AMRUT 12 MLD Treatment Plant at Kureepuzha Supply convey and install pumpsets at the tubewell in Kureepuzha and associated pipeline works -Pipeline Work

Amount

APP- A -Supply and Erection of pump set

OD10551/2024-2025:Supply, erection, testing and commissioning of Brand new Submersible pump set having ISI mark having minimum discharge of 167 LPM and 90m head + losses in accordance with the yield of the tube well and against a total head as instructed by the deptl officers, with bronze impellers, SS316 shaft etc working in 3 ph AC main as per IS specification with minimum efficiency of 70% . The rate quoted inclusive of 5m , 80 mm GI B class pipe and specials, 5m 4 sq.mm cable , 7.5 HP Pump set ,15HP fully automatic star delta starter and 3 phase panel board with 63A,ELCB ,suitable capacitor ,fuse unit ,earthing materials and connected equipments of approved manufacturers , interconnection of outlet with existing distribution line using suitable specials, earthing by using 8 SWG copper wire, supply and fixing standard type floor mounted panel board, supplying copper cable of required length and size, providing cable connection from panel board to starter and starter to motor etc, supply and fixing suitable type CI D/Sluice valve , reflux valve, pressure gauges, power capacitor, single phase and dry & running preventors, earthing main switch board with all units as per IE Rules, hire for tools, supplying ,fabricating and fitting meter box as per KSE I rules for fixing the meter and fuse unit of KSEB etc complete as per the direction of departmental officers.

OD10552/2024-2025: Charges for supplying best quality 3 core 4 sq mm flat copper cable for erection work

OD10553/2024-2025:Supply, Conveying , laying of 65mm uPVC column pipe including coupling

OD10658/2024-2025:Supply , Conveying and fixing of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.6, Size 65mm. with all accessories

OD10663/2024-2025:Supply, conveying and fixing of Sluice Valve,Size 65mm including all specials

18.12.8:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work80 mm dia nominal bore

18.13.2:Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete:50 to 80 mm nominal bore

18.40.8:Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality;80 mm diameter pipe

OD10554/2024-2025:Fabricating and interconnections works form existing 80 mm GI Pumping main from top of the tube well to 65 mm PVC/MS distribution line including providing Tee joint,3 Nos of 80 mm G I bent , 80mm GI couplings - 2 no.s, 10 Nos MS flange for fitting control valves including cost of bolts, nuts ,supplying 50mmx65mm CI heavy duty male adapter and female threaded adapter , Supplying 65mm CI adapter-2 no.s , Supply of 65mm MS calmp for clambing pumpsets - 2no.s, and foundation to the top of the well mouth using 80/suitable mm GI pipe suitable to proper horizontal alignment, welding together<br>to water tight joint including earth work excavation cost of all materials , labour charges ,hire charges of welding machine, cutting / grinding machine etc

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

OD10555/2024-2025:Cost of PVC Specials

OD10556/2024-2025:Approved rate of pump erection charge

OD10557/2024-2025:Supply of16mm wire rope

Pumping Main and allied work

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

OD10549/2024-2025:Interconnection with existing tanks / walkway slabs / sidewalls .

100.9.7:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 75 mm nominal outside diameter pipes.

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.98.222:Supply of PVC Pipe, 8kg/cm2, 75mm Dia.

100.9.5:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 50 mm nominal outside diameter pipes.

100.98.220:Supply of PVC Pipe, 8kg/cm2, 50mm Dia.

OD10550/2024-2025:Supply of Specials including supply of 75mm - Tee, 75mm elbow, 75 mm Upvc Bends , 90 x 75 mm PVC reducers,75 x 50 mm reducers , IR sheets,Solvent cement, etc including all excavation, fittings , etc branching 75 mm pac to concerned tanks

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

18.17.6:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Automation Arrangement

OD10559/2024-2025:Supply of fully automatic star delta starter for10 HP-400V with a relay rande of 9-14 Amps including all electrical works associated upto KSEB meter

OD10560/2024-2025:Supply of M POWER module 2 nos. (1 as standby) for mobile starter for motor.

OD10561/2024-2025:Installation charge for sub pump controller kit.

OD10562/2024-2025:Supply of SIM , SIM kit and including plan for one year

OD10564/2024-2025:Supplying Mobile operated GSM based module for operation of starters and controllers from anywhere using mobile phone with design tested to perform reliably even in extreme environmental conditions, suitable for single phase and three phase installations, communication with IVRS in local languages, 3user can control the operation, power fail and feed back SMS in regional languages, four different "time of day" can be set in a day for pump operation, controls daily operations of a pump for pre-defined periods and ease of operation with advanced facilities such as auto switch off while dry run with in fraction of seconds, low voltage preventer, phase change preventer, low voltage cut off, online monitoring system etc of reputed make.

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

12.1.3:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

18.38.6:Painting G.I pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work:50 mm diameter pipe

18.40.7:Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality;65 mm diameter pipe

OD61623/2024-2025:Water Flow Meter Diameter -Size : 65 mm Temperature : T30 or T50 Material : Cast Iron Body - Water Flow Meter Diameter : 4xM16 Maximum Pressure : MAP16 , Minimum Reading : 0.0005 m³

Udaya Kumar K

Bidder Name

S.Shaji

Udaya Kumar K