Deposit work 2022 23 Urgent restoration work to Peringottukara Mosque Post Office road 0 000 to 1 623 due to pipe laying of KWA

Amount

Road works

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

OD25976/2023-2024: Supplying and spreading special granular material/moorum in the eroded portions of BT edge ,deep pot holes and low level berms as per the direction of the deptl .officers at site including cost of materials ,conveyance and labour charges etc complete.

4.1.A.1:Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with a motor grader on the prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Grading-I - Plant Mix Method

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.b:Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared Granular Surface cleaned with mechanical broom.

OD235637/2022-2023:Providing, laying and rolling of close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen to required line, grade and levelto serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel static roller of80-100 KN static roller and finishing l to required level and grades as per technical specification clause 509 of MORD.

OD235638/2022-2023:Engaging Coolie for petty works

N P MOHAMED MON

MUHSIN MOHAMED

Bidder Name

N P MOHAMED MON

shihab k.a

MUHSIN MOHAMED