PROVISION OF DEFICIENT MARRIED ACCOMMODATION AT NSTL VISAKHAPATNAM

Amount

Schedule 'A' Part - I (BUILDINGS AND STRUCTURES) This Schedule (contains under mentioned Sl. item No. 1.01 and 1.02) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for "Construction of block of type V quarter with stilt (for parking of two & four wheelers) and four floors in RCC framed construction, consisting of Two quarters in each floor with Servant Room, connecting main lobby, Verandah, staircase with Mumty Room (total 08 quarters, RCC water tank of 25000 litres capacity on terrace, with and including provision of lift well", complete all as shown on drawings and as specified. NOTE:- Provision of lift shall be measured and paid separately under resepctive items of the Schedule.

Lumpsum price worked out by the contractor for "Construction of Under Ground Sump of 50000 litre capacity", complete all as shown on drawings and as specified. Reference Drawing No. TD/S/445/2015, Sheet No1/1 dated 30 Oct 2015, Revised dated 10 Aug 2020.

Lump sum price worked out by the Contractor for "EXCAVATION, EARTHWORK AND SITE CLEARANCE” as listed in Schedule ‘A’ Part - II representing _______ % ________________ percent Above / Below the lumpsum price of `49,91,813.58, inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for “ROAD / PATH / CULVERT” as listed in Schedule ‘A’ Part - III representing _______ % ______________ percent Above / Below the lump sum price of `34,33,567.52 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part - IV representing __________ % ____________ percent Above / Below the lump sum price of `2,94,917.50 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part - V representing __________ % ____________ percent Above / Below the lump sum price of `9,31,907.70 inserted by the MES in Schedule ‘A’ Part - V

Lump sum price worked out by the Contractor for "COMPOUND WALL / CHAINLINK FENCING / GATE” as listed in Schedule ‘A’ Part - VI representing _______ % __________________ percent Above / Below the lump sum price of `2,97,751.55 inserted by the MES in Schedule ‘A’ Part - VI

Lump sum price worked out by the Contractor for “RETAINING WALL” as listed in Schedule ‘A’ Part - VII representing _______ % _________________ percent Above / Below the lump sum price of `31,13,317.20 inserted by the MES in Schedule ‘A’ Part - VII

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VIII representing _______ % _________________ percent Above / Below the lump sum price of `3,17,666.40 inserted by the MES in Schedule ‘A’ Part - VIII

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATIOIN” as listed in Schedule ‘A’ Part - IX representing ______ % _________________ percent Above / Below the lump sum price of `4,41,405.30 inserted by the MES in Schedule ‘A’ Part - IX

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - X representing ______ % _________________ percent Above / Below the lump sum price of `1,60,655.20 inserted by the MES in Schedule ‘A’ Part - X

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION, STREET LIGHTING, LIGHTNING PROTECTION AND ITEMS FOR DG SET & LIFT” as listed in Schedule ‘A’ Part - XI representing ______ % _________________ percent Above / Below the lump sum price of `11,45,392.17 inserted by the MES in Schedule ‘A’ Part - XI

Lump sum price worked out by the Contractor for “FIRE FIGHTING” as listed in Schedule ‘A’ Part - XII representing ______ % _________________ percent Above / Below the lump sum price of `13,00,050.40 inserted by the MES in Schedule ‘A’ Part - XII

Schedule 'A' Part - XIII This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 13.01 to 13.79

Supply, install, testing & commissioning of 13 Passengers (884 Kgs) Lifts in residential buildings suitable to serve G+04 upper floors with Regenerative AC variable voltage & variable frequency (VVVF) drive complete with all standard accessories, simplex collective automatic & manual dual controlled operation with / without attendant, automatic center opening doors with VVVF door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (03 Nos, one each in car, near Ground floor landing door and one with hand set in Machine room), complete all as specified (Please refer Appendix - A1 here-in-after) and directed.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.3mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth strip 32mm x 6mm by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 40mm dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover (1:2:4) mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- (a) Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. (b) Earth continuity conductor beyond 7.5metre shall be measured and paid under respective item of this Schedule.

Mirror polished black granite slab of thickness not less than 16mm, machine cut, set on vertical surface upto a height of 300mm all-around the lift facial elevation over and including provision of cement mortar backing coat of 15mm thick in CM 1:3, and jointed in cement slurry and pointed in white cement mixed with pigment to match with shade of granite slab for Lifts architrave at all floors, complete all as and directed.

DI (Ductile Iron) spun cast pipe, 100mm bore, ISI marked as per IS:8329-2000 (Pipes) / IS:9523-2000(fittings), IS:12288-1987 (laying), IS:2531-2009 (Jonting & testing) with latest ammendment up to date, duly cement mortar lining at inner surface and zinc coating with a bitumen finishing layer at external surface, class K-7 having nominal wall thickness 5.0mm and to with stand upto 40 kg / sq.cm with spigot & socketed ends including flexible push on joint , ISI marked or as per site requirment, laid in trenches / pass under the road etc., including carrying out testing against leakage, complete all as specified and directed. MAKE:- JINDAL SAW / ELECTROSTEEL / TATA DUCTURA

DI (Ductile Iron) spun cast pipe, 150mm bore, ISI marked as per IS:8329-2000 (Pipes) / IS:9523-2000(fittings), IS:12288-1987 (laying), IS:2531-2009 (Jonting & testing) with latest ammendment up to date, duly cement mortar lining at inner surface and zinc coating with a bitumen finishing layer at external surface, class K-7 having nominal wall thickness 5.0mm and to with stand upto 40 kg / sq.cm with spigot & socketed ends including flexible push on joint , ISI marked or as per site requirment, laid in trenches / pass under the road etc., including carrying out testing against leakage, complete all as specified and directed. MAKE:- JINDAL SAW / ELECTROSTEEL / TATA DUCTURA

Cutting of existing Ductile iron / cast iron pipes 200mm dia in position including excavation / earth work complete, taking of branch connection of 100mm by inserting with and including provision of Tee of 200mm x 200mm x 100mm including jointing as per site requirement, complete all as specified and directed.

Cutting of existing Ductile iron / cast iron pipes 150mm dia in position including excavation / earth work complete, taking of branch connection of 150mm by inserting with and including provision of Tee of 150mm x 150mm x 150mm including jointing as per site requirement, complete all as specified and directed.

Supply, installation, testing and commissioning of electric driven submersible pump set coupled with electric motor 415 Volt, AC, 3-Phase, 50 Hz, of capacity 5 HP, 1400 RPM, Head 40 metre suitable for open well including lowering into the open well with heavy grade column pipe of 50 mm dia each 3 metre long with submersible cable etc., complete all as specified and directed. NOTE:- (a) Particular model of pumpset with number of stagings of capacity 5 HP shall be approved by AGE(I) based on head and discharge characteristic curves as per manufacturers manual (b) Submersible cable, GI column tubing shall be measured and paid saparately under respective items of this Schedule. Rates quoted shall deemed to be inclusive of provision of T&P required for lowering of submersible pump cum motor. MAKE:- KIRLOSKAR / JYOTHI / CALAMA / TEXMO

Heavy duty socket 80mm long, 50mm dia for coupling of lower pipe, complete all as specified and directed.

Flat PVC Insulated and PVC sheathed industrial cable for submersible pump / motors 1100 V grade, 3 core, cross sectional area 4 sq.mm, complete all as specified and directed. MAKE:- FINOLEX / HAVELLS / GLOSTER

Supply, install, test and commissioning of LT panel board, out door type, floor mounted / pedestal type, cubical, compartmentalised, self supported, IS / IES 61439 1&2 rated fault of 65 KA / 1 Sec, front and rear openable, hinged type with locking arrangement on front and rear, suitable ventilations on both sides with wire mesh, IP-23 protection with dust and vermin proof, sloping top canopy etc., fabricated out of 3.15mm CRCA sheet duly powder coated with chemical process, mounted / fixed on and including MS angle iron stand / frame 400mm height from FFL, fabricated out of 50mm x 50mm x 6mm thick MS angles duly painted with black enamel synthetic paint over a coat of red oxide primer duly grouted in PCC 1:3:6 type C2 (40mm graded stone aggregate) foundation, control wiring with copper multi-stranded PVC insulated FRLS cables not less than 1.5sq.mm, suitable size / capacity of copper strips for switch gear connection from main bus bar, earth bus strip of suitable size for entire length of panel, suitable size of MS gland with gland plate and alluminium lugs / thimbles for all incoming / out going cables etc., complete with and including provision of and accommodating the following accessories, complete all as specified and directed.

Sl. Item No. 13.12 Contd… (a) MCCB 4 pole, 415 Volts, 40 Amps rating, rupturing capacity 16KA thermal magnetic release, adjustable over load and short circuit prptection - 01 Nos (In coming) (b) MCCB 4 pole, 415 Volts, 25 Amp rating, rupturing capacity 16KA, thermal magnetic release, adjustable over load and short circuit prptection - 03 Nos (02Nos Out going + 01No Spare) (c) Digital type multi functional panel meter 96sq.mm, Amps, Voltage, Frequency, PF & KWH with suitable CT's - 01 set (d) LED type Phase Indicator with controlling fuses for RYB - 02 sets (One set mounted on incoming compartment and 01 set mounted on each out going compartment) (e) Electrolyte Aluminium busbars TPN for phases and neutral 200Amp with PVC coloured sleeves mounted on hygroscopic insulator duly colour coaded RYB - 01 set (f) Automatic DOL starter with over load, no load, single phasing suitable for 5HP submersible pump cum motor assembly and 900 LPM discharge at 40metre head booster pump cum motor assembly (for fire fighting), AC, 415 V, 3 Phase, 50 Hz, alongwith push buttons start and stop onsurface duly colour coaded set in to the panel box including connecting by PVC copper conductor cable of size 4sq.mm x 4core - .-02 Nos.

Sl. Item No. 13.12 Contd… (g) The LT panel board shall be mounted by means of suitable bolts and nuts grouted into pedestals of size to suit the feeder pillar box made of PCC flyash brick masonry in CM 1:4, over PCC foundation of 100mm thickness in PCC 1:4:8, type D2 (40mm graded stone aggregate), PCC coping average 75mm thick in 1:3:6 type C1 (20mm graded stone aggregate), the exposed brick / concrete surfaces shall be rendered in CM 1:4, 10mm thick, finished fair and even and applied white wash three coats complete shall deemed to be included in qutoted rate. MAKE:- Makes of MCCBs shall be all as specified here-in-after MAKE of Panel board :- LOTUS POWER GEAR PVT LTD. / UNIVERSAL SWITCH GEAR CONTROL DELHI / TENCO SYSTEM AND SWITCH GEAR PVT LTD . INDORE / POWER SWITCH GEAR & CONTROL HYDERABAD / JAIHIND ELECTRICAL, AMBEGAON PUNE / VIDYUT TECHNOLOGIES INDIA PVT LTD, HYDERABAD / DYNAMIC CONTROL SYSTEM, AHMEDABAD

Cutting of bituminous road or PCC hardstanding upto 900mm deep and 300mm wide for laying of pipe line making good of the top surface upto 100mm depth to matching with the existing using PCC 1:2:4 type B1 (20mm graded stone aggregate), complete all as specified and directed.

DI specials suitable for spigot and socketed pipes of 100mm / 150mm dia, such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, complete all as specified and directed.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.3mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover (1:2:4) mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- (a) Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. (b) Earth continuity conductor beyond 7.5metre shall be measured and paid under respective item of this Schedule.

Supply, install, test and commissioning of LT panel board, out door type, floor mounted / pedestal type, cubical, compartmentalised, self supported, IS / IES 61439 1&2 rated fault of 65 KA / 1 Sec, front and rear openable, hinged type with locking arrangement on front and rear, suitable ventilations on both sides with wire mesh, IP-23 protection with dust and vermin proof, sloping top canopy etc., fabricated out of 3.15mm CRCA sheet duly powder coated with chemical process, mounted / fixed on and including MS angle iron stand / frame 400mm height from FFL, fabricated out of 50mm x 50mm x 6mm thick MS angles duly painted with black enamel synthetic paint over a coat of red oxide primer duly grouted in PCC 1:3:6 type C2 (40mm graded stone aggregate) foundation, control wiring with copper multi-stranded PVC insulated FRLS cables not less than 1.5sq.mm, suitable size / capacity of copper strips for switch gear connection from main bus bar, earth bus strip of suitable size for entire length of panel, suitable size of MS gland with gland plate and alluminium lugs / thimbles for all incoming / out going cables etc., complete with and including provision of and accommodating the following accessories, complete all as specified and directed.

Sl. Item No. 13.18 Contd… (a) MCCB 4 pole, 415 Volts, 400 Amps rating, rupturing capacity 16KA thermal magnetic release, adjustable over load and short circuit prptection - 01 No (In coming) (b) MCCB 4 pole, 415 Volts, 100 Amp rating, rupturing capacity 16KA, thermal magnetic release, adjustable over load and short circuit prptection - 05 Nos (02 Out going for DU block + 02 Nos WS panel, 01 No for DG set) MAKE:- Makes of MCCBs shall be all as specified here-in-after (c) Digital type multi functional panel meter 96sq.mm, Amps, Voltage, Frequency, PF & KWH with suitable CT's - 01 set (d) LED type Phase Indicator with controlling fuses for RYB - 02 sets (One set mounted on incoming compartment and 01 set mounted on each out going compartment) (e) Electrolyte Aluminium busbars TPN for phases and neutral 600Amp with PVC coloured sleeves mounted on hygroscopic insulator duly colour coaded RYB - 01 set MAKE of Panel board :- LOTUS POWER GEAR PVT LTD. / UNIVERSAL SWITCH GEAR CONTROL DELHI / TENCO SYSTEM AND SWITCH GEAR PVT LTD . INDORE / POWER SWITCH GEAR & CONTROL HYDERABAD / JAIHIND ELECTRICAL, AMBEGAON PUNE / VIDYUT TECHNOLOGIES INDIA PVT LTD, HYDERABAD / DYNAMIC CONTROL SYSTEM, AHMEDABAD

Supplying, installing, testing & commissioning of factory assembled Diesel Engine driven generating set coupled with alternator AC to give continuous output of 20 KVA at a power factor of 0.8 lagging, 415 V, AC, 3 phase, 4 wire, 50 HZ, 1500 RPM, directly coupled with diesel engine radiator cooled, mounted on common base frame complete with suitable fuel tank of suitable capacity with fuel line & accessories, PCC foundation work as per manufacture's instructions, AVM pads, micro processed relay based panel for automatic starting on mains failure, OEM recommended control panel showing all parameters of engine & alternator, sound proof canopy & other accessories etc. and confirming to the technical specifications ((Please refer Appendix - A2 here-in-after) complete all as specified and directed. MAKE:- Make of DG set shall be as specified here-in-after.

Supply, install, test and commissioning of LT panel board, out door type, floor mounted / pedestal type, cubical, compartmentalised, self supported, IS / IES 61439 1&2 rated fault of 65 KA / 1 Sec, front and rear openable, hinged type with locking arrangement on front and rear, suitable ventilations on both sides with wire mesh, IP-23 protection with dust and vermin proof, sloping top canopy etc., fabricated out of 3.15mm CRCA sheet duly powder coated with chemical process, mounted / fixed on and including MS angle iron stand / frame 400mm height from FFL, fabricated out of 50mm x 50mm x 6mm thick MS angles duly painted with black enamel synthetic paint over a coat of red oxide primer duly grouted in PCC 1:3:6 type C2 (40mm graded stone aggregate) foundation, control wiring with copper multi-stranded PVC insulated FRLS cables not less than 1.5sq.mm, suitable size / capacity of copper strips for switch gear connection from main bus bar, earth bus strip of suitable size for entire length of panel, suitable size of MS gland with gland plate and alluminium lugs / thimbles for all incoming / out going cables etc., complete with and including provision of and accommodating the following accessories, complete all as specified and directed. MAKE of Panel board :- LOTUS POWER GEAR PVT LTD. / UNIVERSAL SWITCH GEAR CONTROL DELHI / TENCO SYSTEM AND SWITCH GEAR PVT LTD . INDORE / POWER SWITCH GEAR & CONTROL HYDERABAD / JAIHIND ELECTRICAL, AMBEGAON PUNE / VIDYUT TECHNOLOGIES INDIA PVT LTD, HYDERABAD / DYNAMIC CONTROL SYSTEM, AHMEDABAD

Sl. Item No. 13.21 Contd… (a) MCCB 4 pole, 415 Volts, 100 Amps rating, rupturing capacity 16KA thermal magnetic release, adjustable over load and short circuit prptection - 01 No (In coming) (b) MCCB 4 pole, 415 Volts, 40 Amp rating, rupturing capacity 16KA, thermal magnetic release, adjustable over load and short circuit prptection - 04 Nos (02 Out going for lifts + 01 No WS pump, 01 No spare) (c) MCCB 4 pole, 415 Volts, 25 Amp rating, rupturing capacity 16KA, thermal magnetic release, adjustable over load and short circuit prptection - 02 Nos (02 Out going for fire fighting booster pujmps) (d) MCCB 4 pole, 415 Volts, 16 Amp rating, rupturing capacity 16KA, thermal magnetic release, adjustable over load and short circuit prptection - 02 Nos (Out going; 01 No for street lighting + 01 No for area lighting at DUs) MAKE:- Makes of MCCB shall be all as specified here-in-after (e) Digital type multi functional panel meter 96sq.mm, Amps, Voltage, Frequency, PF & KWH with suitable CT's - 01 set (f) LED type Phase Indicator with controlling fuses for RYB - 02 sets (One set mounted on incoming compartment and 01 set mounted on each out going compartment) (g) Electrolyte Aluminium busbars TPN for phases and neutral 200Amp with PVC coloured sleeves mounted on hygroscopic insulator duly colour coaded RYB - 01 set

PVC / fiber junction box pole mounted type with hinged door of size 180mm x 180mm x 150mm (outside dimensions) for 3 phase & neutral comprising of aluminium bus bar 200 Amp capacity mounted on hygroscopic insulators, 01 No MCB SP 6 Amp, PVC / fibre glass for incoming / outgoing cable with locking arrangement including fixing on street light poles with two Nos of MS flat iron clamps made by 25mm x 3mm fixed with nuts, bolts, with and including provision of painting with two coat of black bitumen paint over a coat of red oxide primer and making all required electrical connections, complete all as specified and directed. MAKE:- PVC / fibre junction box make shall be as approved by AGE(I).

LED street light fitting 45 W, High efficient, Aluminium pressure Die cast housing parts for longlife, pure polyester powder coated dark grey housing, High purity PMMA lenses for superior performance, Toughened glass with silicon gaskets for IP65 protection, Driver cover designed to suit top maintenance, suitable for external pole dia. upto 50 mm, Power factor > 0.95, Lumianire lumen output- 6440lm, CCCV driver with Voltage range 150-270V AC, Temperature range - 0 to 50 degree Celcius, Driver efficiency > 85%, Power factor > 0.95, THD < 10%, CRI > 70, Colour Temperature- 5700K, Surge protection from over voltages- 4.0KV in CM, 50000 burning hours, Luminaire efficacy > 92lm/W including provision of 0.5 sq.mm 3 core multistranded PVC copper conductor and PVC conduit with fixing accessories for connection between junction box and street light fitting, complete all as specifired and directed. MAKE:- Cat No LSTS-45-CDL-M of Crompton or techno-commercially equivalent model in WIPRO / PHILIPS / Jaguar

Street light bracket made out of 40mm dia GI tubing medium grade, of 1.5 metre long including bending, welding, drilling holes as required and fixing with flat iron clamps 50mm x 6 mm (02 Nos) with suitable nuts, bolts and washers to steel tubular / concrete poles complete, including preparation of steel and iron surfaces and applying two coat of aluminium paint, first quality, over a coat of primer, complete all as specified and directed.

Sheet metal enclosure with timer switch (Auto switching device operating on real time) digital type with minimum switching time of 1second, having wide range of switches week & day program with reserve 30 minute, including one MCB TP 20 Amps and one contactor three phase, 4 pole, AC control, 415 Volts, 20 Amps - 01 set, complete all as specified and directed. MAKE (Timer switch):-:GE / ABB / Siemens

GI pipe medium grade 40mm dia, 1.5 metre length including fixing arrangement with provision of welded base using MS plate of size 100mm x 100mm x 5mm, duly embedded in PCC block of 1:3:6 type C1 (20mm graded stone agregate) of size 200mm x 200mm x 200mmm for fixing of air termination rod, complete all as specified and directed.

Hose box, of suitable size for keeping two Nos hose pipe of length 15 metre each, branch pipe, nozzle, coupling etc., made out of MS Sheet of 2mm thickness, complete all as specified and directed.

CI air release valve suitable for 50mm bore CI pipe as per IS-14845, duly ISI marked, including fixing of all joints with rubber or fibre board, bolts and nuts, washers etc., complete all as specified and directed.

Supply, installing of ISI marked, ABC stored pressure type fire extinguisher of capacity 5Kg, portable type, consisting of mild steel body as per IS:513, mild steel neck ring as per IS: 2052, brass valve, body test pressure upto 30 kg /sq.cm, anti-corrosive treatment by epoxy polyster coating of 50 micron, jet length 2 metre, jet range minimum 6 metre, minimum discharge 85 minutes, expelling agent dry nitrogen conforming to IS:13849 suitable for 'B' and 'E' class fire, complete all as specified and directed. MAKE:- Hindustan Fire protection / Ceas fire / New tech / EXFLAME

Supply, installing of ISI marked, Carbon di-oxide fire extinguisher of capacity 4.5Kg, portable type, consisting of mild steel body as per IS:513, mild steel neck ring as per IS: 2052, brass valve, body test pressure upto 250 kg /sq.cm, anti-corrosive treatment by epoxy polyster coating of 50 micron, jet range 2.5 to 3 metre, working pressure 60-65 kg/sq.cm conforming to IS-2878 suitable for 'B' and 'C' class fire, complete all as specified and directed. MAKE:- Hindustan Fire protection / Ceas fire / New tech / EXFLAME

Fire extinguisgher ISI marked, mechanical foam (AFFF) type of capacity 9 litre manufactured out of CRCA plate of IS:513 grade conforming to IS :10204 and aproved by TAC, body coated with lead and tin alloy, having anti-corrossive treatment internally and externally by electrolytic deposition process, body tested at 25kg/sq.cm, fire red epoxy polyster powder coated comprising of AFFF in concentration of 6% and carbon di-oxide gas catridge jet range up to 6 metre suitable for 'B' class fire as per IS:2190 (such as petrol, oils, fats, paints, organic solvents etc), complete all as specified and directed. MAKE:- Hindustan Fire protection / Ceas fire / New tech / EXFLAME

All as per Sl. Item No. 13.34 here-in-before, but for ceiling fan / exhaust fan point controlled one number one-way switch

All as per Sl. Item No. 13.34 here-in-before, but for one light controlled by two two-way modular switches

All as per Sl. Item No. 13.34 here-in-before, but for one switch socket outlet point 5Amp and wall mounting fan on independent board

All as per Sl. Item No. 13.34 here-in-before, but for one switch socket outlet point 5Amp on same board

All as per Sl. Item No. 13.34 here-in-before, but for one belll point controlled by one modular bell push

All as per Sl. Item No. 13.41 here-in-before, but for ceiling fan / exhaust fan point controlled one number one-way switch

All as per Sl. Item No. 13.41 here-in-before, but for one light controlled by two two-way switches

All as per Sl. Item No. 13.41 here-in-before, but for one 3-pin socket outlet point 5Amp on independent board

MCB TPN 240V, 20 Amp - 32 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity complete all as specified and directed.

MCB SPN 240V, 16 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity complete all as specified and directed.

MCB SP 240V, 25 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity complete all as specified and directed

MCB SP 240V, 16 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity complete all as specified and directed.

MCB SP 240V, 10 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity complete all as specified and directed.

MCB SP 240V, 6 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity complete all as specified and directed.

Sub main wiring complete with four runs of single core 16 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of concealed non-metallic rigid PVC conduit of size not less than 32mm dia and its accessories and connecting terminal ends to DB's including providing two runs of 16 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) Four runs of 16 sq.mm copper conductor, two runs of 16 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with two runs of of single core, 2.5 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of concealed non-metallic rigid PVC conduit of size not less than 25mm dia and its accessories and connecting terminal ends to DB's including providing one run of 2.5 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. (for LT DB) NOTE:- (i) Two runs of 2.5 sq.mm copper conductor, one run of 2.5 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with two runs of of single core, 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of concealed non-metallic rigid PVC conduit 25mm dia and its accessories and connecting terminal ends to DB's including providing one run of 4 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. (for Geyser and inverter) NOTE:- (i) Two runs of 4 sq.mm copper conductor, oen run of 4 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with two runs of of single core, 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of concealed non-metallic rigid PVC conduit 25mm dia and its accessories and connecting terminal ends to DB's including providing one run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. (for AC) NOTE:- (i) Two runs of 6 sq.mm copper conductor, oen run of 6 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

AC Three phase static energy meter of accuracy class 1.0, 3 x 240 V, 50 Hz with Backlit LCD display of rating 5 - 20 Amp connected with sub-main copper wire including lugs through flexible PVC conduit from main control to meter, and shall be fixed in MS sheet box enclosure fixed on LT panel for each quarter independently having provision of opening at front covered with glass and protected by iron bus bar having locking arrangement, complete all as specified and directed.

Tamper proof single phase 230 V AC electronic energy meter of accuracy class I, digital type in polycarbonate body confirming to IS-13779 and CBIP technical report 88, of capacity 5-30 Amps having provision of opening at front covered with glass and protected by iron bus bar having locking arrangement, complete all as specified and directed.

LED surface & wall mounted batten, 4 feet, LED luminaires, 20 W, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50 degree Celsius, CRI > 80, class-1, SDCM < 5, Driver efficiency > 85%, Power factor > 0.95, THD < 10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level < 60V DC as per IS-10322 / IEC-60598 standard, IP20 protected, 50000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5sq.mm copper conductor for connection, complete all as specified and directed. MAKE:- Cat No. ENDURALINEARNEOBS20WLED840SPCWH of Havells or techno-commercially equivalent model in Phillips / Bajaj / CG

LED surface & wall mounted light fitting, 2 feet, LED batten luminaires, 10 W, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparalled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50 degree Celsium, CRI > 80, class-1, SDCM < 5, Driver efficiency > 85%, Power factor > 0.95, THD < 10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level < 60V DC as per IS-10322 / IEC-60598 standard, IP20 protected, 50000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy > 100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 sq.mm copper conductor for connection, complete all as specified and directed. MAKE:- Cat No-ENDURALINEARNEOBS10WLED865SPCWH of Havells / Cat No. LHEYAFP7PG1W010 of Philips or techno-comeercially equivalent model in Wipro / Bajaj / CG

LED Security light with aluminium pressure die-cast housing, high purity PC Fresnel diffuser with silicon gaskets for IP-65 protection, power consumption < 25W & luminaire lumen > 2500lm and system efficiency > 100lm/W, in built electronic driver prewired upto terminal block with driver efficiency > 85% power factor > 0.95, suitable for external pole/building upto 43mm, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class, CRI>70, ambient temperature range 0-450C, THD<10%, colour temperature 5700K, surge protection in CM-3.5KV, 50000 burning hours as per L70 criteria, multistage constant current-constant voltage operated driver with range 150-270V AC and safety extra low voltage safe level < 60V DC as per IEC Standard. MAKE:- Model No. LR02-291-XXX-57-XX of WIPRO or Model No. ENDURAPEARLSL25WLED757SASYTOPC of HAVELLS or techno-commercially equivalent model in BAJAJ / PHILIPS

LED bulb 10W, complete all as specified and directed.

LED surface & wall mounted light fitting, 1 foot, Mirror Light luminaires, 7 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparalled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50 degree Celsius, CRI > 80, class-1, SDCM < 5, Driver efficiency > 85%, Power factor > 0.95, THD < 10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level < 60V DC as per IS-10322/IEC-60598 standard, IP20 protected, 50000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 sq.mm copper conductor for connection, complete all as specified and directed. MAKE:- Cat No LCL-07-CDL of Crompton Greaves or techno-commercially equivalent model in Wipro / Jaguar / Havells

Ceiling fan BEE 5 star rated complete 1200mm sweep, energy efficient suitable to function on 230V, single phase, AC supply, white colour, with down rod 300mm long, capacitor 2.5mF, canopies, nuts, bolts and washers and connecting with and including provision of 3 core 1.5 sq.mm PVC sheathed flexible copper conductor from ceiling, writing MES number on ceiling fan motor complete all as specified and directed.

Heavy duty exhaust fan 300mm sweep 900RPM cast iron body and blades with louvers and shutters without regulator suitable for 230V single phase AC supply with all fixing arrangments to fix on wall, including making holes on brick / stone walls and making good disturbed surfaces to match with the existing, including provision of 3-way procelain connector, copper bunched flexible three core 1.5sq.mm PVC insulated cable from connection point to fan, writing MES number on exhaust fan motor, complete all as specified and directed

Heavy duty exhaust fan 225mm sweep 900RPM cast iron body and blades with louvers and shutters without regulator suitable for 230V single phase AC supply with all fixing arrangments to fix on wall, including making holes on brick / stone walls and making good disturbed surfaces to match with the existing, including provision of 3-way procelain connector, copper bunched flexible three core 1.5sq.mm PVC insulated cable from connection point to fan, writing MES number on exhaust fan motor, complete all as specified and directed

Air Circulator wall mounted fans 230 volts single phase oscillating 400mm sweep suitable for wall mounting ,oscillation up to 90 degrees and metal body poweder coated complete with all fixing accessories on wall, including provision of 3-way procelain connector, copper bunched flexible three core 1.5sq.mm PVC insulated cable from connection point to fan, writing MES number on fan motor, complete all as specified and directed

Telephone socket outlet RJ11 with shutter, clip-in type, including modular metal box with white cover plate with frame, complete all as specified and directed.

TV co-axial socket 1 gang, clip-in type, including modular metal box with white cover plate with frame, complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete including one double pole MCB 20 Amps (for AC), 50 Hz, 'C' curve, 10 KA breaking capacity complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete including one double pole MCB 16 Amps (for Geyser), 50 Hz, 'C' curve, 10 KA breaking capacity complete all as specified and directed.

Supply, installation, testing and commissioning of vertical type electric storage water heater of capacity 25 litre, BEE five star rated, 240 Volt, AC, 50Hz, comprising of heating element 2000 Watt, puf insulation, both power indicating LED lamp and heating indicating LED lamp, actual standing energy loss per 24 hours / 45°C temperature difference not to exceed 0.5KWH, re-heating time for 35°C temperature rise not to exceed 20minute, adjustable thermostat (temperature range in °C is 25-75±5), rated water pressure (N/sq.cm, water head (metre)) is 80/80, glass lined tank, glass coated heating element (to prevent water scale formation on element), temperature control knob, anode ord (to protect tank from corossive element), thermal cutout, safety valve (the safety valve shall be designed to automatically relieve pressure and discharge water in case the pressure overshoots the preset limits), with and including provision of necessary suitable 3-core copper cable, suitable plug top, PVC rigid pipes including brass nuts for hot and cold water connections, fixing of geyser on wall / surface with and including provison of suitable size of wall mouting bracket and 100mm length anchor bolts, including provision of all necessary plumbing work, civil works etc., complete all as specified and directed. MAKE:- AO Smith / Racold / Venus (Bajaj) / Havells

Design, manufacture, supplying, installing in correct aligned position, making proper connections, testing and commissioning of LV panel with and including provision of following accessories, suitable for 415V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor IP42 rating, free standing, floor / wall mounting, sheet metal clad, cubicle,dust and vermin proof type compartmentalized design fabricated out of 16 SWG CRCA sheet steel, complete with aluminium bus bars, separate earth bus bar to be provided through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a modular multitier arrangement and shall be interlocked to avoid paralleling, adequate size cable alley, painting, numbering, danger plate etc as required as per specifications and drawings. meter board shall be got approved by AGE(I) before installation, complete all as specified and directed. MAKE of Panel board :- LOTUS POWER GEAR PVT LTD. / UNIVERSAL SWITCH GEAR CONTROL DELHI / TENCO SYSTEM AND SWITCH GEAR PVT LTD . INDORE / POWER SWITCH GEAR & CONTROL HYDERABAD / JAIHIND ELECTRICAL, AMBEGAON PUNE / VIDYUT TECHNOLOGIES INDIA PVT LTD, HYDERABAD / DYNAMIC CONTROL SYSTEM, AHMEDABAD

Double wall corrugated pipe (DWC pipe) of 150mm internal dia, ISI marked, with and including provision of suitable size of collars for jointing of pipe, laid in trenches and jointed complete all as specified and directed. MAKE:- REX / POLYEXTRUSION / GEMINI or techno-commercially equivalent make as approved by GE

Double wall corrugated pipe (DWC pipe) of 200mm internal dia, ISI marked, with and including provision of suitable size of collars for jointing of pipe, laid in trenches and jointed complete all as specified and directed. MAKE:- REX / POLYEXTRUSION / GEMINI or techno-commercially equivalent make as approved by GE

Steel tubing, heavy grade, ISI marked, galvanised including short lengths, to be used as column pipe for lowering of mortor into sump, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 50mm bore of pipe, complete all as specified and directed.

Design, manufacture, supplying, installing in correct aligned position, making proper connections, testing and commissioning of LV panel suitable for 240 V, single phase power distribution system. The panel shall be Indoor IP42 rating, free standing, floor/wall mounting, sheet metal clad, cubicle,dust and vermin proof type compartmentalized design fabricated out of 16 SWG CRCA sheet steel to accomodate one MCB DB SPN 8way, complete all as specified and directed.

SVS PROJECTS

S V S ENTERPRISES

K KUMAR RAJA PROJECTS P LIMITED

GOPAL TEKNOCON PRIVATE LIMITED

anjaliinfratech

NARSINGH DEVELOPERS LLP

Venkateswara Electricals

BHARATSHAH CONSTRUCTION CO