Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.8 L
EMD Value
₹5,537
Closing Date
15 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE(C),BCD,EKM
4th floor,CTO bld,Karakkatt rd,EKM
Separation work of boundary between CSC building Thoppumpady leased to UBI and BSNL premises and other works
2023_BSNL_153651_1
10/EE-BSNL/CD/EKM/2023-24
Open Tender
Civil Works - Buildings
Item Rate
30 days
Thoppumpady
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
AO(Cash),O/o PGMT,BSNL,EKM
₹5,537
Yes
18 May 2023
9 May 2023
17 May 2023
9 May 2023
15 May 2023
9 May 2023
Amount
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
a)All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level ::
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form for:
a)Lintels, beams, plinth beams, girders, bressumers and cantilevers
b)Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Providing and laying precast machine moulded solid blocks in block masonry of specified thickness with blocks of grade D5 with minimum compressive strength 5N/sqmm and block density 1800kg/cum conforming to is 2185 nominal size 300x200x150 mm in cement concete 1:4:8 (1 cement:4 coarse sand :8 graded stone aggregate 12 mm nominal size ) with cement mortar 1:4( 1 cement:4 coarse sand)including scafolding raking out joints and filling joints with cement mortar finishing neatly etc above plinth level upto all floor level all complete as per the direction of engineer in charge
12 mm cement plaster of mix :
a) 1:6 (1 cement: 6 fine sand)
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
On steel work
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing PTMT stop cock of approved quality and colour.
15 mm nominal bore, 86 mm long, weighing not less than 88 gms
Providing and fixing PTMT pillar cock of approved quality and colour.
15 mm nominal bore, 107 mm long, weighing not less than 110 gms
Providing and fixing UPVC pipes, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-charge. Exposed on walls external work. 40mm pipe,10kgf /sqcm
Interconnecting the PVC water tanks at suitable location including the cost of FTA ,MTA and similar suitable fittings etc complete with a)40mm dia pipe
Providing and fixing uplasticised PVC connection pipe with brass unions :a)30 cm length i) 15 mm nominal bore
Providing and fixing factory made uPVC door frame made of uPVCextruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in-charge
Extruded section profile size 48x40 mm
Providing and fixing to existing door frames.
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge.(For W.C. and bathroom door shutter).
Cleaning PVC overhead water tank of capacity 500 to 1000 L, including washing the insides thoroughly with chlorine loaded water, and mopping the inside dry after thorough washing, including checking for any leakage all complete. Remediation of leakage of tank shall be paid for separately.
Providing and fixing PVC trap of self cleansing design with PVC screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : a) 100 mm inlet and 75 mm outlet
Finishing walls with textured exterior paint of required shade :
a)Old work (One or more coats) applied @ 1.82 ltr/10 sqm
b)New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
Clearing manholes of size up to 90x80cm by taking out the solid sludge , burying the same at required location as directed by the engineer in charge.
Clearing the soil waste line( stone ware ) from south East side manhole of WC to Septic tank on west side of building for distance upto 20 metres including excavating earth of required width and depth , breaking the soil waste lines at required locations up to three nos and removing the accumulated sludge ,burying the sludge at required location ,washing the pipes with water under pressure and rejointing the pipes with 2mm thick pvc sheet of width up to 30cm and covering with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)of thickness 10cm and refilling the excavated earth etc complete.
Repairing the channels of manhole of size up to 90x80cm inside meassurement with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) and finishing with a floating coat of neat cement.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes
a)75 mm diameter
b)110 mm diameter
Cleaning septic tank of capacity up to 50 users by completely removing the sludge and sewage by suction pumps into tanker of capacity 6000 litees with valid municipal license and disposing the same at locations approved by muncipal authorities , including filling the tank with fresh water after work.
Suplying and installing PVC readymade septic tanks of required size and as per the instruction of engineer in charge.The tanks should be made of PVC with sufficient thickness and quality to withstand the pressure from internal and external forces as per the local soil conditions and the connections should be made of best quality PVC pipes.The rate includes the cost of transportation ,unloading and hiring handling equipment required for the installation and nothing extra shall be paid on any account.
1000 litres with 25 flushes per day
Repair to Aluminium door including dismantling and reassembling using new pivot and members if required etc complete.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
Supplying residential 15mm dia single jet water meter at site
Vaigues Padamadan
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .