ANNUAL RATE CONTRACT FOR PROVIDING AND APPLYING HOT THERMOPLASTIC ROAD MARKING PAINT (ASIAN, BERGER & As per MORTH) WITH GLASS BEADS, Molded Shank Raised Pavament Markers And Solar Stud in Karanj, Umarwada, Magob-Dumbhal and other area of East Varachha) Zone-A.

EAST (VARACHHA) ZONE-A

NAME OF WORK : ANNUAL RATE CONTRACT FOR PROVIDING AND APPLYING HOT THERMOPLASTIC ROAD

MARKING PAINT (ASIAN, BERGER & As per MORTH) WITH GLASS BEADS, Molded Shank Raised Pavament

Markers And Solar Stud in Karanj, Umarwada, Magob-Dumbhal and other area of East (Varachha)

Item Rate Amount

Particulars Quantity Per

Providing and applying 2.50 mm thick hot

applied thermoplastic road marking of white /

yellow colour on bituminous / concrete surface with fully

automatic machines as per detailed drawings /

engineers instructions for Lane markings, edge

markings / arrows including materials, labour charges,

tests required to be carried out etc. complete as per

details in tender specification & as directed by

A For Edge line marking of 15cm width

B For Center Line marking of 10cm width

C For pedestrian markigns at junctions (Zebra Crossing)

D For pedestrian markigns at junctions (STOP LINE)

E Letter markigns at junctions

F Direction arrow markigns at junctions

G For lane line marking of 15cm width

Supplying of Molded Shank Raised Pavement Markers

made of polycarbonate and ABS molded body and

reflective panels with micro prismatic lens capable of

providing total internal reflection of the light entering the

lens face and shall support a load of 16000 kg tested in

accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height,

width and length shall not exceed 50 mm, 100 mm and

2 mm and with minimum reflective area of 13 Sqcm on each 275.00 217.40 Nos.

side and the slope to the base shall be 35 +/-

degree. The strength of detachment of the integrated

cylindrical shanks, (of diameter not less than 19 +/-

mm and height not less than 30+/- 2 mm) from the

body is to be a minimum value of 500 Kgf. Fixing will

be by drilling holes on the road for the shanks to go inside,

without nails and using epoxy resin based adhesive as per

manufacturer’s recommendation and complete as

directed by the engineer. (3M or Equivalent Brand)

Solar Stud: Supplying of Solar Raised Pavement

Markers made of polycarbonate molded body with circular

shape, solar powered, LED self illumination in active

mode, 360 degree illumination and reflective panels

with micro prismatic lens capable of providing total

internal reflection of the light entering the lens face in

passive mode. The marker shall support a load of 20000 kg

tested in accordance to ASTM D 4280. The marker should

be resistant to dust and water ingress according to IP

standards and should withstand temperatures in the range

of 0 C to 70 C. Color of lighting could be provided in red or

yellow (amber) as per requirement and typical frequency of

3 blinking is 1 Hz. There should be current losses of less 255.00 2068.00 Nos.

than 20 micro- amperes at 2.4 V in sleep-charging mode

to enhance the life of the marker and a full charge

should provide for a minimum autonomy of 50 hours.

The height, width and length of the marker shall not

be less than 10 mm x 100 mm x 100 mm. Also, the

surface diameter of the marker shall not be less than

100 mm respectively. The weight of the marker shall

not exceed 0.5 Kilograms. Fixing will be by drilling

holes on the road for the shanks to go inside, without nails

and using epoxy resin based adhesive as per

manufacturers recommendation and complete as

directed by the engineer. (3M or Equivalent Brand)

Estimated Amount (Rs.)

Executive Engineer

East (Varachha) Zone-A

Surat Municipal Corporation