Building

Name of Work :- Const. Of Various Anganwadi Building at Sanand Ta.

Sanand Dist. Ahmedabad Package No. AHD/Anganwadi/25 (2026-2027)

(Kolat-1, Chcharvadi Vasna-1) Total-2

Memorandum Showing items of Works to be Carried out

Sr. Item of Work Quantities Unit Tender Total

No. estimated RatesIn Amount

but may Figures According to

be more Rs.P.S. Estimated

or less Quantities

1 Item no- 1 Excavation for foundation upto 1.5 122.820 Cum 149.67

mt.depth including sorting out and stacking of

useful materials and disposing of the excavated stuff

up to 50meter lead (B) Dense or Hard soil

2 Item no- 2 Carring out plinth treatment to post 137.820 Sqm 105.95

construction / existing structure by spraying

chemical solution for termite control treatment

including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles

20 EC. As per 6131_ part- II Consentration Weight

one percent is recommended i.e. one litre 20 EC

chemical emulsion dillute with 19 liter give 1 %

concentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical /

Sqmt. of surface is recommended as per I.S.

3 Item no- 3 Providing and laying cement concrete 16.960 Cum 2838.81

1:4:8 (1- Cement : 4- coarse sand : 8- crushed stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

4 Item no- 4 Providing and laying cement concrete 16.820 Cum 3228.39

1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone

aggregate 40mm normal size) and curing complete

excluding cost of formwork in (A) Foundation and

5 Item no- 5 Filling in plinth with sand under floors 28.540 Cum 460.19

including watering ramming, consolidating and

dressing complete.

6 Item no- 6 Filling foundation and plinth with 268.000 Cum 289.06

murrum or selected soil in layer of 20 cm in

thickness including ramming watering and

consolidating etc. complete

7 Item no- 7 Filling available excavated Earth 46.140 Cum 130.39

(Excluding Rock ) in trench plinth side of

foundation . in layer not excluding 20 cm in depth

consolidation each deposited layer by ramming

and watering etc. complete

8 Item no- 8 Providing and laying cement concrete 3.680 Cum 4046.21

1:3:6 (1 cement : 3 coarse sand : 6 crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of form work in (A) Wall

9 Item no- 9 Providing and laying ordinary cement 2.420 Cum 8963.84

concrete 1:1.5:3 (1 Cement : 1.5 corse sand :

graded stone aggregates 20mm nominal size) and

finishing smooth with curing etc. complete

including the cost of formwork but excluding the

cost of reinforcement of R.C.C. work in (A)

BEAMS :(ii) Having cross-sectional area more than

0.05 Sq.m. and up to 0.08 Sq.m.

10 Item no- 10 Providing and laying ordinary cement 0.640 Cum 9090.84

concrete 1:1.5:3 (1 Cement : 1.5 corse sand :

graded stone aggregates 20mm nominal size) for

R.C.C. Lintel including finishing smooth with

curing etc. complete including the cost of formwork

but excluding the cost of reinforcemen

11 Item no- 11 Providing & laying Ordinary cement 14.640 Cum 7258.19

concrete 1:1.5:3 (1cement : 1.5 coarse sand 3 graded

stone aggragate 20 mm nominal size) and finishing

the smooth with curing etc. complete including the

cost of formwok but excluding the cost of

reinforcement for RCC work in (II) slabs having

more than 10 cm and upto 13 cm thickness.

12 Item no- 12 Providing T M T. bar reinforcement of 1874.000 Kg. 76.21

Fe-500D for R.C.C. work including bending

binding and placing in position complete up to All

13 Item no- 13 Brick work using common burnt clay 67.080 Cum 4051.78

building bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand) B)

14 Item no- 14 Brick work using common burnt clay 45.540 Cum 4326.75

building bricks having crushing strength not less

than 35 kg./ Sq.Cm. in super structure in

Cement Mortar 1:5. (1- Cement : 5 -fine sand)

(B) Conventional

15 Item no- 15 Half brick masonry in common brunt 22.140 Sqm 653.17

clay building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in super structure above

plinth up to floor two level Conventional Bricks for

16 Item no- 16 Providing and fixing alluminium 10.880 Sqm 5990.68

anodised glazed door rectangular frame 60mm x

40mm x 2mm @ 1.037 Kg./ Rmt. weight, flush door

shutters, solid core construction with frame of first

class hardwood with cross board and face veneer or

plywood face panels , including anodised

alluminium butt hinges with necessary screws.

including Laminated sheet 1 mm thick,S.S. stoper

30cm long ASIS 304 grade,S.S. Aldrap 30cm long

ASIS 304 grade,S.S. Handle 15cm long ASIS

grade,S.S. Handle Door stop ASIS 304 grade(2)

17 Item no- 17 Providing and fixing window having 9.580 Sqm 1713.70

extruded aluminum Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094 Kg / Rmt, horizontal two track member size

Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with

sliding shutters of horizontal member size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as

per details etc complete for window.

18 Item no- 18 Providing and fixing standared extruded 6.320 Sqm 1175.56

of alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

19 Item no- 19 Providing and fixing M.S. grills of 396.880 Kg. 106.07

required pattern to wooden frames of windows etc.

with M.S. flats at required spacings and frame

alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill.

including Applying priming coat and Painting two

coats (excluding priming coat) etc. complete.

20 Item no- 20 Providing and laying Vitrified tiles 8 90.500 Sqm 1484.61

to10 mm thick, 36'' x36'' in flooring treads of step

sand landing laid on a bed of 12mm thick cement

mortar 1:3 (1 cement : 3-coarse sand ) finishing with

flush pointing in white cement.

21 Item no- 21 Providing & Fixing 30 mm thick 23.560 Sqm 709.06

polished Kota-stone slabs for Shelves of Cupboard

shelves including making grooves in walls and

finishing with C.M.( 1:1) and polishing etc.

22 Item no- 22 P & L 24"x24" vitrified 8mm thick tile 3.520 Sqm 1397.83

flooring over 20mm(average) base of cement

mortar 1:6 ( 1 cement:6 coarse sand) on new surface

or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and

jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.

complete for antiskit

23 Item no- 23 Providing and laying Vitrified tiles 8 50.040 Sqm 1538.85

to10 mm thick ,in skrting risers of steps and dedo on

10 mm thick cement plaster 1:3 (1-cement :3-coarse

sand) and jointed with white cement slurry

24 Item no- 24 Providing and laying broken china 106.720 Sqm 747.29

mosaic flooring for Terrece using 12mm to 20mm

of broken piece of glazed tiles to be laid over cement

mortar bedding of CM (1:3) to plain or slope & to

be tempered to bring Mortar cream out upto surface

using white cement including rounding off junction

and extending them up to 15 cm along the wall

clearing water and oxalic acied etc as directed

25 Item no- 25 Providing and fixing machine cut, free 51.360 Sqm 2823.61

edges, mirror polished Granite stone slab 18 mm

thick for vertical wall/ Doors/ Windows Sill, Jams

for cladding as per design including full moulded

round inside edge and laid on 10 mm thick cement

mortar 1:3 ( 1 cement: 3 coarse sand) jointed with

grey cement slurry including rubbing and polishing

finishing etc. complete.

26 Item no- 26 Providing 15mm thick cement plaster 212.920 Sqm 176.58

in single coat on Rough (Similar) side of single or

half brick walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement: 3 sand) and finishing with a

floating coat of neat cement slurry.etc. complete.

27 Item no- 27 Providing 10 mm thick cement 104.420 Sqm 153.67

plaster in single coat on Ceiling / sofit of stair for

interior plastering finished even and smooth in (ii)

Cement mortar 1:3 (1-cement 3 - sand )for Ground

28 Item no- 28 Applying two coats of acrylic lappy 267.300 Sqm 119.82

(putty) and two coats of primer & Wall painting

( two coats) with plastic emulsion paint of

approved brand and manufacture on wall surfaces

to give an even brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

29 Item no- 29 20 mm thick sand faced cement plaster 277.000 Sqm 300.66

on walls upto 10 mt height above ground level

consisting of 12 mm. Thick backing coat of c.m. 1:3

(1 cement : 3 sand) and 8 mm. Thick finishing coat

of c.m. 1:1 (1 cement : 1 sand) etc. complete as

30 Item no- 30 Finishing wall with weather proof 277.000 Sqm 114.53

exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials etc

31 Item no- 31 Constructing a cooking platform 60 cm. 2.400 Rmt 2483.99

width and 70 cm high resting on B.B.Masonry walls

23 cm.thick in C.M. (1:6) with (i) Fixing or precast

R.C.C.1:2:4) 8 cm. thick slab with marble chips set

in C.M. (1:6) (6mm thick terrazo) with plastering on

exposed faces walls in C.M. (1:4) etc complete.

including the approved quality stainless steel sink of

size 600 X 400 X 150 including fixing the sink in

the stone platform with waste pipe and whole work

as per instruction of Engineer in charge.

32 Item no- 32 Providing laying and jointing in true 30.000 Rmt 72.65

line and level 15mm dia. U.P.V.C. Pipe ( SCH-40)

for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C

or shall be concealed as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

33 Item no- 33 Providing laying and jointing in true 40.000 Rmt 91.84

line and level 25mm dia. U.P.V.C. Pipe ( SCH-40)

for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C

or shall be concealed as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

34 Item no- 34 Providing laying and jointing in true 20.000 Rmt 119.15

line and level 32 mm dia. U.P.V.C. Pipe ( SCH-40)

for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C

or shall be concealed as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

35 Item no- 35 Provdg. & fixing gun metal check or 10.000 Each 420.63

nonreturn full way wheel valve. (C) 25 mm dia.

36 Item no- 36 Providing and fixing to wall ceiling 28.000 Rmt 277.43

floor 10 Kg. F/Cm2 working pressure polythene

pipes for soil waste and ventilating pipes of the

following outside dia. low density, complete

with necessary fittings ,wall clamps etc including

making good the wall ceiling and floor. (F) 75 mm

37 Item no- 37 Providing and fixing to wall ceiling 30.000 Rmt 336.24

floor 10 Kg. F/Cm2 working pressure polythene

pipes for soil waste and ventilating pipes of the

following outside dia. low density, complete

with necessary fittings ,wall clamps etc including

making good the wall ceiling and floor. (G)

38 Item no- 38 Providing and fixing PVC SWR Nahni 4.000 Each 571.08

Trap IS 14735 for drain - 100 mm diameter with jali

of the following nominal diameter of self cleansing

design with C.I. screwed down or hinged grating

including the cost of cutting and making good the

39 Item no- 39 Providing and fixing Screw down 4.000 Nos 214.81

Quarter turn bib taps of following size (A) Brass

chromium plated screw down Bib tap (Ii) 20 mm

40 Item no- 40 Providing and fixing wash basin with 4.000 Nos 2092.55

single hole for pillar tap with C.I. Or M.S.

brackets painted with including cutting holes and

making good the same including fittings, (fixing

C.P brass waste 32 mm dia),( fixing M.I. fisher

union 32 mm dia),(fixing pillar tap,cap stan head

screw down high pressure with screws, shank sand

back nuts. 15mm dia), (fixing brass screw down

stop tap15mm dia), (fixing Rubber plug) (A)

Vitreous China (ii) Flat back wash Basin 550mm

x 400mm size (i) in white colour

41 Item no- 41 Providing and fixing water closet 4.000 Nos 1535.97

squatting Pan (Indian type W.C.Pan) size 580mm

(A) Vitreous China.(I) Long pattern, White colour

including Providing and fixing(100mm size P or S

trap for water closet squatting pan including jointing

the trap with the pan and soil pipe in cement Mortar

1:1 (1-Cement : 1-Fine sand) (A) Vitreous

China.),(G.I. inlet connection for flush pipe with

W.C. Pan) (C.P. Brass 1/2 turn flush cock 25 mm

42 Item no- 42 Providing erecting and fixing 2000.000 Liter 3.95

double coated Syntex or equivalent PVC. (ISI)

mark water tank of required capacity each with

all necessary fittings & connection etc. comp on

43 Item no- 43 Providing and fixing S.W. Gully trap 2.000 Nos 1292.19

with C.I. Grating brick masonary chamber and

water tight C.I. Cover with frame of 300 mm. X

300 size (inside) with standard weight (I) Square

mouth traps (C) 100 mm. X 100 mm size P type

44 Item no- 44 Constructing brick masonary chamber 2.000 Nos 2932.93

for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal

dimensions, total weight of cover with frame to

be not less than 38 Kgs. weight of cover 23 Kg.

and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4

mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls & bed concrete etc.

complete. (I) inside dimensions, 455 mm. x

mm. And 450 mm. Deep for single pipe line.

45 Item no- 45 Constructing brick masonary chamber 2.000 Nos 3660.76

for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal

dimensions, total weight of cover with frame to

be not less than 38 Kgs. weight of cover 23 Kg.

and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4

mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls & bed concrete etc.

complete. [II] Inside dimensions 500 mm. x

mm. & 450 mm. deep for pipe lines one or two.

46 Item no- 46 Providing and constructing soak pit of 2.000 Nos 41305.11

size 2.46mt. outer and 6.0mt. deep including 23cm

thick brick masonary for top 0.75mt. height solid

masonary in cement mortar 1:6 and remaining

honey combed masonry in cement mortar 1:6 and

covered with jodhpuri patti C.I. pipe 100mm dia

1.8mt. long etc. comp. as directed including 15mm

plaster in C.M. 1:4 over jodhpuri patti.

47 Item no- 47 Providing and fixing 90 cm high 30.000 Rmt 3662.27

Stainless Steel railing made from anticorrosive

grade S.S. pipe of 50 mm dia (16 gauge) as hand rail

with S.S. 304 grade baluster of 32 mm dia (16

gauge) as a vertical support fixed in RCC slab / steps

of stair at 1.2 Mt. c/c including three horizontal S.S.

pipes of 16 mm dia (16 Gauge) at equal distance

fixed by 16 mm dia (16 Gauge) S.S. pipe with

baluster including accessories as per detailed

drawing as directed etc. complete.

48 Item no- 48 Construction of an under ground 4000.000 Litre 12.26

masonry water tank of size 2.00 m X 2.00 m X

m = 6000 litre capacity as per the approved drawing

& design etc. complete.

49 Item no- 49 Providing and fixing pre-cast Rubber 90.000 Smt 686.90

Dye/steel Dye interlocking concrete block 60 mm

thick with grade of concrete M300 pnumatic

compressed /vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35mm Sand layer for levelling and filling

the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

50 Item no- 50 Providing and laying cement concrete 1.560 Cum 3697.91

1:2:4 (1 Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

51 Item no- 51 (i) Half brick masonry in common brunt 10.920 Smt 599.84

clay building bricks having crushing strengthnot

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1

Cement: 4-coarse sand) in foundation and plinth

(B) Conventional

52 Item no- 52 Providing 15mm thick cement plaster 27.280 Smt 205.37

in single coat on brick /concrete walls for interior

plastering upto floor two level and finished even

and smooth in. (ii)Cement mortar 1:4 (1 cement:4-

sand ) with finishing in floating coat of neat cement

53 Item no- 53 Providing and laying cement concrete 2.880 Smt 351.56

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat

cement. (B) 50mm thick.

54 Item no- 54 Providing and laying in ground 110 mm 60.000 Rmt 334.08

diameter PVC rain Water pipe 6 Kg./ Sq.cm.

necessary fittings connection as per detailed

drawing as directed by Engineer - in - charge.

55 Item no- 55 Providing and laying in ground 150mm 20.000 Rmt 429.76

diameter PVC rain Water pipe 6 Kg./ Sq.cm.

necessary fittings connection as per detailed

drawing as directed by Engineer - in - charge.

56 Item no- 56 Brickwork using common burnt clay 3.100 Cum 4021.02

building bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6-fine sand) (B)

57 Item no- 57 Providing formwork of ordinary timber 2.400 Smt 173.40

planking so as to give a rough finish including

centering shuttering strutting and propping etc.

Height of propping and centering below supporting

floor to ceiling not exceeding 4M. and removal of

the same for in situ reinforced concrete and plain

concrete work in. (A) Foundations Footings Bases

of Columns etc. and Mass concrete.

58 Item no- 58 Supplying of crused stone aggregate of 0.400 Cum 661.90

25 to 40 mm size as directed with 5 Km. lead

59 Item no- 59 Supplying of coarse sand as directed 1.220 Cum 419.42

with 5 Km. lead

60 Item no- 60 Point wiring for Light / Fan/ Bell/ 30.000 No. 390.87

Primary Point with 2-1.5 sq. mm & earth wire of

sq. mm (green) both are of ISI marked 1.1 kv grade

FRLS PVC insulated multi strand copper wires upto

max length of 10 mt, in below type of pipe erected

with 6A Tissino Type ISI marked flush type switch

/ bell push and accessories erected on Metal / PVC

/Wooden Box covered with 3 mm thick PC (Poly

carbonate) /Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete (Elect S.O.R. P NO.

Item No. 1-1-1 (f)

61 Item no- 61 Providing & erecting Approved make 6.000 No. 2311.89

Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz 1200 mm sweep

complete having 3 blades aluminium body and

blade sets having ornamental design shanks

canopy erected with earthing. [ Make shall be

approved by Engineer in Charge] (Elect S.O.R P

NO. 123 item code 5-1-3)

62 Item no- 62 Supplying and erecting LED indoor 10.000 Ea. 295.93

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as

a heat sinks hallbe made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance

with diffuser with companymark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED LED driver efficiency > 85 % (

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED

fittings.TheEngineer inchargemayselect any

wattage capacity between the ranges shown.) (A)

Tube Light with integral driver. (iii) 18-20 Watts,

Surge-2KV,IP-20, conventional 4 feet (Elect. SOR

P.NO.56 It Code 2-15-1 Cat. III)

63 Item no- 63 Point wiring for independent PLUG 4.000 No. 347.44

with following size mains earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires upto 10 mt

length, in following below of pipe erected complete

with ISI marked 3 / 5 Pin socket and tissino type

switch erected with earth continuity connection

erected on Metal / PVC/Wooden box covered with

3 mm thick PC(Polycarbonate) / Acrylic/Laminated

sheet.[A] For 6 amp plug and 6 amp switch with 2-

1.5 sq. mm Cu. Mains from near by switchboard/ db

board upto 6 mt.(f) with medium class Rigid PVC

pipe and accessories erected concealed in

wall/ceiling complete (Elect S.O.R. P NO. 18 Item

64 Item no- 64 Providing & erecting 240 V MCB 2.000 No. 270.68

double pole switch for motor & inductive load (C

Curve) having 10 KA breaking capacity & confirms

to IS: 8828 in existing box having following

capacity(A) 6 to 32 Amp(Elect S.O.R. P NO.

Item No. 3-10-2 cat II)

65 Item no- 65 Providing and erecting Pipe type 2.000 No. 823.15

earthing with 40 mm dia 2.5 mtr long 'B' grade G.I.

pipe with necessary coupling buch buried in

specially prepared earth pit & G.I. earth wire of

SWG erected & connected as directed (For panel)

(Elect S.OR P NO. 95 Item No. 3-14-6-B)

66 Item no- 66 Providing & erecting open well 2.000 No. 10284.83

horizontal mono block pump set with cast iron

body, complete for three phase submersible motor

having SECTION 9-4 [A] For 1.5 HP 3 phase open

well horizontal mono block pump set suitable for

190 LPM @ 20 mtr head suitable for 40 mm dia

delivery pipe Catt-II (Elect S.OR P NO. 241 Item

67 Item no- 67 Providing and fixing 600 mm x 450 mm 2.000 Nos 833.73

bevelled edge mirror of superior glass mounted on

6 mm thick plywood sheet or PVC framing and

fixed to wooden plugs with C.P brass screw and

washers. {SOR. P No 177 It. Code. 23024}

68 Item no- 68 Providing and fixing C.P. brass towel 2.000 Nos 603.19

rail complet with C.P. brass brakets fixed to

wooden plugs with cpbrass screws ( B ) 600 mm X

20mm size {SOR. P No. 177 It. Code. 23025}

69 Item no- 69 Sheesham wood study Table and Chair. 2.000 No. 11992.74

Table dimension 34 inches length , 18 inches width

and 30 inches height. Primary material solid

sheesham woodand secondary material 15mm solid

MDF color teak finish style. (MR)

70 Item no- 70 2 Seater School Benches and Desks 10.000 No. 5095.45

(small) for childrens (MR)

71 Item no- 71 Furniture for Cup board 2.000 LS 20200.00

72 Item no- 72 Premium quality Kids Play school 2.000 Set 20042.44

indoor setup (1) Amazon basic junior BPA free

to score Giant premium plastic games set. (MR)

73 Item no- 73 Premium quality Kids Play school 2.000 Set 825.17

indoor setup (2) Jazz Drum set. (MR)

74 Item no- 74 Premium quality Kids Play school 2.000 Set 3584.49

indoor setup (3) Play rubber tiles. (MR)

75 Item no- 75 Premium quality Kids Play school 2.000 Set 607.01

indoor setup (4) Clapjoy slingo fastest finger first

76 Item no- 76 Premium quality Kids Play school 2.000 Set 7674.99

indoor setup (5) OK play see saw yellow/ green.

77 Item no- 77 Premium quality Kids Play school 2.000 Set 2513.89

indoor setup (6) OK play Rocker medium for kids,

boat ride on toy (MR)

78 Item no- 78 Premium quality Kids Play school 2.000 Set 619.13

indoor setup (7) Table tennis trainer (MR)

79 Item no- 79 Premium quality Kids Play school 2.000 Set 384.81

indoor setup (8) table tennis press button (MR)

80 Item no- 80 Premium quality Kids Play school 2.000 Set 4305.63

indoor setup (9) Dawnwake Baby play (MR)

81 Item no- 81 3D Wall painting (two coats)oainting 41.200 Sqm 1878.60

tech that creats the illusion of depth and dimention

on a flate surface wall art that can be use public

place3D model physical body using collection of

point in 3D space connected by various geometric

entities curve surface with plastic emulsion paint of

approved brand and manufacture on undecorated

wall surface to give an even draw a pictures and

writing a slogan releated of diffrent painting and

other theme based like harritage

painting,cleaness,plastic free city,save water, save

daughter,go green,clean city, etc.shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth etc.all material,scaffolding,

additional coats if required and labour or painter as

directed by Engineer in Charge . Method

Removing Dust from wall with use of wire brush

and sand paper . 2.Prepare surface with appying

exterior puty , cement slurry, or plastering which

one required for even surface. 3. Appying Base coat

of primmer 4. apply final even coat of colour

Draw line picture 6. pre detaling for painting 7. final

detailing of 3D painting 8. applying lacquer

protection coat on the whole painting area (make :-

Asian Paints, Burger, Nerolac. Equivalent brand as

approved by the authority. )

82 Item no-82 2D Wall painting (two coats) with 41.200 Sqm 1373.60

plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an

even draw a pictures and writing a slogan releated

of SWATCHHTA SURVEKSHAN Campain and

other theme based like a harritage,cleaness,plastic

free city,save water, save daughter,go green,clean

city,City importance etc.shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth

etc.all material,scaffolding, additional coats if

required and labour or painter as directed by

Engineer in Charge . Method 1. Removing Dust

from wall with use of wire brush and sand paper .

2.Prepare surface with appying exterior puty

cement slurry, or plastering which one required for

even surface. 3. Appying Base coat of primmer

apply final even coat of colour 5. Draw line picture

6. pre detaling for painting 7. final detailing of 2D

painting 8. applying lacquer protection coat on the

whole painting area (make :- Asian Paints, Burger,

Nerolac. Equivalent brand as approved by the

Rs. Twenty Six Lacs Twenty Four Thousand Five Hundred sixty Six & Paisa Forty Only

above/ below percent (Should be wrriten in figures and words) of the estimated rate mentioned above.

Amount of my/ our tender works out as under.

*Estimated Amount *Estimated Amount

(* Please strike out whichever is not applicable.)

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

GM\W v! ov AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Notes 2 - All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

GM\W vZ ov VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJL

Deputy Executive Engineer Executive Engineer

R & B Panchayat Sub Division R & B Panchayat Divisions

Sanand Ahmedabad