Loading…
Loading…
Tender Value
₹60.3 L
EMD Value
₹1.2 L
Closing Date
5 Aug 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SRDEEGTVC
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or "V" whichever is less where V= advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited , the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure -VI B, along with copies of Audited Balance sheet duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited balance sheet.
ii) For electrical works, the contractor should have a valid electrical contractor license from the concerned statutory authority of any state of India. The electrical license should be in the name of the firm's or in the name of any authorized person of the tenderers firm. It must be ensured that the validity of electrical license should be valid during the entire contract period duly renewing at appropriate time for extending validity. If the tenderer hired the electrical license, authorization of the same should be submitted.
13 conditions · 1 needing a document upload
All the tenderers/Contractors have to deposit full earnest money and tender document cost as stipulated for the tender, through online modes as permitted in IREPS application through multiple banks net banking, debit and credit cards . All documents related to Partnership deed/Joint venture/ Consortium/ MOU, duly signed by the notary public, should be uploaded failing which offer will be summarily rejected.
I/We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to- date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions of contract , General Instructions and conditions , explanatory notes of schedule of work and Annexures.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
Manual submission of EMD and cost of tender form cannot be entertained/Considered and hence no need of uploading the scanned copy of financial instruments
Whether GST registration available or not?
The contractor has to submit the EPF Code as per the EPFO Act and also has to submit a statement in this regard before signing the contract agreement.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The bidder has to fill in his quoted rate against each item in the Bid rate / Unit rate column. The bidding rate is Rs./ unit, the bidder has to quote his rate for the individual item only
Subsequent to the enforcement of GST Act, the modifications to Para-(a),clause 6, part I of Indian Railways Standard General condition of contract, July 2014 vide Railway Board letter No: 2017/CE/CT/4/GST(a) of 23/6/2017 is as detailed below: Clause No.6 - Care in submission of Tenders: (a)(i) Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer. (ii) Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017 (CGST)/ Integrated Goods and Services Tax Act, 2017 (IGST)/Union Territory Goods and Services Tax Act, 2017 (UTGST)/respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates. iii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to Railway immediately after the award of contract, without which no payment shall be release to the contractor. The contractor shall be responsible for deposition of applicable to the concerned authority. iv) In case the successful tenderer not able to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. The contractor is liable to pay the taxes as stipulated in the GST Act and Rules and also should furnish the details of GST to deduct from the contractor's bill.
Trivandrum Divn:Enhancement and Modernisation of Ollur and Nagercoil Goods shed - Electricalarrangements
V-EG-OT-15-2026-2027~SR
V-EG-OT-15-2026-2027
Open
Works - General
270 Days
Thiruvananthapuram, Kerala
₹0
₹1.2 L
5 Aug 2026
13 Jul 2026
22 Jul 2026
233 items across 7 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 12,86,638 | ||
| — | 400.00 | — | — | ||
| Supply & laying of HDPE pipe of 110 mm dia, pressure rating up to 4 PN (Material grade PE 63) conforming to IS 4984 /1995 in the excavated cable trench and threading of LTUG cable and termination of either ends with suitable size heat sinc sleeve (Cable will be supplied free, departmentally at TVC and transportaion will be provided by railway. Loaidng and un-loading operation has to be arranged by contractor). | — | — | — | 1,91,200 | |
| — | 800.00 | — | — | ||
| Supply & laying of HDPE pipe of 50 mm dia, pressure rating up to 4 PN (Material grade PE 63) conforming to IS 4984 /1995 in the excavated cable trench and threading of LTUG cable and termination of either ends with suitable size heat sinc sleeve(Cable will be supplied free, departmentally at TVC and transportaion will be provided by railway. Loaidng and un-loading operation has to be arranged by contractor). | — | — | — | 1,28,000 | |
| — | 1.00 | — | — | ||
| Supply and fixing and commissioning of IS/IEC certified 1 No. 160 A 36 KA 4P MCCB in metal enclosure (for fetching of supply with 120 sq mm cable) | — | — | — | 22,511 | |
| — | 10.00 | — | — | ||
| Supply & fixing of cast iron cable route indicator marked with " LT CABLE" including grouting with cement concrete | — | — | — | 5,300 | |
| — | 1.00 | — | — | ||
| Fabication, supply, erection and commissioning of Plinth mounted out door supply bunk fabricated out of 10 SWG MS sheet powder coated finish and fitted with (1) 1 No.160 A 4P 36 KA MCCB as in commer (2) 04 Nos. 63 A 4 P MCCB (3) 04 Nos 40 x6 mm copper bus bar (appx length 1.2 M each), door with locking arrangements including consturction of plinth as per the direction of Engineer in- charge | — | — | — | 1,95,037 | |
| — | 1.00 | — | — | ||
| Fabication, supply, erection and commissioning of in door type metal box of size 600 x 600 x 300 mm size fabricated out of 14 SWG CRCA sheet poweder coated finish and fitted with (1)1 No. 63 A 25 KA 4P MCCB, (2) three Nos. 32 A SP MCB & (3) 200 A 4 way connector ( fabricated with four Nos of brass/copper nut/bolt with washer fitted in 12 mm SMC sheet as cable connector including fixing hardware and locking arrangements. Provision has to be given for cable glands) (for goods loading PF light control ) | — | — | — | 23,630 | |
| — | 2.00 | — | — | ||
| — | 532.00 | — | — | ||
| — | 38.00 | — | — | ||
| — | 38.00 | — | — | ||
| — | — | — | 3,34,134 | ||
| — | 3.00 | — | — | ||
| — | — | — | 1,236 | ||
| — | 4.00 | — | — | ||
| — | — | — | 1,220 | ||
| — | 6.00 | — | — | ||
| Supply And fixing of cable gland suitable for LTUG cable 4 core x 25 Sq.mm and termination using aluminium socket duly crimped with suitabe size heat shrinkable sleeve. | — | — | — | 1,740 | |
| — | 6.00 | — | — | ||
| Supply And fixing of cable gland suitable for LTUG cable 4 core x 16 Sq.mm and termination using aluminium socket duly crimped with suitabe size heat shrinkable sleeve. | — | — | — | 1,560 | |
| — | 8.00 | — | — | ||
| Provision of earthing arrangements as per drg No.V/E.G. 362 and connecting with earthing terminals by means of 2 runs of 6 SWG G.I wire | — | — | — | 49,736 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .