HEW219 2nd Recall

[13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [Through Rate]

[13.32]Providing and fixing bolts including nuts and washers complete. [Through Rate]

[23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages. [Through Rate]

[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate]

[24.3.4.2]HT CABLE 4.2. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 150 to 185 sqmm [Through Rate]

S/E of 300mm2 single core aluminium conductor PVC insulated cable as per ISS: 1554/P-I completes in all respect up-to the entire satisfaction of E-I-C.

S/E of PVC unsheathed aluminum conductor cable single core 1100 volts grade in pipe of size 50 Sqmm excluding cost and erection of pipe.

S/E of 11 mtr long PCC pole as per IS: 1678-1960 specifications, Dimensions 140mm x 200mm at top and 140mm x 400mm at bottom with working load of 400 Kg buried 2.20 m in ground or as per UHBVNL Specification.

S/E of 100mm2 ACSR conductor conforming to IS 398 ( Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments and erection of the same with accessories including stringing and sagging of conductor as well as jointing and binding with insulator at supports in all respect.

S/E of 9 mtr long PCC pole as per IS:1678-1960 specifications. Dimensions 105mmx115 mm at top and 105 mm x315 mm at bottom with working load of 200 Kg, buried 1.80m in ground or as per UHBVNL Specification.

Supply and erection of stay set for L.T. Line complete in all respect with stay wire egg insulator comprising M.S. rod of 20mm dia 8` long with stand 1000 Kg. load and threaded upto 250mm long with cross channel of size 450mm x 450mm made out of M.S. Channel 75x40mmx 6mmx6mm upto the entire satisfaction to Engineer-in-Charge of the work.

S/E of Three Phase 11KV/ 0.433KV-250v, 200 KVA, Oil immersed, naturally cooled, Aluminium Wound Outdoor type Distribution Transformers with CSP (Completely self protected) features with external microprocessor based MCCB, strictly conforming to Nigam’s Technical specification No. CSC-V/R-I/DH/UH/P and D/2010-2011 read with amendment thereof and as per relevant ISS as amended from time to time and losses confirming to 4 star rating of BEE as per App. Make and specification of DHBVN/UHBVN including making of platform and installation of transformer up-to the entire satisfaction of E-I-C. Voltage Rated Frequency permitted at 75º C i) Maximum load losses at 50% load at 75º C = 780 Watt ii) Maximum losses at 100% load at 75º C = 2300 Watt iii) Warranty = 78/72 Months shall be one time. The above losses are maximum allowable and these would not be any positive tolerance.

S/E of fuse unit L.T. side of 200 KVA transformers complete with wooden board cleats, aluminum strips MS clamps and MS nut and bolts including all petty material required up to the entire satisfaction of Engineer-in-Charge

S/E of 11 KV G.O. Switch with 9 Nos. Post insulator suitable heavy duty with suitable copper male and female contents for 11 KV conforming to ISS: 1816/1972 and ISS : 2544/ 1963 with latest amendment thereof complete in all respect.

S/E of 11 KV lightening arrestor S/Stn type 9 KV 10 KA heavy duty type complete with MS nut and bolts including all petty material required upto the entire satisfaction of E-I-C.

S/E of 11 KV pin insulator polymeric type with 11 KV G.I. pin complete set on PCC pole of Make: Rashtriya/approved by state Electricity Nigam, conforming to IS: Part-II 1974 and IS: 2486 Part-I of 100mm GI pin to hold the insulator of 100mm GI pin to hold the insulator complete in all respect upto the entire satisfaction of E-I-C.

Supply, erection, testing and commissioning of L.T. Arial Bunched cable 120 Sqmm x 4C plus 95 Sqmm x1 core messenger wire P.V.C. sheathed on existing PCC pole, Conforming to IS standard and with latest amendments there to complete in all respect up-to the entire satisfaction of E-I-C. Make: Polycab/Havell’s /Grandlay

S/E of stay set for HT Line complete in all respect with stay wire Disc insulator comprising M.S. rod of 20mm dia 8’ long with stand 1000 Kg. load and threaded upto 250mm long with cross channel of size 450mm x 450mm made out of M.S. Channel 75x40mmx6mmx 6mm up-to the entire satisfaction to E-I-C

Supply and erection of Suspension clamp Dead end clamps and eye belts for sagging of 11KV XLPE Aerial Bunched cable suitable for 50sqmm x 3 core to 240 sqmm x 3 Nos complete in al respect upto the entire satisfaction of Engineer-in-charge of the work Suspension

Supply and erection of Suspension clamp Dead end clamps and eye belts for sagging of 11KV XLPE Aerial Bunched cable suitable for 50sqmm x 3 core to 240 sqmm x 3 Nos complete in al respect upto the entire satisfaction of Engineer-in-charge of the work eye bolt

Supply and erection 11 KV XLPE H.T. cable, stranded compacted circular Aluminum conductor, screened with extruded semi conducting compounded, XLPE insulated, galvanized steel flat screen armored and overall PVC sheathed cable confirming to IS7098 (Part-2) 2011 with upto date amendments, loose in existing pipe or trenches including making necessary connections complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. 185 sqmm, 3core XLPE cable Make:- Havell’s, Polycab, Grandlay