PERIODICAL SERVICES TO CERTAIN UNITS AND OTHER THAN MARRIED BLDGS AND REPAIR TO JOINERY WALL PANELING AC SHEET FLY PROOFING AND OTHER CONNECTED ITEMS IN OTM ACCN AND CERTAIN UNITS UNDER THE AREA OF AGE BR-I ARMY CENTRAL IN ARMY AREA JODHPUR (9109/E8)

Amount

Note :- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ . (ii) Minimum 70% of the material required to be used for periodical work will be wupplied by contractor and material will be issued time to time by Engineer-in-charge. (iii) Makes of materials will be approved by GE in writing before commencement of work.

M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc., plastered or unplastered surfaces of walls and applying one coat of white wash, complete all as specified and as directed.

M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc., plastered or unplastered surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed.

M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc., plastered or unplastered surfaces of wall and applying one coat of lime colour wash on walls, complete all as specified and as directed.

M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc., distempered surfaces of wall and applying one coat of oil bound distemper white or tinted, complete all as specified and as directed.

M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc., distempered surfaces of ceiling and applying one coat of oil bound distemper white or tinted, complete all as specified and as directed.

M&L for preparation of old painted stone,bricks,concrete or plastered surfaces and applying one coat of plastic emulsion paint white or tinted, complete all as specified and as directed.

M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc., plastered on unplastered surfaces of wall,cornices and applying one coat of cement base paint, complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying three coats of white wash on walls including complete removal of existing treatment, complete all as specified and as directed.

M&L for preparation of old surface and applying two coats of oil bound distemper white or tinted on wall surfaces over a coat of wall care putty of (JK Birla white) including complete removal of existing treatment, complete all as specified and as directed.

M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc., surfaces and applying two coats of cement base paint on wall surfaces including complete removal of existing treatment, complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint (1st quality), complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint (1st quality), complete all as specified and as directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS-15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silico additives @ 1.43 ltr/10 Sqm, complete all as specified and as directed.

M&L for preparation of old painted surfaces of name/number plates and applying one coat of synthetic enamel paint (1st quality) including wirting of letters, complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key , scrubbing down with water etc., complete all as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar C:M 1:6 and finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of wall concrete surface Chajja/Facia in any height in C:M 1:4, complete all as specified and as directed.

M&L for rendering 5mm thick on ceiling surfaces in cement mortar 1:3 and finishing surfaces even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted over a coat of wall care putty of (JK Birla white), complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as directed.

Supply and fabrication of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and anging; also fastening and fixing, complete all as specified and as directed.

M&L for mild steel framed work as in brackets etc for cooler stands,supportings frame work for sun shade etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc., complete all as specified and as directed.

S&F in repair SS curtain rod 25mm dia with two knobs, (Fancy type), at the end to match the curtain rod, complete all as specified and as directed.

Taking down steel window/ventilator including guard bar, complete all as directed.

S&F of steel ventilator, top hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F of steel ventilator, top hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F of steel window with side hung shutter, including box type hinges, with steel handle, and steel peg stay, complete with glazing bars, with or without cooler opening, dovetailed or welded, complete all as specified and as directed.

All as per item No. 31.00 above but without glazing bars, complete all as specified and as directed.

Supply and fabrication of Mild steel guard bars and welded to window frames, complete all as specified and as directed.

Taking down of chowkats or frames without taking down shutters from frame, not exc 1.50 Sqm, complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frame) exc 1.5 Sqm but not exc 4 Sqm each, complete all as directed.

M&L for Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each, complete all as directed.

S&F of 35mm thick, (2nd class hard wood) factory made Gauged and, skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., complete all as specified and as directed.

S&F 35 mm thick, (2nd class hard wood) factory made, paneled door shutter ( two pannel) with lock rail and panel of 9 mm thick BWP commercial ply or 12 veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (part-I) klin seasoned and chamically treated, complete all as specified and as directed.

S&F Flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed by Engr-in-charge.

S&F of factory made, solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. Make : Rajshree

S&F solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S&F stainless steel butt hinges, 100 mm size, complete all as specified and as directed.

S&F of aluminium anodized,tower bolt 150 mm long, complete all as specified and as directed.

S&F aluminium anodised handle extruded section of size 150mm long, complete all as specified and as directed.

S&F of Aluminium alloy, anodised, sliding door bolt 16 mm dia & 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.

M&L for fabrication of pressed steel cupboard shutters, using 1.00 mm thick, MS plain sheet & with frame 1.25mm thick bent to shape including two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle (Godraj) etc., complete all as specified and as directed.

Hacking out old broken glass (any thickness,size quality or description) from metal frames including punching or drilling out old glazing pins & spring clips and provding &new ones, complete all as specified and as directed.

M&L 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane, complete all as specified and as directed.

S&F in repairs 4 mm thick figured glass, panes pin headed type, complete all as specified and as directed.

S&F galvanised mild steel wire cloth of 0.40 mm nominal dia of wire and 1.20 mm average width of aperture fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.

S&F in repairs for galvanised mild steel wire cloth, 0.40 mm nominal dia of wire and 1.20 mm average width of aperature fixed with and including palin MS flat iron with galvanised wire stapples with and including necessary welding, nut bolt etc as in steel door window or door, complete all as specified and as directed.

M&L for two coats of synthetic enamel paint (First quality) over a coat of pink primer on new wooden surface, over 10Cm width or girth including preparation of surface synthetic, complete all as specified and as directed.

M&L for two coats of enamel paint (First quality) over a coat of red oxide primer on new steel surface including preparation of surface over 10cm width or girth, complete all as specified and as directed.

M&L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Eng-in-charge.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/M including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/M including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and as directed.

"Supply only" rubber beading, complete all as specified and as directed.

S&F Aluminium anodised decco grill of grid size (50 x 50mm/ 40 x 40mm), complete all as specified and as directed.

M&L for Solar control film 25 micron, reflective type, sticked to glass panes as per manufacturers instructions, complete all as specified and as directed by Eng-in-charge.

S&F Door closer, hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed, complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.45mm nominal dia wire and avg. width of aperature 1.40mm and fixed to aluminium, complete all as specified and as directed.

Dismantling of AC/ fiber glass ( corrugated, semicorrugated etc.,) sheet in roof covering, complete all as specified and as directed.

S&F 2mm thick, fiber glass, reinforced translucent corrugated sheeting, with two corrugation side lap fixed with L type or J type or cranked hook bolts washer in roof etc., complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Including dismantaling of existing sheet, complete all as specified and as directed. Make : JSW/ TATA Bluescope

S&F of stainless steel butt hinges 100 mm size, complete all as specified and as directed.

S&F 100mm size single action door spring hinge, complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body (best quality) and toungue anodised with hard drawn steel spring 140mm long, complete all as specified and as directed.

Dismantling wrought iron or mild steel work, of any description, complete all as directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or Forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed.

Dismantling of wall and ceiling board ( fiber, pulp, insulation etc.,) or insulation board/ slabs/ blanket, any thickness including over filling, complete all as specified and as directed.

S&F snap grid frame work of pre powder coated pre fabricated, GI section (Inculding hangers) for false ceiling of size 600x600 mmm with ceiling board PVC laminated gypsum board 8 mm thick and fixed as per manufacturer instructions as per sample kept in GE office, complete all as specified and as directed. Make : Gyprock

M&L PVC Wall Lining, interlocking 5mm thick, plain colour, fitted into the wall with strips including fillets on joints as per manufacturer’s instructions, complete all as specified and as directed by Engr-in -charge.

Dismantling of expended metal, any thickness or mesh, weight exc 4 kg per Sqm fix with steel or wood fillets if any, complete all as specified and as directed.

M&L steel rolling shutter thickness of lathe 1.25 mm without wall wearing as spacified including top cover anchoring rod hasp and staple and one soap coat of primer erecting in position as included ,complete push pull or manual type, complete all as specified and as directed.

M&L for greasing of existing rolling shutter and making in serviceble condition including smaller part such as bearing etc., complete all as specified and as directed by Engr-in-charge.

M&L for welding in repair exc 2.5 cm but not exc 5 cm in length thickness of metal to be welded not exc 6mm, complete all as specified and as directed.

M&L repair to window including taking down replacement of unserviceable hinges device box type handle making them serviceable condition on refixing on same opening making the soffit and jomb good condition, complete all as specified and as directed of Engineer -in -Charge .

M&L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joint supplied and fixed, complete all as specified and as directed.

S&F as in repair providing pre laminted particle board, exterior grade, prelaminated both sides, and decorative choice fixed for kitchen cupboard and shelving complete 18 /19 mm thick, complete all as specified and as directed.

S&F continuous hinges mild steel, bright finish or electroglavnised width of flap 30mm, complete all as specified and as directed.

S&F hasp and staple of aliminium aodised 75mm in long, complete all as specified and as directed.

S&F 40mm dia cupboards knobs fixed with nuts screw and washer of aluminium anoised, complete all as specified and as directed.

Demolition of stone slab as in shelves laid dry and pointed in any mortar, complete all as directed.

M&L for 18-20 mm thick mirror polished, Kota stone, as in shelves fixing in walls/ Floors over 10mm thick screed bed in CM 1:3 inculding grinding polishing etc., & making good, complete all as specified and as directed.

Note :- (i) Contract Sum shall be arrived at after deduction of amount of Schudule of Credit.

M/S KAUTILYA GARG

Narendra General Suppliers