Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.7 LAccepted-AOC NAMOPARA PURULIA | PURULIA | PURULIA | WEST BENGAL | 723101 | L1 | Accepted-AOC lowest | |
| 2 | L2₹47.5 L+₹82,970.72 (1.78%)Rejected-AOC 18 SANKAR BOSE ROAD KOLKATA | L2 | Rejected-AOC 2nd lowest | |
| 3 | L3₹48.0 L+₹1.4 L (2.96%)Rejected-Finance GARIKHANA BARAKAR ROAD PURULIA P S PURULIA TOWN DIST PURULIA PIN 723101 | PURULIA | PURULIA | WEST BENGAL | 723101 | L3 | Rejected-Finance 3rd lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
27 Jul 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply Delivery and installation of Submersible pumping machinery, MCC Panel, Voltage stabilizer, flow meter, ilumination arrangement with allied works for augmentation of Bathanbari PWSS under PMD PHE Dte.
2022_PHED_387703_1
07 / EE/PMD/PHED OF 2022-2023
Open Tender
MECHANICAL
Item Rate
60 days
Purulia
Please refer Tender documents.
6 documents required · 6 mandatory
₹90,000
Yes
22 Sept 2022
30 Jun 2022
29 Jul 2022
5 Jul 2022
27 Jul 2022
5 Jul 2022
Amount
PART A
Supply Delivery at site vertical bore well submersible pumping machinery directly couple with integral vertical hollow shaft submersible squirrel cage induction motor suitable for river bed tube well having power supply at 400+ 10%, 50Hz + 6%, 3Ph. with Capacity: Discharge: 25 M3/Hr. Head: 45 MTR. RPM: 2900 rpm. Material of construction Pump bowl housing: CI Pump and motor shaft: SS, Impeller:CS/SS, type of starter: DOL starter, Speed: 2900 rpm. Make: Texmo/KSB/PLUGA [Test certificate, MOC, curve chart & warrenty certificate must be submitted at the time of delivery] (Materials should be supplied after taking approval from department.)
Supply and delivery of 80mm dia CIDF Non Return valve Conforming to IS:5312, Part-1 (P.N.-1.0) Make: IVC/JUPITER/KBL
Supply and delivery and store at site of 4" dia flexible ruber hose pipe heavy duty (wire Embreaded) with T.D. flange in both side with clamps adapter and other necessary fitting including laying with clamp adaptorand flanges transportation and labour charges on floating walkway as per direction of EIC. Make: Diamond/Star) as per relevant IS. a. 2 mtr each
b. 3 mtr each
c. 6 mtr each
Supply of E.R.W.M.S.(Electrical Resistant Welded M.S.) as per IS:1239 (part I&II) 1.5m each with 4.85 mm thickness of 80mm dia, 5.4mm thickness of 100mm dia. and 100mm socket. a. 80mm dia.
b. 100mm dia.
Supplying, fitting and fixing in position G.I. pipes of for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials, jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately) A. 80 mm dia. medium quality
B. 100 mm dia. medium quality
Supply and fitting at site of 1.1 KV grade 2.5 sq.mm PVC insulated 3 core copper flat submersible cable. (Make-Finilex/Netco/Gloster/Polycab)
Supply of 50mm dia. PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS:1239(Part - I).
Supply and delivery of 100 mm x 50 mm MS clamp made of 5 mm thick and 24 mm width strip with nuts & bolts for holding 63 mm dia pipe as per direction and as per requirement.
Installation and laying with fitting fixing of above supplied Submersible pump motor sets with cable line & iron frame, E.R.W.M.S. pipe, flexible ruber hose pipe in rising main pipe line and supply, fiting fixing all necessary accessories, specials viz. MS flange, Bolt, Nut, gasket, welding by generator, etc. as per required and as per direction of EIC. Pipe with cable clamped with host pipe as per direction of EIC. and connection with existing rising main line to common header on barge and common header fixing on barge with satisfaction of EIC. (Any itmes or accessories not considered in the specification but required to complete the entire installation and operation shall have to be supplied and installed. No extra charge shall be provided for this purpose)
Supply and delivery at site 10 sq. mm, 3 core, 1.1 kv, XLPE insulated Ar. Al. conductor cable Confirming IS:7098. (Make-Gloster/Havells/Finolex/Polycab)
Laying of one No. cable 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per meter, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.
Supply and delivery at site alone front access type Kiosk panel 1.6mm thick and load bearing 2mm CRCA sheet enclosed outdoor floor mounted dust & vermin proof equivalent to IP-54 degree of protection CPRI approved , epoxy painted with all Neoprene gasket, cubical type with front lockable hinged door with FRP insulators, detachable gland plate at bottom & suitable for installation on cable trenches complete with 100Amp ¾ core cable terminal- 12 nos.with LED lamp-7 watt make philips and MCB inside the kiosk with necessary earthing protection, and danger marking & complete the works as per direction of EIC. Make-ECE/RNR industries.
Installation of above cable Kiosk at river bed side on masonary structure (0.5 mtr. Length X 0.5 mtr width X 2.5 mtr height size) by with 50 mm dia electrode -2 nos earthing with supplying earthing materials for the kiosk as per IE rule and 25 X 6 mm GI strip earhing connection with kiosk as per direction of EIC. Rate is including hire charge of Generator, welding set, fuels, lubricans & Gland to complete the job as per relevant IS and as per direction of EIC.
PART B
Supply delivery and commisioning & testing of MCC panel at site Supply & delivery at site alone front and rear lockabel hinged door access type MCC panel with compartment wise 1.6mm thick and load bearing 2mm CRCA sheet steel enclosed indoor floor mounted dust & vermin proof equinalent to IP-54 degree of protection CPRI approved, epoxy painted with all Neoprene gaskets, cubical type with front & rear lockable hinged door MCC with TPN electrolytic grade L.T. panel on FRP insulators, detachable gland plate at bottom & suitable for installation on cable trenches complete with Al bus bar of suitable size (1A/mm will be max.) with necessary earthing protection. (above 100A neutral bus bar should be same as phase) as per technical specification. Details specification as per SOQ
Installation and commissioning of above mentioned MCC panel by making required size masonary cable trench width 1.15 mtr and length as per MCC depth 0.75 mtr and necessary foundation complete brick work, plaster, planning, with supplying required no. compression gland, socket, cable lug, STEEL CHEQUERED PLATE -5mm thick, MCC load should bear by C channel 50mm x 100mm x 50mm on cable trench, length of C channel as per MCC as cross member length minimum 1.15 mtr as rtequired nos. 50 x 50 equal angle for CHEQUERED PLATE support, Earthing 50 mm x 6 mm GI stripe for earthing connection etc. by expert electrician and electrical supervisor to complete the job upto satisfaction of EIC. Includind all electrical connections to MCC panel with all pumps and from WBSEDCL meter. (MCC panel foundation should be make after taking foundation drawing approval from department.)(Any itmes or accessories not considered in the specification but required to complete the entire installation and operation shall have to be supplied and installed. No extra charge shall be provided for this purpose)
PART C
Supply delivery at site of one no AC microcontroller based servo controlled Automatic voltage stabilizer, 3ph, 50Hz in oil cooled construction, suitable for unbalaced input and load with 3servo motor for indoor use with the following specification :- IS981(I) (i) Maximum ambient temp- 45°C. (ii) input- 200-500V AC 3ph, 50Hz 4 Wire (iii) Output-415V + 1% 3ph, 50Hz (iv) Capacity-50KVA (v) Efficiency- >95% (vi) Oil Quantity as per manufacture standard to be supplied (IS335) (above unit must have U/V, O/V, O/L protection, I/P & O/P voltmeter, Amp meter, Buzzer with output MCCB and necessary with all acvillaries & auxiliaries.) Make :- AE/AEG/Sen & Pandit (Materials should be supplied after taking approval from department.) [Test certificate, warranty certificate to be produced at the time of delivery]
Supply and fitting at site of 1.1 KV grade 95 sq.mm PVC insulated armoured 4 core Aluminium conductors. (Cable supplied as per site requirement) (Make-Finilex/Netco/Gloster/Polycab)
Making a new C.C.foundation for installation of the above mentioned automatic voltage stabilizer with cable and with supplying the necessary electrical materials like 200 amp changeover switch and MCCB, busbar, and making 2 nos earthing pit with 50mm dia GI electrode as required to complete the installation
PART D
Supply delivery of 150 mm dia. Electromagnetic flow meter shall be Microprocessor based with advance diagnostic capabilities & HART communication protocal with have digital memory, and satisfactory of following specification a. For Sensor :- Principle of flow meter : Electro-Magnetic Induction, Type remote mounted, Lining material PTFE, Electrode material SS3116L, Grounding : 02 nos grounding electrodes, Empty pie Detection : Inbuilt, Coil housing Die-Cast Aluminium, Flange MOC/Rating : SS/Flange ANSI /ASME B16.5/16.47 series B class 150, Sensor Memory : Digital memory for all csalibratioin & configuration data, Sensor size 300mm length, Accuracy + 1.4% of the flow rate, IP-68 protection class, Medium temp. limit :0-80°C, Measurement of flow Bi-directional, Conductivity Required : >5 µs/cm, Installation condition : Upstream(10D) & Downstream(5D) (Straight Section), Accordig to EN 29104, Vibration level : 10-58 Hz range, Max. deflection 0.15 mm. Specification for Transmitter:- Display : fully configurable graphical LED with capacitive Touch keys, Output : 1 Current output (active or passive), 2 Digital output (Passive), HART, Calibration : Unique self calibrating transmitter (patented) for the ultimate stability and repeatability, Power Capacity : Universal switch mode power supply, DIP Switch : Three configuration DIP switchs are mounted on the transmitter backplane Board, Transmitter Housing : Powder - coated aluminium with glass window,single compartment , Protection class : NEMA 4X, IP-67, Power supply : 100~264 V AC, 50Hz Power supply through cvt, Cable length 10mtr, Cable entry " 1/2" NPTF, Language : English, Temp Limiptation : -20~60°C.
Supply delivery of CI specials per IS make Kejriwal. a) 150mm dia. (internal)
Supply delivery of MS dismantling joints PN 1.6 ratings with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts.
Installation and commisioning of above supply flow meter with all accessaries as MS dismantling joints, strainer etc and rate are also included for cutting pipe, welding charge, washer etc. as per requirement of site and all completed the works as per direction of EIC.
PART E
Supply and delivery at site 9mtr swagged type steel tubular poles(410SP-27) with double arm bracket made of 40mm dia 1mtr long PHED approve make.
Erection of single steel tubuler pole of lenth 9mtr with/without sole plate& cap etc in cc foundation,having 600x600x150mm thick cc(4:2:1)base block below sole plate/pole with hard jhama metal including CC(6:3:1)muffing 0.30mts dia and 0.30mts above ground ievel including 3mm thick neat cemented finish and GI earth bolt after making drilled holes etc on pole & carriage of pole upto 1.6km from store to worksite including filling up the excavated eaqrth pit with shifted soil and ramming properly. a. Upto 9.0mtr size-0.6x0.6x1.70 mtrs.
Extra on items1,for providing CC (6:3:1)base block around the pole dimension 0.60x0.60x0.76mt.above the ground level ,neatly cemented finished(3mm thick)at the base pole (in lieu of CC muffing )suitable for alkathene/polythene pipe entry as directed including S&F 25cm x25cmx10cm GI loop box, SWG& including drilled hole in pole.
Earthing with 50mm dia G.I pipe 3.64mm thick 3.04mtr long and 1 x 4 swg. G.I with (4mtrs long)13mm dia x 80mm long GI bolts, double nuts,double washers including supplying and fixing 15mm dia G.I pipe protection (1mtr long)to be fitted with bitumen and salt partly under the ground level and partly above the ground level driven to an average depth of 3.65mtr below the ground level and restoring the surface duly rammed.As per direction of EIC.double earthing to be done for each pole. By ISI- Medium GI Pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Supply and delivery at site 06 sq. mm, 4 core, XLPE insulated Armoured Aluminum conductor cable IS 7098 (part-1) for yard lighting. (Make-Gloster/Netco/Finolex/Polycab)
Supplying & fixing Compression type gland complete with brass gland,rubber rings for dust & moisture proof entry of PVC armoured cable as below. 4core 6sq mm.
Finishing the end of following Cable by Crimping method including supplying and fixing dowels make or equipment solder less socket tapes,anticorrosive paste& jointing materials. 4 CORE 6 SQ. MM
Laying of cable in underground trench upto 460mm x 760mm average depth with brick protection on the top of the cable with 8nos bricks per meter or as required including filling the space between the brick and cable and also the trench with shifted soil ,leveling up and restoring surface dully ramed.
Supplying and Drawing 1.1 KV single core 3 x 36/0.3 (2.5 sqmm) stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.
Supply fitting fixing LED street light luminaries(model BRP 409 74watt LED,make-philips)fitting complete with all fixing items on pole as per direction of EIC.
Supplying and fixing Sheet steel Main Switches of 32A on flat iron frame on wall 415V TPN & fuse. Make: Standard/Havells/HPL/L&T.
Supply & Delivery and fitting fixing of LED flood lighting luminarise as per BVP483 210 SPD type with high power LED and unic flood optics to ensure uniform distribution of light and maintenance free system, ideal for area lighting, high must, sports lighting and fixing on iron frame on intake wall. Make Philips
Add GST @ 12
M.S. ENTERPRISE
RABINDRA NATH KHAN
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .