Loading
Loading…
Loading…
Tender Value
₹9.7 L
EMD Value
₹19,372
Closing Date
21 Oct 2026, 6:00 pm
LT COL CHETAN KOTKAR, GE (SOUTH) AMBALA
GE (SOUTH) AMBALA CANTT
GE(SOUTH)/AMB 54/2026 2027 PROVISION OF PARKING SHED FOR 04 RDR SPL VEH WITH HARDSTANDING AT UNIT EQPT PART UNDER GE (SOUTH) AMBALA CANTT
2026_MES_791572_1
GE(SOUTH)/AMB-54/2026-2027
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) AMBALA CANTT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (SOUTH) AMBALA CANTT
₹19,372
Yes
29 Sept 2026
29 Sept 2026
23 Oct 2026
29 Sept 2026
21 Oct 2026
14 Oct 2026
29 Sept 2026 - 13 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating in post holes (or similar holes) each not exc 0.50 and Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed by Engineer-in-Charge. | 10 | EACH | - | - |
| 2 | Material and labour for PCC 1:3:6 type C2 by (using 40 mm well graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge | 3.6 | CUBIC METER | - | - |
| 3 | Supply and fixing rolled mild steel sections as in main and cross beams,hip and jack rafters, purline where connected to common rafters and running rails and guides for sliding doors fixd with angle cleats or other connecting plates of Fe-410W (Gde-E-250) complete all as specified and directed by Engineer-in-Charge | 2,950 | KILOGRAM | - | - |
| 4 | Supply and fixing steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 complete all as specified and directed by Engineer-in-Charge | 650 | KILOGRAM | - | - |
| 5 | Material and labour for plates (plain and chequered) channels, square cut or notched ( ordinary and counter sunk) forming holes without any attachment of Fe-410W(Gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge. | 180 | KILOGRAM | - | - |
| 6 | Material and labour for two coat of synthetic enamel paint over a coat of red oxide primer on steel surface including preparation of surface over 10cm width or girth complete all as specified and directed by Engineer-in-charge. | 150 | SQUARE METER | - | - |
| 7 | Supply and fixing Pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. | 240 | SQUARE METER | - | - |
| 8 | Supply and fixing Pre - painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in ridge portion , fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. | 12 | SQUARE METER | - | - |
| 9 | Material and labour for 75mm thick plain cement concrete 1:4:8 type D2(using 40mm graded stone aggregates) as in sub base complete all as specified and directed by Engineer-in-Charge. | 220 | SQUARE METER | - | - |
| 10 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge | 5.5 | CUBIC METER | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
Tenderdocuments54.pdf
Tender Documents • 1.81 MB
BOQ_887471.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .