.M

kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon sealant glass

fixing to frame as per details etc.

(A) Same as above but colour anodized

All Floor 141.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17

Providing and fixing standared extruded ofalluminium section of

size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour

44 Powder Coated alluminium frame for ventilation with 5 mm thick 0.00 S.M

frosted glass as details etc complete for Ventilation

A) Same as above but Colour anodized 6.00 S.M 2414.00

SMC SOR Alluminium Work ITEM NO.4A,Pg No.17 MR

Providing & laying granite slab 18 mm thick in Window-Door

seal,Frames Etc laid on 10 mm thick cement mortar 1:4 (1

Cement: 4 Coarse sand) with necessary adhesive material and

finished with flush pointing in white or colour cement, including

rubbing & polishing comp. (Basic Rate: Rs. 1000.00/S.M.).For all

For all Floors. 269.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

46 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 3310.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing M.S.Grills of required pattern to wooden frames

of windows etc. At all floor levels with M.S. flats at required spacing

& frame around square or round bars with round headed bolts &

round headed bolts and nuts or by screws incl. Priming coat of Red

lead paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 3800.00 Kg. 104.20

SMC SOR, PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

48 shade including cleaning the surface of all dirt, dust and other

foreign matters. (A) For plain grill For all Floor

For all Floors 173.00 S.M 65.31

SMC SOR, colour works,item no.-8,Pg No.15

DESCRIPTION Qty. UNIT AMOUNT

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of required

size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, ITEM NO 120,Pg No.11, MR 675.00 Kg. 450.00

(1) The whole work is to be executed through specialized agency

50 with a guarantee of 10 (Ten) years given on a prescribed proforma

duly stamped (2) The rate shall include for work at all floors &

B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

operations. (a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.(b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm size

with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing compound

confirming to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried along

the vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata Incl.

curing etc. Comp. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and specified

by the engineer-in-charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement consumption

0.511 Bags / S.M.)

Terrace and staircabin top 607.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the

like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with

water proofing compound conforming to IS : 2645 in recommended

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of

the depression & about 18mm th' On the side walls of the

depression up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor level for a height

of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal

size spreading @0.008 C.M./S.M., thoroughly embedad in plaster

layer. as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

DESCRIPTION Qty. UNIT AMOUNT

For all Floors 87.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glased tiles of to be laid

over cementr morter 1:3 to plain or slope and to be tempered to

51 bring morter crème out up to surface using white cement including

grounding off jnctions and extending them up to 15 cm along the

wall, clearing with water and oxalic acid etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 607.00 S.M 747.29

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

52 including thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 3890.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 1838.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

53 even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

(A) for wall and similar surfaces

For all Floors 3890.00 S.M 79.39

(B) for ceilings and soffits

For all Floors 1838.00 S.M 79.39

SMC SOR , coiour works,Pg No.15,item no.-5

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi, algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush, followed

54 by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between

each coat of weather shield max paint.For all Floors.

For all Floors 1519.00 S.M 82.00

SMC SOR, coiour works,Pg No.16,item no.-17

Providing and applying textured plaster as per design of ICI Dulux

or of Asian paint as per manufacturers specification and directions

in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with

56 flush pointing in white or colour cement including rubbing and

polishing complete. (Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 108.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting, risers of

steps,dedo and pillars laid on 10mm thick cement mortar 1:4 (1

57 Cement : 4 Coarse sand) and finished with flush pointing in white

or colour cement including rubbing & polishing comp.. (Basic Rate:-

SMC SOR PAGE NO 4,IT NO 40 M.R. 29.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar

bent to shpe with hooked ends to RCC slabs curing, layig including

painting the exposed portion of loops, all as per standard design

For all Floors. 120.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of

59 (A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams,hip & trussed

purlins connected to common raffers & the like. For all Floor

For all Floors. 16.00 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

Providing & Fixing Polycarbonate sheet roofing with surface of

the sheet is coated with an anti-UV Co-extrusion layer having good

weather resistance, it can maintain its optical properties and

mechanical performance for a long time. Fasting is usually done by

screws. , The fastening screws should beinserted about 500 mm

apart and 300mm apart Along the supporting internal purlin and

60 edge pulin.All fixing holes with diameter at least 2 mm larger than

screw must be predrilled into each screw location. The screws

should be 6mm diameter with length according to sheet thickness

and corrosion resistant, with at least heavy duty hot dripped

galvanized or stainless steel. Excluding the cost of purlins rafter

(b) 2 mm thick Solid Sheet 9.00 S.M 1510.00

Extra for additional height of proping and centering where the

height of proping and centering exceed 4.0M between supprting

floor to ceilng including temporary brick or stone pillars for

suporting as required

1) height more than 4.0M and upto 5.0M 1721.00 S.M 390.34

2) height more than 5.0M and upto 6.0M 150.00 S.M 688.83

R&B SOR, Pg No.75 ,Item no.-09002AA/09002BA

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron diagonals

x5mm size with top & bottom rails of T-iron 40x40x6mm. with

38mm dia. steel pulleys comp. with bolts, locking arrangements,

stoppers, handles incl. applying a priming coat of Redlead paint

Ground Floor 52.00 S.M 5865.10

SMC SOR , PAGE NO 5, IT NO

DESCRIPTION Qty. UNIT AMOUNT

Masonary work using AAC Block Aerated light weight concrete

block having crushing strength not less than 35 kg/sqcm for super

63 structure above plinth level upto floor two level in cement

mortar 1:5 ( 1 cement : 5fine sand ) complete as per Technical

Ground Floor ( 1ST SLAB ) 0.00 C.M 4854.12

(LIBRARY & RECREATION CENTER AT P.T.P.S. NO.

(KATARGAM), F.P.NO 133, IT:31 SCDUAL B )

Providing & fixing at all floor levels,both face polished machine

cut edge Marble slab for Shelve joined with grey/White cement

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.) (Basic

Cost Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 19.00 S.M 1050.00

Providing, fixing, fitting S.S. Latter of quality SS 304 or with

colour powder coating incliuding Necessary fixture & Fastaning

with scaffolding etc. complete. As per requirement & Direction of

Engineer in Charge.

RATE as Per EZ_B bord and S.S logo Samati for TPS NO.22 , F.P.

NO.76 (SARTHANA) incd GTS ITEM

Providing, Approving designing and supplying 6mm thick white

Acrylic computer Laser cutting Latter including necessary

scaffolding, pasting on ACP sheet or similar surfaces, etc. complete.

RATE as Per EZ_B bord and S.S logo Samati for TPS NO.22 , F.P.

NO.76 (SARTHANA) incd GTS ITEM

67 Wall Vinyl Sticker 44.00 SQ. FT. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 147 (MR)

69 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 44.00 SQ. FT. 22.00

SMC SOR, PAGE NO.13,IT NO 148 (MR)

70 5mm PVC sheet Eco Vinyl (Any size) 44.00 SQ. FT. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

Decorative theme base designing & painting with all waterproof

SMC SOR, PAGE NO.13,IT NO 150 (MR)

DESCRIPTION Qty. UNIT AMOUNT

WATER SUPPLY & SANITATION

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at

all floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S"

72 trap for water closet squatting pan joining the trap with the pan &

soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous

china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

For all Floors. 1.00 Nos. 3275.00

SMC sor- Sanitary Items, Page no22, It No.

Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap with normal closing seat cover L bend

73 ncluding jointing the trap with soil pipe in cement mortar 1:1 (1

cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

C0278, HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ

For all Floors. 15.00 Nos 3282.00

SMC sor- Sanitary Items,Page no21,It No.

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587

,HindWare F160109

For all Floors. 15.00 Nos 971.00

SMC sor- Sanitary Items, Page no22, It No.

Providing Metropole Flush Valve Dual Flow 40mm

75 Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ

,HindWare F860075

For all Floors.

SMC sor- Sanitary Items, Page no22, It No.

Providing & fixing Wash Hung basin with single hole for pillar tap

, Size- 550 x 400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar

SLS- WHT -6801 ,HindWare10004

For all Floors. 10.00 Nos 2656.00

SMC sor- Sanitary Items, Page no21, It No.7

Providing & fixing 600 mm.x 450 mm. mirror of superior glass

at all floor levels, mounted on 6 mm. th. A.C. sheet or plywood

sheet & fixed to wooden plugs with C.P.brass screws and washers

etc. For all Floor

All Floor 10.00 Nos 833.73

SMC sor Page no7 , It No.72

Providing & fixing C.P. brass pillar cock with copper connection,

C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare

Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 10.00 Nos 1423.00

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK 30.00 NO

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp

DESCRIPTION Qty. UNIT AMOUNT

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

SMC sor Sanitary Items,Page no21, It No.

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101

Parry ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED

BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK

All floor 15.00 NO 2110.00

SMC sor Sanitary Items,Page no21, It No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

C.P. copper connecting pipe 450 mm long and nuts, washer and

82 brass flange complete, including cutting and making good the wall

where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

For all Floors. 10.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN

1121N ,HindWare F880007

For all Floors. 10.00 Nos 890.00

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing stainless steel recessed type Soap dish of

84 approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

For all Floors. 10.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

85 cleaning design with C.I. scread down or hinged grating including

the cost of cutting and making good the walls.

All floor 30.00 No. 558.36

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type"B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make

86 for soil and waste discharge system at all floor levels incl. All

fixtures like bends, tees,shoe etc. jointed with resin of approved

brand & manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type

"A") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for rain

87 water at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc. comp.

(M.R.) (A) 75 mm. Dia.

SMC sor ,Page no 8, It No. 85 M.R.

Providing and fixing in position P.V.C. cowl vent to pipes of prince,

suprime, jain Or Eqivalent make etc. comp (M.R).

DESCRIPTION Qty. UNIT AMOUNT

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1

89 cement :3 coarse sand]) finishing as per instruction given by Eng.

75mm PVC pipe 151.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC pipe

(SCH-40) line of prince/Supreme/Jain/Astral/ Tulsi/Finolex make

including fittings make or equivalent as approved by angineer-in-

charge. Pipe shall be fixed on the wall the help of clamp at every

two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on the

91 wall the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

SMC sor Page no8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor level,of

92 approved design to C.I. or S.C.I pipes including cost of cutting holes

and making good the wall etc. comp. (M.R)

SMC sor- Page no8, It No. 90 MR

Providing and fixing G.I. holder "Z" clamps at all floor level,of

93 approved pipes including cost of cutting holes and making good the

wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing and fixing gun metal check or non return full way wheel

valve at floor levels,etc. complete.

SMC sor Page no8,It No.

Providing and fixing abonite ball cock of approved quality as

directed etc. comp.

SMC sor- Page no 8,It No.

DESCRIPTION Qty. UNIT AMOUNT

Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in

cement mortar in proportion 1:1 of following nominal internal

diameters including testing of pipes and joints etc. complete.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Providing and fixing s.w. Gully trap with C.I. gratting brick

masonary chamber and water tight Pre cast R.C.C.cover of 300mm

X 300mm size (inside) including plastering smooth inside and

outside 15 mm thick in C.M 1:3 etc. comp.i) square mouth traps

(A)300 MM X 300 MM Size - P type.For all Floors.

SMC sor,Page no 7, It No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap chamber

with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster

15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top

98 slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 0.00 No.

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. for single

pipe.'.(A) Precast RCC heavy duty Cover instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 222.71

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

99 cement: 2 Sand : 4 Grade stone aggregate 20mm size), Foundation 0.00 No.

concrete 1: 5: 10 & fixing C.I. cover with frame to be not less than

38 kg. On top etc. comp. Inside dimension, 455 x 610 mm &450 mm

deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no7,It No.76

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size

having weight not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 12.00 NO 958.17

Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm

SMC sor- Page no6 It No. 64 15.00 NO 101.91

Providing & fixing white vitreous china urinal of size 450 x325mm

as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

102 spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange

complete including cutting and making good the walls and floors

wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-

WHT 13261H ,HindWare BACK SMALL 60001

SMC sor- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face polished machine cut

edge Marble slab for urinal partition joined with grey/White

cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)(

Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 13.00 S.M 1050.00

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved water

proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water proofing agent to

be mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top,

bottom slab & side pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm th' C.C

104 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside

R.C.C. pardi as per design, 10mm.th. water proofing cement plaster

in C.M. 1:3 with smooth finishing,watering etc.Comp.to all inner

face & bottom of tank curing etc. comp. incl. Locking arrangement,

outlet, inlet, overflow & wash out pipe arrangement as necessary &

C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed by Engineer-in-

Under Ground water Tank 10000.00 Lit 5.46

SMC sor - Page no6. It No.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell make at all floor levels, in flooring,

105 treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3

(1cement : 3 sand) finished with flush pointing in white cement

etc.com. For all floors

Under Ground water Tank 31.00 SM 857.42

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell make at all floor levels in skirting

risers of steps & dado on 10 mm. th. C.M.1:3 (1cement :3 sand)

including necessary cement paste for fixing and joined with white

cement slurry etc.complete. For all floors

Under Ground water Tank 86.00 SM 887.64

SMC SOR, Page no4, It No.

Providing & fixing IS Mark TMT FE 500D reinforcement for R.C.C.

107 work incl. bending, binding & placing in position etc. comp. Upto

Upto G.L./P.L. 1180.00 Kg. 76.21

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated Sintex/Super/Reno

PVC (ISI) mark water tank of required capacity each with all

necessary fittings & connection etc. complete on terrace.

SMC SOR- Page no 8, It No.

WORK UP TO PLINTH LEVEL

Excavation for foundation including sorting out and stacking off

useful materials and disposing of the excavated stuff up to 50 mt.

lead and all lift, watering etc.comp. (A) loose or soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 879.00 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

2 disposal of the surplus excavated soil as directed within a lead of

50 M. For following diameter of piles.

250mm dia 53.00 Rmt 326.84

SMC SOR , ITEM NO. 94, PG. NO.

Providing & Filling Rubbles including hand packing & filling

interstics with Quarry Spalls complete for all leads and lifts.

DESCRIPTION Qty. UNIT AMOUNT

SMC SOR , ITEM NO. 22, PG. NO. 3 82.00 C.M. 1064.80

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand : 6 Crushed

4 stone agg 20m.m Nominal size) &curing comp. excl. cost of form

work in :(a) foundation & Plinth

(A) Foundation 50.00 C.M. 3005.76

(C) Grade Slab 6.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

graded stone agg. 20 mm nominal size) & curing comp. Includ. cost

5 of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of columns and

(C) Grade slab 67.00 C.M. 3637.34

(SOR SMC Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete 98.00 C.M. 4180.62

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest

7 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12587.74

(2) Having cross sectional area more than 0.085 sq. mt .up to

(3) Having cross sectional area more than 0.12 sq. mt. 22.00 C.M. 9190.79

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 13.00 C.M. 8994.86

(2) Having cros sectional area more than 0.08 sq. mt and upto

(3) Having cross sectional area more than 0.12 sq. mt . 36.00 C.M. 6999.09

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness. 0.00 C.M. 7887.74

(2) Slabs having more than 10 Cm & upto 13 Cm

(3) Slabs having more than 13 Cm thickness. 4.00 C.M. 6727.93

(SOR SMC - MIX DESIGN PG. NO-14)

(E) RCC Wall - 200 mm Thick 13.00 C.M. 7946.64

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

8 R.C.C. work incl. bending, binding & placing in position etc.comp.---

Upto G.L./P.L. 24070.00 Kg. 76.21

(SOR SMC Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

(SOR SMC Pg No. 1 It No. 9) 118.00 C.M. 4237.00

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 1372.00 C.M. 130.39

DESCRIPTION Qty. UNIT AMOUNT

Filling in foundation and plinth with murrum or selected soil in

11 layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 461.00 C.M. 289.06

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

12 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Upto G.L./P.L. 56.00 S.M 237.51

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

13 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Upto G.L./P.L. 23.00 S.M 214.60

(SOR SMC Pg No. 3 It No. 24)

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

14 proforma duly stamped (2) The rate shall include for work at all 145.00 S.M

floors & conducting water proof test as directed. (M.R.)

Proiding & laying water proofing treatment to vertical and

horizontal surfaces like consisting of (a) I course of applying

cement slurry 4.4 kg per sq.mt. mixed with water proofing

compound confirming to IS:2645 in rcommended proportions. (b)

II corse of 20mm cement plaster 1:3 mixed with water proofing

compound in recommended proportion (c) III course of applying

blown or / resideal bitumen applied hot at 1.7 kg per sqm of area.

(d) IV course of 400mm micron th. PVC sheet. (Overlaps at joints of

PVC sheet should be 200mm wide and pasted to each other with

bitumen about 1.7 kg./ sqm.)

(SOR SMC Pg No. 6 It No. 63)

carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

specification using chlordene and chiorpurfiles 20 EC as per

15 6131_part II concentration weight one litter give 1% concentration 530.00 S.M.

inclusive of one litter chemicals emulsions application at the rate of

5 litter chemicals /sqmt of surface is recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

16 in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

(SOR SMC Pg No. 3 It No. 27) 318.00 S.M 272.48

DESCRIPTION Qty. UNIT AMOUNT

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi,algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush, followed

17 by water jetting if required. Fill up all minor cracks and defects 318.00 S.M

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it

to dry for 4-5 hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator, curing,

18 testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12587.74

Terrace Floor 0.00 C.M. 12627.34

SC Floor 0.00 C.M. 12666.94

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 0.00 C.M. 11136.62

Terrace Floor 0.00 C.M. 11176.22

SC Floor 0.00 C.M. 11215.82

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 21.00 C.M. 9190.79

Terrace Floor 10.00 C.M. 9230.39

SC Floor 0.50 C.M. 9269.99

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 13.00 C.M. 8994.86

Terrace Floor 0.00 C.M. 9034.46

SC Floor 0.00 C.M. 9074.06

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 0.00 C.M. 8075.85

Terrace Floor 0.00 C.M. 8115.45

SC Floor 0.00 C.M. 8155.05

Terrace Floor 0.00 C.M. 8194.65

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 35.00 C.M. 6999.09

Terrace Floor 6.00 C.M. 7038.69

SC Floor 0.00 C.M. 7078.29

(SOR SMC - MIX DESIGN PG. NO-14)

DESCRIPTION Qty. UNIT AMOUNT

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7887.74

Terrace Floor 0.00 C.M. 7927.34

SC Floor 0.00 C.M. 7966.94

Terrace Floor 0.00 C.M. 8006.54

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7306.10

Terrace Floor 0.00 C.M. 7345.70

SC Floor 0.00 C.M. 7385.30

(3) Having more than 13 cm. Thickness

Ground Floor 77.00 C.M. 6727.93

Terrace Floor 5.60 C.M. 6767.53

SC Floor 0.00 C.M. 6807.13

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 4.00 C.M. 9419.25

Terrace Floor 0.20 C.M. 9458.85

SC Floor 0.00 C.M. 9498.45

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 13.20 C.M. 6913.25

Terrace Floor 0.60 C.M. 6952.85

SC Floor 0.00 C.M. 6992.45

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed

19 stone agg. 20 m.m Nominal size)& curing comp. incl. cost of from

work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 3.70 C.M. 3982.62

Providing, mixing, placing, compacting by machine vibrator, curing,

20 testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(A) Stair cases including landing etc.

Ground Floor 4.00 C.M. 7158.83

Terrace Floor 0.00 C.M. 7198.43

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9030.72

Terrace Floor 0.00 C.M. 9070.32

(SOR SMC - MIX DESIGN PG. NO-14)

(C) RCC Wall - 200 mm thick

Ground Floor 0.00 C.M. 7946.64

Terrace Floor 0.00 C.M. 7986.24

(SOR SMC - MIX DESIGN PG. NO-14)

21 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.---

Ground Floor 20305.00 Kg 76.21

Terrace Floor 4979.00 Kg 77.21

SC Floor 150.00 Kg 78.21

(SOR SMC Pg No. 2 It No. 15)

DESCRIPTION Qty. UNIT AMOUNT

Designing, providing and executing Bonded/ Unbonded Post-

tensioning works for slabs/beams/drop panels, etc. Including

decoiling the strands, cutting to the required lengths, supplying and

laying of sheathing (GI corrugated ducts), jointing with couplers

and inserting the strands, profiling, fixing live anchorages suitable

for tendons, grout vents, making dead end anchorages including

lowering the strands, fixing tendon support bars, supervising the

fixing of anti-bursting reinforcement, stressing the cables, end

trimming, grouting the cables with cement and admixtures, with

required plants and machinery tools and tackles, consumables etc.

including co-ordinating with Architectural/Structural consultants

drawings and obtaining approval from client/consultant/Project

Manager for the work done as per the requirement of

Architect/Structural Consultant at site. Also include Area marking

for Post tensioned elements. Area for the same shall be measured

within peripheral RCC beams/walls (Walls/beams not included)

or boundary of the slab etc. including all requisite as per Structural

Engineer instructions.Including all PT memberes (slab & beam)

stagging, shuttering and reproping shall be carried out as per

structural engineer's instruction and suggestion.

(1) All Post Tensioned Beams Detail Shall Only Be Provided After

Finalization Of Pt Vender By Contractor. (2) Rates Of PT beams

Includes All Ancillary Work/Facility/Item To Be Carried Out By

Contractor For Successful Execution Of PT Work. (3) All Required

Reproping For Long Span Beams/Slabs Or Other Critical Elements

Shall Be Carried Out By Contractor Without Any Extra Charge. (4)

Contractor Has To Kept Props For Rcc Elements As Per The

Instruction And Detail From Structural Consultant In Addition To

Standard Norms As Per Is : 456:2006 Without Any Extra Cost. (5) 0.00 RMT

Contractor Has To Make All Required And Necessary Provision To

Support Cantilever Slab/Beams Projections And Elements Which

Required Stagging/Shuttering/Formwork Supporting Height More

Than Normal Height Like Additional; Brackets , Ms Beams Etc.

Without Extra Cost

Brick work using common burnt clay building bricks having

23 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6

(1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 151.00 C.M. 4511.97

Terrace Floor 43.00 C.M. 4786.95

SC Floor 6.00 C.M. 5061.92

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash

Ground Floor 317.00 S.M. 678.86

Terrace Floor 58.00 S.M. 685.11

SC Floor 0.00 S.M. 691.37

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

25 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 1546.00 S.M 237.51

Terrace Floor 102.00 S.M 265.65

DESCRIPTION Qty. UNIT AMOUNT

SC Floor 0.00 S.M 293.79

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

26 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 606.00 S.M 214.60

Terrace Floor 44.00 S.M 242.74

SC Floor 0.00 S.M 270.88

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire

mesh (FRP / PVC) at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag

by cement mortar 1:3 before applying the plaster, including curing,

scaffolding all complete as directed.

Ground Floor 108.00 S.M. 102.00

Terrace Floor 8.00 S.M. 102.00

SC Floor 0.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Ground Floor 550.00 S.M 272.78

Terrace Floor 396.00 S.M 272.78

SC Floor 13.00 S.M 272.78

(SOR SMC Pg No. 3 It No. 27)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

29 coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vertical ( two times ) up to good

quality and size of grain in elevation as per directed by engineer

Ground Floor 0.00 S.M 324.00

Terrace Floor 0.00 S.M 324.00

SC Floor 0.00 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

Providing throating or plaster drip and moulding it to R.C.C. chajja

30 etc.comp.. For all floor

Ground Floor 109.00 R.M 41.66

Terrace Floor 4.40 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

Ground Floor 109.00 R.M 50.00

Terrace Floor 5.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

Ground Floor 432.00 S.M 1040.35

Terrace Floor 20.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

DESCRIPTION Qty. UNIT AMOUNT

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3

(1 cement : 3 coarse sand) and jointed with white cement slurry.

Ground Floor 259.00 S.M 1081.71

First Floor 0.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm (Average)

base of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new

34 surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with colour cement

slurry including finished with flush pointing & cleaning the surface

etc. comp.Size 24" x 24" For Antiskid tiles

Ground Floor 38.00 S.M 1397.83

Terrace Floor 0.00 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

35 jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

Ground Floor 0.00 S.M 989.45

Terrace Floor 0.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished Kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-cement : 3-coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Ground Floor 0.00 S.M 1076.94

Terrace Floor 0.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

Supplying Fixing High Performance Sports Multipurpose Flooring

of thickness from 4 MM up to 10 MM having UV coating, durable

wear layer, Reinforced fibreglass layer, Closed cell foam backing.

Floor which Absorbs impacts from jumps and protects the joints

and muscles involved making more exercise a more comfortable

with enjoyment, having excellent power return enables patients to

increase their performance maintaining super vertical stability.

Low indentation properties you can put heavy things on it without

indentation, Environmental friendly, non-toxic, Recycled,

non-pollution, Moderate and adjusted hardness, Excellent

37 resilience, wear well, Soft, anti-slip, anti-fatigue, Convenient

installation and easy maintenance made of 85% black rubber

granules and 15% synthetic EPDM granules Density (kg/m3):

1000/1200, Hardness (Shore a):68,Stretch (MPA) :2.2, Abrasion

resistance: 0.0075g (ASTM - D4060 - 01), Rebound resistance:

55%,Friction coefficient: trends μs: 0.995, trends μk: 0.930, Shape

deformation: 42%

Ground Floor 169.00 S.M 1345.00

SMC APPROVED RATE (FIRE STATION FP-26, TP-91 SOUTH

DESCRIPTION Qty. UNIT AMOUNT

Providing and constructing sandwitch type Granite stone platform

0.6 mt. wide & 0.75 mt. height, including one end side granite stone

(Double Polish) of 1.25 mt. height & front granite stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm

th. plaster in 1:3 with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors. (Basic

rate of Granite Rs.1,200.00 / S.M.)

All Floor 3.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps etc.with

39 cinder or fly ash as directed by Engineer in charge etc. comp.For all

All Floor 43.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows &clearstory windows incl. Indian teak wood

40 frames of finished size 12cm x7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality & two

coats of oil painting etc. For all Floor (A) Fully Panelled

All Floor 24.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP frame size 125x65 mm and 35 mm

thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to filed up with

injected polyurethane foam done in situ along with embedded

41 wooden pieces for stiffening & also taking hinges & fintures. The 21.00 S.M

whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S. hinges with fastener sleeve & alluminium fixtures &

fasteningsFor all Floors.

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall

be pasted on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade &

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 17.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

DESCRIPTION Qty. UNIT AMOUNT

Providing and fixing window having extruded aluminium colour

anodized section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.For all Floors.

(A) Same as above but colour anodized 6.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

Providing and fixing window having extruded aluminium

POWEDER COATED section frame main outer size 95 mm x 24 mm

x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt),

horizontal Three track member size 92 mm x 31.75 mm x 1.30 mm

(of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of

size 92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size

44 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 0.00 S.M

kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon sealant glass

fixing to frame as per details etc.

(A) Same as above but colour anodized

All Floor 72.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17

Providing and fixing standared extruded ofalluminium section of

size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour

45 Powder Coated alluminium frame for ventilation with 5 mm thick 0.00 S.M

frosted glass as details etc complete for Ventilation

A) Same as above but Colour anodized 3.00 S.M 2414.00

SMC SOR Alluminium Work ITEM NO.4A,Pg No.17 MR

Providing & laying granite slab 18 mm thick in Window-Door

seal,Frames Etc laid on 10 mm thick cement mortar 1:4 (1

Cement: 4 Coarse sand) with necessary adhesive material and

finished with flush pointing in white or colour cement, including

rubbing & polishing comp. (Basic Rate: Rs. 1000.00/S.M.).For all

For all Floors. 156.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

47 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 2018.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing M.S.Grills of required pattern to wooden frames

of windows etc. At all floor levels with M.S. flats at required spacing

& frame around square or round bars with round headed bolts &

round headed bolts and nuts or by screws incl. Priming coat of Red

lead paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

DESCRIPTION Qty. UNIT AMOUNT

For all Floors. 1998.00 Kg. 104.20

SMC SOR, PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

49 shade including cleaning the surface of all dirt, dust and other

foreign matters. (A) For plain grill For all Floor

For all Floors 97.00 S.M 65.31

SMC SOR, colour works,item no.-8,Pg No.15

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of required

size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, ITEM NO 120,Pg No.11, MR 208.00 Kg. 450.00

(1) The whole work is to be executed through specialized agency

51 with a guarantee of 10 (Ten) years given on a prescribed proforma

duly stamped (2) The rate shall include for work at all floors &

B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

operations. (a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.(b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm size

with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing compound

confirming to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried along

the vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata Incl.

curing etc. Comp. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and specified

by the engineer-in-charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement consumption

0.511 Bags / S.M.)

Terrace and staircabin top 685.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

DESCRIPTION Qty. UNIT AMOUNT

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the

like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with

water proofing compound conforming to IS : 2645 in recommended

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of

the depression & about 18mm th' On the side walls of the

depression up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor level for a height

of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal

size spreading @0.008 C.M./S.M., thoroughly embedad in plaster

layer. as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

For all Floors 0.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glased tiles of to be laid

over cementr morter 1:3 to plain or slope and to be tempered to

52 bring morter crème out up to surface using white cement including

grounding off jnctions and extending them up to 15 cm along the

wall, clearing with water and oxalic acid etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 685.00 S.M 747.29

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

53 including thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 1648.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 673.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

54 even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

(A) for wall and similar surfaces

For all Floors 1648.00 S.M 79.39

(B) for ceilings and soffits

For all Floors 673.00 S.M 79.39

SMC SOR , coiour works,Pg No.15,item no.-5

DESCRIPTION Qty. UNIT AMOUNT

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi, algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush, followed

55 by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between

each coat of weather shield max paint.For all Floors.

For all Floors 959.00 S.M 82.00

SMC SOR, coiour works,Pg No.16,item no.-17

Providing and applying textured plaster as per design of ICI Dulux

or of Asian paint as per manufacturers specification and directions

in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with

57 flush pointing in white or colour cement including rubbing and

polishing complete. (Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 30.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting, risers of

steps,dedo and pillars laid on 10mm thick cement mortar 1:4 (1

58 Cement : 4 Coarse sand) and finished with flush pointing in white

or colour cement including rubbing & polishing comp.. (Basic Rate:-

SMC SOR PAGE NO 4,IT NO 40 M.R. 22.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar

bent to shpe with hooked ends to RCC slabs curing, layig including

painting the exposed portion of loops, all as per standard design

For all Floors. 15.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of

60 (A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams,hip & trussed

purlins connected to common raffers & the like. For all Floor

For all Floors. 36.63 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

DESCRIPTION Qty. UNIT AMOUNT

Providing & Fixing Polycarbonate sheet roofing with surface of

the sheet is coated with an anti-UV Co-extrusion layer having good

weather resistance, it can maintain its optical properties and

mechanical performance for a long time. Fasting is usually done by

screws. , The fastening screws should beinserted about 500 mm

apart and 300mm apart Along the supporting internal purlin and

61 edge pulin.All fixing holes with diameter at least 2 mm larger than

screw must be predrilled into each screw location. The screws

should be 6mm diameter with length according to sheet thickness

and corrosion resistant, with at least heavy duty hot dripped

galvanized or stainless steel. Excluding the cost of purlins rafter

(b) 2 mm thick Solid Sheet 99.00 S.M 1510.00

Extra for additional height of proping and centering where the

height of proping and centering exceed 4.0M between supprting

floor to ceilng including temporary brick or stone pillars for

suporting as required

1) height more than 4.0M and upto 5.0M 0.00 S.M 390.34

2) height more than 5.0M and upto 6.0M 0.00 S.M 688.83

R&B SOR, Pg No.75 ,Item no.-09002AA/09002BA

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron diagonals

x5mm size with top & bottom rails of T-iron 40x40x6mm. with

38mm dia. steel pulleys comp. with bolts, locking arrangements,

stoppers, handles incl. applying a priming coat of Redlead paint

Ground Floor 17.00 S.M 5865.10

SMC SOR , PAGE NO 5, IT NO

Masonary work using AAC Block Aerated light weight concrete

block having crushing strength not less than 35 kg/sqcm for super

64 structure above plinth level upto floor two level in cement

mortar 1:5 ( 1 cement : 5fine sand ) complete as per Technical

Ground Floor ( 1ST SLAB ) 0.00 C.M 4854.12

(LIBRARY & RECREATION CENTER AT P.T.P.S. NO.

(KATARGAM), F.P.NO 133, IT:31 SCDUAL B )

Providing & fixing at all floor levels,both face polished machine

cut edge Marble slab for Shelve joined with grey/White cement

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.) (Basic

Cost Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 15.00 S.M 1050.00

Providing, fixing, fitting S.S. Latter of quality SS 304 or with

colour powder coating incliuding Necessary fixture & Fastaning

66 300.00 R.inch

with scaffolding etc. complete. As per requirement & Direction of

Engineer in Charge.

RATE as Per EZ_B bord and S.S logo Samati for TPS NO.22 , F.P.

NO.76 (SARTHANA) incd GTS ITEM

Providing, Approving designing and supplying 6mm thick white

Acrylic computer Laser cutting Latter including necessary

67 300.00 R.inch

scaffolding, pasting on ACP sheet or similar surfaces, etc. complete.

RATE as Per EZ_B bord and S.S logo Samati for TPS NO.22 , F.P.

NO.76 (SARTHANA) incd GTS ITEM

68 Wall Vinyl Sticker 44.00 SQ. FT. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 147 (MR)

70 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 44.00 SQ. FT. 22.00

SMC SOR, PAGE NO.13,IT NO 148 (MR)

71 5mm PVC sheet Eco Vinyl (Any size) 44.00 SQ. FT. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

DESCRIPTION Qty. UNIT AMOUNT

Decorative theme base designing & painting with all waterproof

SMC SOR, PAGE NO.13,IT NO 150 (MR)

WATER SUPPLY & SANITATION

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at

all floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S"

73 trap for water closet squatting pan joining the trap with the pan &

soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous

china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

For all Floors. 1.00 Nos. 3275.00

SMC sor- Sanitary Items, Page no22, It No.

Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap with normal closing seat cover L bend

74 ncluding jointing the trap with soil pipe in cement mortar 1:1 (1

cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

C0278, HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ

For all Floors. 7.00 Nos 3282.00

SMC sor- Sanitary Items,Page no21,It No.

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587

,HindWare F160109

For all Floors. 7.00 Nos 971.00

SMC sor- Sanitary Items, Page no22, It No.

Providing Metropole Flush Valve Dual Flow 40mm

76 Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ

,HindWare F860075

For all Floors.

SMC sor- Sanitary Items, Page no22, It No.

Providing & fixing Wash Hung basin with single hole for pillar tap

, Size- 550 x 400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar

SLS- WHT -6801 ,HindWare10004

For all Floors. 5.00 Nos 2656.00

SMC sor- Sanitary Items, Page no21, It No.7

Providing & fixing 600 mm.x 450 mm. mirror of superior glass

at all floor levels, mounted on 6 mm. th. A.C. sheet or plywood

sheet & fixed to wooden plugs with C.P.brass screws and washers

etc. For all Floor

All Floor 5.00 Nos 833.73

SMC sor Page no7 , It No.72

Providing & fixing C.P. brass pillar cock with copper connection,

C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare

Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 5.00 Nos 1423.00

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK 24.00 NO

DESCRIPTION Qty. UNIT AMOUNT

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

SMC sor Sanitary Items,Page no21, It No.

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101

Parry ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED

BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK

All floor 7.00 NO 2110.00

SMC sor Sanitary Items,Page no21, It No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

C.P. copper connecting pipe 450 mm long and nuts, washer and

83 brass flange complete, including cutting and making good the wall

where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

For all Floors. 5.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN

1121N ,HindWare F880007

For all Floors. 5.00 Nos 890.00

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing stainless steel recessed type Soap dish of

85 approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

For all Floors. 5.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

86 cleaning design with C.I. scread down or hinged grating including

the cost of cutting and making good the walls.

All floor 15.00 No. 558.36

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type"B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make

87 for soil and waste discharge system at all floor levels incl. All

fixtures like bends, tees,shoe etc. jointed with resin of approved

brand & manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type

"A") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for rain

88 water at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc. comp.

(M.R.) (A) 75 mm. Dia.

DESCRIPTION Qty. UNIT AMOUNT

SMC sor ,Page no 8, It No. 85 M.R.

Providing and fixing in position P.V.C. cowl vent to pipes of prince,

suprime, jain Or Eqivalent make etc. comp (M.R).

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1

90 cement :3 coarse sand]) finishing as per instruction given by Eng.

75mm PVC pipe 60.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC pipe

(SCH-40) line of prince/Supreme/Jain/Astral/ Tulsi/Finolex make

including fittings make or equivalent as approved by angineer-in-

charge. Pipe shall be fixed on the wall the help of clamp at every

two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on the

92 wall the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

SMC sor Page no8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor level,of

93 approved design to C.I. or S.C.I pipes including cost of cutting holes

and making good the wall etc. comp. (M.R)

SMC sor- Page no8, It No. 90 MR

Providing and fixing G.I. holder "Z" clamps at all floor level,of

94 approved pipes including cost of cutting holes and making good the

wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing and fixing gun metal check or non return full way wheel

valve at floor levels,etc. complete.

SMC sor Page no8,It No.

Providing and fixing abonite ball cock of approved quality as

directed etc. comp.

SMC sor- Page no 8,It No.

DESCRIPTION Qty. UNIT AMOUNT

Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in

cement mortar in proportion 1:1 of following nominal internal

diameters including testing of pipes and joints etc. complete.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Providing and fixing s.w. Gully trap with C.I. gratting brick

masonary chamber and water tight Pre cast R.C.C.cover of 300mm

X 300mm size (inside) including plastering smooth inside and

outside 15 mm thick in C.M 1:3 etc. comp.i) square mouth traps

(A)300 MM X 300 MM Size - P type.For all Floors.

SMC sor,Page no 7, It No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap chamber

with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster

15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top

99 slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 0.00 No.

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. for single

pipe.'.(A) Precast RCC heavy duty Cover instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 222.71

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

100 cement: 2 Sand : 4 Grade stone aggregate 20mm size), Foundation 0.00 No.

concrete 1: 5: 10 & fixing C.I. cover with frame to be not less than

38 kg. On top etc. comp. Inside dimension, 455 x 610 mm &450 mm

deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no7,It No.76

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size

having weight not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 10.00 NO 958.17

Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm

SMC sor- Page no6 It No. 64 15.00 NO 101.91

Providing & fixing white vitreous china urinal of size 450 x325mm

as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

103 spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange

complete including cutting and making good the walls and floors

wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-

WHT 13261H ,HindWare BACK SMALL 60001

SMC sor- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face polished machine cut

edge Marble slab for urinal partition joined with grey/White

cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)(

Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 4.00 S.M 1050.00

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved water

proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water proofing agent to

be mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top,

bottom slab & side pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm th' C.C

105 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside

R.C.C. pardi as per design, 10mm.th. water proofing cement plaster

in C.M. 1:3 with smooth finishing,watering etc.Comp.to all inner

face & bottom of tank curing etc. comp. incl. Locking arrangement,

outlet, inlet, overflow & wash out pipe arrangement as necessary &

C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed by Engineer-in-

Under Ground water Tank 10000.00 Lit 5.46

SMC sor - Page no6. It No.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell make at all floor levels, in flooring,

106 treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3

(1cement : 3 sand) finished with flush pointing in white cement

etc.com. For all floors

Under Ground water Tank 31.00 SM 857.42

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell make at all floor levels in skirting

risers of steps & dado on 10 mm. th. C.M.1:3 (1cement :3 sand)

including necessary cement paste for fixing and joined with white

cement slurry etc.complete. For all floors

Under Ground water Tank 86.00 SM 887.64

SMC SOR, Page no4, It No.

Providing & fixing IS Mark TMT FE 500D reinforcement for R.C.C.

108 work incl. bending, binding & placing in position etc. comp. Upto

Upto G.L./P.L. 1180.00 Kg. 76.21

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated Sintex/Super/Reno

PVC (ISI) mark water tank of required capacity each with all

necessary fittings & connection etc. complete on terrace.

SMC SOR- Page no 8, It No.

(A) PAVER BLOCK & VDS ROAD

Box Cutting the road surface to proper slope and camber for

making base includinng removing the excavated stuff and

depositing on the road side slope as directed up to 50 mt. lead.

SMC SOR-PAGE NO 20 IT NO GD.1

Preparation of subgrade with compacting, Leveling and

consolidation of subgrade with miniroller/plate vibrator machine

including watering and filling in depression occur the process as

directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.2

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying Granular Sub Base(GSB) confirming to Grading

V of Table 400.0 of compacted th. Of 150 mm with specified graded

stone metal and sand mixed in place and laid with mechanical

means spreading with motor grader and compactiong with

vibratory roller having miimum 80-100 KN static weight to achieve

desired dencity of 98 % of MDD including all material, labour,

machinery with all leads and lifts etc. comp.

SMC SOR-PAGE NO 20 IT NO GD.9

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

4 Crushed stone agg 20m.m Nominal size) &curing comp. excl. cost 119.00 C.M.

of form work in :(a) foundation & Plinth

SMC SOR-PAGE NO 1 IT NO

providing and laying 200 micron plastic sheet on prepared sub

5 base as per instruction of Engg. In charge etc. complete. 633.00 S.M.

SMC SOR-PAGE NO 20 IT NO GD.12 MR

Supplying & filling fine sand (pana) in 75 mm /100 mm /

150mm compacted thickness over the base including necessary

6 compaction, watering etc. compacted. Item includes levelling by 104.00 C.M.

using vibratory plates compacted machine and as directed by

engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.4

Providing 100mm th. Ready made C.C. kerb of strength M-20 (Size

300mm X 380mm) purchased from SMC's approved paverblock

manufacturer & setting in line level and in truly vertical postion,

including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone

dust ) smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of

coarse sand) including watering etc. complete and as directed by

engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.6 MR

Providing interlocking type Rubber moulding cement concrete

Paver Block of approved shape, design & colour having 60 mm

thickness (M-35) Purchased from S.M.C's approved paverblock

manufactures only & fixing on fine sand bedding. Item includes

leveling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. Complete

With colour 380.00 S.M. 524.00

Without colour 380.00 S.M. 524.00

SMC SOR-PAGE NO 20 IT NO GD.7 MR

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

watering, ramming & consolidation etc. complete.

SMC SOR-PAGE NO 20 IT NO GD.3

Providing & filling in plinth with murrum or selected soil in layers

10 of 20 cm. Th'. Incl. watering, ramming & consolidation etc. 2024.00 C.M.

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete Pavement using 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a

skim powder floater, curing etc. complete.

Internal road 79.00 C.M. 5981.00

SMC SOR-PAGE NO 20 IT NO GD.10

Cutting of Groove 5.00 to 7.00 mm th. In VDS for depth of 1/3 of

12 total thickness with filling of epoxy sealent as directed by engineer 350.00 R.MT

SMC SOR-PAGE NO 20 IT NO GD.13

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

13 R.C.C. work incl. bending, binding & placing in position etc. comp.

DESCRIPTION Qty. UNIT AMOUNT

Upto G.L./P.L. 3160.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

(B) COMPOUND WALL & MAIN GATE

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

50 M. For following diameter of piles.

for 250 mm dia 282.00 R.M 326.84

for 300 mm dia 69.00 R.M 391.74

SMC SOR-PAGE NO 9 IT NO

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

( 1 ) up to 1.5 mt. Depth 42.00 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse

3 sand:8 gradedstone agg. 40 mm nominal size) & curing comp.

excl.cost of form work in

(A) Foundation and plinth 9.00 C.M. 2680.21

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

of form work but exclu. Cost of reinforcement for reinforced

concrete work in

(A) foundation, footing, base of columns and mass concrete

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incld. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 26.00 C.M. 9102.61

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

upto G.L./P.L. 0.00 C.M. 8174.41

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incld. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in

(1) Having c/s area up to 0.08 sq.mt. 0.00 C.M. 12632.60

SMC SOR-PAGE NO 1 IT NO

Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone agg.

7 mm nominal size) & curing complete including cost of formwork in 11.00 C.M.

wall caps & copping.

SMC SOR-PAGE NO 9 IT NO

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

8 depth consolidating each disposited layer by ramming and 43.00 C.M.

SMC SOR-PAGE NO 1 IT NO

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

R.C.C. workincl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 6630.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incld. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 s.mt 20.00 C.M 12632.60

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(1)Having c/s area up to 0.08 s.mt 0.00 C.M 9102.61

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

SMC SOR-PAGE NO 1 IT NO

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

R.C.C. workincl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 4200.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

Brick work using common burnt clay building bricks having

crushing strengthnot less than 35 kg./Sq.Cm. in Cement Mortar 1:6

(1- Cement : 6 -fine sand)(C) Fly Ash Bricks

At ground floor 158.00 C.M. 4511.97

SMC SOR-PAGE NO 2 IT NO

Half brick masonry in common brunt clay building bricks having

crushingstrength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

13 (1- Cement : 4 -coarse sand ) in foundation and plinth (C)Fly Ash

At ground floor 0.00 S.M. 625.53

SMC SOR-PAGE NO 2 IT NO

Providing & Applying 10mm.th.cement plaster in single coat on

brick/concrete walls similar surfaces for plastering & finished even

14 & smooth with afloating coat of cement slurry mixed with

admixture of lime or neeru inrequired proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

At Ground Floor 0.00 S.M. 189.79

(B) For ceilings & soffits

At Ground Floor 0.00 S.M. 214.60

SMC SOR-PAGE NO 3 IT NO

20mm thick sand faced cement plaster on walls for height more

than 10 metres above ground level consisting of 12mm thick

15 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

At Ground Floor 1462.00 S.M. 330.88

SMC SOR-PAGE NO 3 IT NO

Providing throating or plaster drip and moulding it to R.C.C.

chajja etc. comp.. For all floor

At Ground Floor 0.00 R.M. 41.66

SMC SOR-PAGE NO 3 IT NO

17 Pro. smooth plaster patta

At Ground Floor 1006.00 R.M. 27.27

Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

At Ground Floor 465.00 R.M. 50.00

SMC SOR-PAGE NO 3 IT NO

DESCRIPTION Qty. UNIT AMOUNT

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi, algae and flaking paint. This

19 can be achieved by brushing with a wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for

4-5 hours. Application of putty is not recommended. Minimum 4-6

hours duration is required between each coat of weather shield

(A) For wall 1469.00 S.M 82.00

SMC SOR- COLOUR WORK PAGE NO 16 IT NO

M.S. Gate Steel work welded in built up sections,frame work

20 including cutting, hoisting, fixing in position and applying apriming

coat of red lead paint :-

(A) In beams and joists channels angles, tees, flats with connection

plats or angle cleats as in main and cross beams, hip and trussed

purlins connected to common raffers and the like.

Ground Floor 8.50 Qtl 9047.86

SMC SOR-PAGE NO 9 IT NO 98(A)

Providing & fixing M.S. Grills of required pattern to wooden

frames of windows etc. at all floor levels with M.S. flats at required

spacing & frame around square or round bars with round headed

bolts & round headed bolts and nuts or by screws incl. Priming coat

of Red lead paint etc. comp. (A) Plain Grill For all floors

All Floor 1264.00 KG. 104.20

SMC SOR-PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to give

22 an even shade including cleaning the surface of all dirt, dust and

other foreign matters.

Ground Floor 116.00 S.M. 65.31

SMC SOR- COLOUR WORK PAGE NO 15 IT NO

Providing and fixing hot dip Concertina Coil of 610mm dia made

out of 2.59mm (12SWG) hot dip galvanized (G.I coating not less

than 200 gm/sq.m)th. Wire having 80 nos. of spies and 200 nos. of

clips made out of stainless steel (AISI 304) 1.5 mm th. Dia, G.I.

23 Strips 0.5 mm ht. (G.I coating not less than 120 gm/sq.m ) weight of 2090.00 RMT

one coil should not be less than 15 kg etc. complete, at the top of

compound wall fixed with S.S clips and binding wires wherever

necessary etc. complete. (Note : Stretching lenght of one coil should

not be more than 9 mt.) As per Engg. In charg direction.

SMC APPROVED RATE

DESCRIPTION Qty. UNIT AMOUNT

Providing, supplying and fixing of MS angles 50X50X5 mm over

existing compound wall (for laying Concertina coil & barbed wire

fencing) as per approved design "Y" shape, drawing including

fabrication, cutting, welding, to required pattern, making holes, etc.

complete with one coat primer and two coats of synthetic enamel

paints of approved manufacture, colour, brand and shade, cost of

materials, fixtures, necessary accessories scaffolding, tools n

tackles, labours, transportation at all heights and levels as directed

24 by engineer incharge. Note 1) dismantling of existing compound 6.38 Kg.

wall of BBM/SSM for fixing of MS angles. 2) providing and laying of

M-15 grade concrete (size of concrete required up to

300x300x300mm minimum) for fixing og MS angles. (price to be

quoted inclusive of concrete works incluidng shuttering supports

and chipping along with MS angles works and carting away the

(SOR SMC It No. 98A)

(C) WATER SUPPLY & SANITARY

Providing and constructing simple chamber of 23cm. of B.B.

masonary wall in c.m. 1:5 incl. 15mm. thick cement plaster in c.m

1:3 inside and out side to exposed faces R.C.C. top slab with1:2:4

1 mix (1 cement : 2 sand : 4 grade ston aggregate 20mm size), 15.00 No

foundation concrete 1:5:10 with fixing Precast RCC. heavy duty

cover on top etc. inside dimension 455 x 610mm & 450mm deep

for single pipe

SMC SOR-PAGE NO 7 IT NO

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M

2 1:1 of following nominal internal diameters incl. Testing of pipes

and joints etc. Comp

SMC SOR-PAGE NO 7 IT NO

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

SMC SOR-PAGE NO 8 IT NO

Providing and fixing C.P brass screw down bib tap at all floor level

polished bright etc. comp.

SMC SOR-PAGE NO 8 IT NO

Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

SMC SOR-PAGE NO 8 IT NO

(D) RECHARGE BORE WELL (2 Nos.)

DESCRIPTION Qty. UNIT AMOUNT

Drilling 300 mm diameter borewell in all types of strata up to

required depth including cost of bentonite powder, carting rings,

cutter, other required materials, labour charges etc. complete. The

drilling shall be done by mud flushed rotary equipment and bore

holes should withstand at least till completion of subsequent

activities like assembly jointing, lowering of casing / strainer pipes,

gravels packing, yield testing etc, complete up to required depth as

shown in drawing

and directed by engineer –in- charge.

CE/HYD/01/2024-25 IT No

Supplying and filling clean best quality of well sorted - " SEVALIYA"

sorted pea gravel having size 6 mm to 10 mm in layer of required

thickness in filter chamber as per drawing and as directed by

Engineer –in- charge.

CE/HYD/01/2024-25 IT No

Providing and fitting bail plug having length 0.45mtr. from M.S

medium class pipe as per ISI for 200 mm diameter pipe.

Development of each water bearing zone come across up to the

depth of tube well (size 250 mm diameter & depth more then

4 2.00 JOB WORK

ft.) by lowering 100 mm diameter drop line and 32 mm diameter GI

air line for each Zone with air compressor of capacity not less.

Providing & Fixing MS Clamps with threaded of standard make

suitable for ERW pipes.

(a) For 200 mm Diameter ERW blank pipe with size 750 x 75mm x

10mm thick suitable for 200mm diameter.

Excavation for foundation in and all kinds of soil including leveling

and ramming the bottom of trenches and foundation pits, shoring,

6 strutting, dewatering if required, slush removing, filling the sides

up to original ground level for rectangular chamber and trench.

CE/HYD/01/2024-25 IT No

Providing and laying Cement Concrete M-100 grade 1:3:6 (1

cement: 3 coarse sand : 6 hand brocken stone aggregate 20mm

7 nominal size ) and curing complete excluding cost of form work in 1.24 C.M

chamber P.C.C(without forms work) work complete. .( S.O.R.-2023-

SOR 23-24 IT-05 PG-01

Providing & laying Fly ash Brick masonary having crushing

strength not less then 70kg/sq.cm. 1:6 (1 cement : 6 fine sand) with

scaffolding, watering, curing etc. complete with all labours and

materials.various area as directed by incharge .

SOR 23-24 IT-16 PG-02

Providing 10mm thick Cement Plaster in single coat on

brick/concrete walls far interior plastering up to Floor two level

and finished even and smooth in cement morter 1:3(1 cement

sand various area as directed by incharge) .

SOR 23-24 IT-24 PG-03

Providing, fixing M.S Jali frammed work (three piece with handle

fitting) on Opening portion Precast Module Structure for

Prevention of Recharge bore well structure,size including framme,

heavy required Angle (40 x 40 x 6mm), flat pati (25 x 6mm),cuttin

SOR 23-24 IT-98 PG-09

Providing & Supplying 200mm dia mater 1.5mm L.C.G (Low

Carbon Galvanise) 'V' wire screen pipe of Johnson or approved

11 make ISI including lowering, fixing, jointing in bore hole as per 24.00 R.M

aquifer depth and pipe assembly given as per site condition Soil

DESCRIPTION Qty. UNIT AMOUNT

Providing, Supplying, Fixing in bore hole 6Kg/cm2 P.V.C Pipe of

approved Quality (Prince,Suprem,Finolex) with ISI mark including

nesessary fittings and providing as per site sitution and directed by

Engineer –in- charge. ( 200 mm ( 8'') dia

Providing, Supplying, Fixing P.V.C. 6 Kg/Cm2 Pipe IS stanadard for

down take / inlet from Bldg./ Structure to Sand filter Chamber,

including piping/ plumbing, fitting, wall clamping, necessary

excavation and filling etc. complete as per site situation

(a) 110mm Dia.,6 Kg/Cm2 P.V.C. pipe. 7.00 R.M 325.00

(b) 160mm Dia., 6 Kg/Cm2 P.V.C. pipe. 20.00 R.M 525.00

Providing, supplying, fixing and installing M 300 Grade. precast

size 1.5 dia x 2.35 mt. height ,top 75mm thick in 2 half pieces Sand

Filteration chamber (2 layer Type of Precast module )as per

Design, Drawing.including necessary excavation, filling, dr

(a) 1 layer type of Precast module 0.00 NO. 18500.00

(b) 2 layer Type of Precast module 2.00 NO. 25000.00

Proving & fixing in position Johnson make and equivalent ... 'V'

wire L.C.G screen pipe 1.00 mm size of filter assembly of pair –ID

205mm & OD 217.50mm of 0.5mm slot size and ID 416 mm and OD

428 mm of 1.00mm slot size as per site situation

(a) 1.0 mt. length. 0.00 SET 7500.00

(b) 2.0 mt. Length. 2.00 SET 14000.00

Borehole Video photography all the fresh new fresh new bores or

16 few selected as desired for better understanding & clarity of work 2.00 JOB

undertaken as directed by Engineer -in-charge.

Supplying water tankers for constant water supply at tube well

Compressor work and cleaning of work site after completion of

entire job (testing) inluding cleaning of mud etc.Location as

directed by Engineer-in-charge.

Providing and Fixing Recharge Borewell name boards as per

standard I.R.C type design of steel plate including painting lettering

etc. complete with fixing in C.C 1:4:8 block with necessary

Soil Investigation Test report from Govt.approved authorised

laboratary (Prior inserting bore Pipe) of each bore shall be

19 2.00 EACH BORE

submitted by Contractor and soil sample of various starta shall be

first collected in Polythene bag and than submitted in transparent

Removal of surplus excavated earth of excavated mud-pits and

20 water harvesting chambers up to the lead of 5.0 km as per the 7.20 C.M

instruction of Engineer In Charge

(E) PARKING SHED, ELECTRICAL & FIRE ROOM

WORK UP TO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc.Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or soft soil

(1) Up to 1.5 Mt. depth 387.00 C.M 117.26

SMC SOR-PAGE NO 1 IT NO

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

stone agg 20m.m Nominal size)&curing comp. excl. cost of form

work in :(a) foundation

(A) Foundation 32.00 C.M 3005.76

SMC SOR-PAGE NO 1 IT NO

providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement.-

(A) foundation, footing, base of columns and mass concrete

SMC SOR-PAGE NO 14 MIX DESIGN

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 design mix concrete as per IS 456:2000 (latest

4 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement.

work in : Upto G.L./P.L.

(2) Having cross sectional area more than 0.085 sq. mt.up to

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86

(2) Having cros sectional area more than 0.08 sq. mt and upto

SMC SOR-PAGE NO 14 MIX DESIGN

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

graded stone agg. 20 mm nominal size) & curing comp. Includ. cost

5 of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of columns and

(C) Grade slab 84.00 C.M. 3637.34

(SOR SMC Pg No. 9 It No. 95)

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

6 R.C.C. work incl. bending, binding & placing in position etc. comp. 12990.00 Kg

SMC SOR, ITEM NO.-

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

(SOR SMC Pg No. 1 It No. 9) 4.00 C.M. 4237.00

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 551.00 C.M. 130.39

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

9 coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vertical ( two times ) up to good

quality and size of grain in elevation as per directed by engineer

(SOR SMC Pg No. 3 It No. 28) MR 49.00 S.M 324.00

DESCRIPTION Qty. UNIT AMOUNT

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi,algae and flaking paint. This

10 can be achieved by brushing with a wire/ stiff coir brush, followed 49.00 S.M

by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it

to dry for 4-5 hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator, curing,

11 testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 2.60 C.M. 11136.62

(SOR SMC - MIX DESIGN PG. NO-14)

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 2.00 C.M. 8075.85

(SOR SMC - MIX DESIGN PG. NO-14)

(3) Having more than 13 cm. Thickness

Ground Floor 3.00 C.M. 6727.93

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 0.50 C.M. 9419.25

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 1.10 C.M. 6913.25

(SOR SMC - MIX DESIGN PG. NO-14)

12 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.---

Ground Floor 1495.00 Kg 76.21

Brick work using common burnt clay building bricks having

13 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6

(1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 17.00 C.M. 4511.97

First Floor 3.00 C.M. 4786.95

(SOR SMC Pg No. 2 It No. 16)

DESCRIPTION Qty. UNIT AMOUNT

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

14 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 72.00 S.M 237.51

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

15 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 18.00 S.M 214.60

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire

mesh (FRP / PVC) at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag

by cement mortar 1:3 before applying the plaster, including curing,

scaffolding all complete as directed.

Ground floor 6.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Ground Floor 83.00 S.M 272.48

(SOR SMC Pg No. 3 It No. 27) MR

Providing throating or plaster drip and moulding it to R.C.C. chajja

etc.comp.. For all floor

Ground Floor 7.00 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

Ground Floor 7.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

20 jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

Ground Floor 9.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished Kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-cement : 3-coarse sand) and jointed with gray

21 cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Ground Floor 3.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

DESCRIPTION Qty. UNIT AMOUNT

Providing and constructing sandwitch type Granite stone platform

0.6 mt. wide & 0.75 mt. height, including one end side granite stone

(Double Polish) of 1.25 mt. height & front granite stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm

22 th. plaster in 1:3 with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors.

Ground Floor 0.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

23 including thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 90.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 90.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

24 even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

(A) for wall and similar surfaces

For all Floors 83.00 S.M 79.39

(B) for ceilings and soffits

For all Floors 0.00 S.M 79.39

SMC SOR , coiour works,Pg No.15,item no.-5

Providing and applying textured plaster as per design of ICI Dulux

or of Asian paint as per manufacturers specification and directions

in shade and colour approved by architects, on exterior surfaces of

25 the building including scaffolding, preparing the surface, watering, 83.00 S.M

curing etc. complete and as directed by the architects and

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall

be pasted on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade &

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 3.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

DESCRIPTION Qty. UNIT AMOUNT

Providing and fixing window having extruded aluminium colour

anodized section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.For all Floors.

(A) Same as above but colour anodized 5.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

Providing & laying granite slab 18 mm thick in Window-Door

seal,Frames Etc laid on 10 mm thick cement mortar 1:4 (1

Cement: 4 Coarse sand) with necessary adhesive material and

finished with flush pointing in white or colour cement, including

rubbing & polishing comp. (Basic Rate: Rs. 1000.00/S.M.).For all

For all Floors. 2.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

Labour Charges For Edge Finished For Granite for all floors

For all Floors. 34.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Steel work welded in built up sections,frame work including

cutting, hoisting, fixing in position and applying apriming coat of

red lead paint :-

30 (A) In beams and joists channels angles, tees, flats with connection

plats or angle cleats as in main and cross beams, hip and trussed 246.32 Qtl

purlins connected to common raffers and the like.

SMC SOR-PAGE NO 9 IT NO

Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded

in 1:1.5:3 concrete also horizontaly in line and connecting to

purline angle etc by welding rereting etc. (a) Medium duty "B"

SMC SOR-PAGE NO 10 IT NO

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to give

an even shade including cleaning the surface of all dirt, dust and

other foreign matters.

SMC SOR-PAGE NO 15 IT NO

Providing & fixing colouron galvaniced steel, zinc / aluminium

allus coated sheet 0.5 mm. thick roofing fixed with gslvanised

grom J or L hook bolts and bolt 8mm dia with bituman and impet

washer filled with white lead etc. Excluding the cost of purlins

rafter and trusses. (Tata / Jindal or equivalent)

SMC SOR-PAGE NO 9 IT NO

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm

size bolts, nuts, washers etc. including marking necessary

connection with rain water pipes. (i) 0.63mm thick

DESCRIPTION Qty. UNIT AMOUNT

SMC SOR-PAGE NO 9 IT NO 106 MR

LAWN : Area cleaning and side grading, removing unwanted

materials, plants, chrubs,wild grass, weeds,debris,rubbish,etc.

Excavating up to depth 30 C.M surface dressing leveling, making

slopes for drainage according to landscape, Disposal of unwanted

materials with all labour and tools. Development of lawn including

preparation of bed ground, spreading and mixing the good soil with

Farm Yard Manure, Gypsum, fertilizer soil with farm Yard Manure,

Gypsum, Fertilizer bas required hand specified. Planting of lawn

grass bits roots of approved quality, watering and specified.

Planting of lawn grass bits roots of approved quality, watering, and

specified. Planting of lawn grass watering mowing, weeding etc.

maintenance of developed lawn for a period of 6 months.

(As per Garden Dept.)

Supplying on site plants with following specifications . Plants

would be in good condition and of specified height. The rates

would be inclusive of all taxes, sales tax, Octroi,transportaion etc.

2 complete F.O.R. site. Conditions of plant would be verified at the

time of selction as well delivery. All complete and as per

instructions of the Engineer-in-charge.

Lagerstroemia thorell II - 3.66m ht 10.00 Nos. 270.00

Millingtonia hortensis - 3.66m ht 10.00 Nos. 270.00

Azadirachta Indica - 2.13m ht 20.00 Nos. 270.00

Gresses & Bamboos

Bambusa valgaris - 1.83m ht. 30.00 Nos. 75.00

Nephrolepis exalotta smithi - 0.45x0.30m 40.00 Nos. 20.00

Champa - 3.66m ht. 10.00 Nos. 270.00

(As per Garden Dept.)

ELECTRIFICATION WORK OF BUILDING

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

1 / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires, in below type of

pipe to be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal /

PVC / wooden box covered covered with appropriate front plate