Loading
Loading…
Loading…
Tender Value
₹4.5 Cr
EMD Value
₹3.7 L
Closing Date
18 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DYCEC III
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less crores; where V = Advertised value of the tender in crores of Rupees, N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderer(s) shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheets.
(a) The tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works , each costing not less than the amount equal to 40% of advertised value of each component of tender, or a One similar work, each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values for each component can also be considered for fulfillment of technical eligibility criteria. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than Rs. 2 crore each. The tenderer shall submit the completion certificate as per proforma given in Annexure-IV-A or IV-B or IV-C as applicable or in the format containing all information as required as per the Annexure-IV-A or IV-B or IV-C. Note :- Criteria for the completed work/substantially completed has been given in the General Instructions in the Standard Tender Document.
Defination of Similar Work :- Any bridge work
66 conditions · 8 needing a document upload
Mandatory in case Bid Security amount is prescribed in STD para 5.1.2 . The Bid Security shall be deposited in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- XXXII and shall be valid for a period of 90 days beyond the bid validity period.
The original Bank Guarantee should be delivered in person to the official nominated "Dy.Chief Engineer (Construction)-III, North-Western Railway, Opp. DRM Office, Harish Joshi Marg, Jodhpur"(Name and address to be filled before floating the tender by concerned field unit) as indicated in the tender document before closing date for submission of bids,(as per ACS No.5)
In case the tenderer is (i) Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' - shall be exempted from payment of Bid Security deposit and shall submit certified copy of the registration/ Valid document issued by DIPP (mandatory if applicable).
In case the tenderer is (iii) Labour Cooperative Societies - shall deposit only 50% of the Earnest Money / Bid Security Deposit and shall submit certified copy of the registration/ Valid document issued by the relevant Ministry/ Labour commission (mandatory if applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have read the various conditions to tender attached here to and agree to abide by the said conditions. I/We also agree to keep this tender open for acceptance for a period as mentioned in NIT header from the date fixed for opening the same and in default thereof, I/We will be liable for forfeiture of my/our "Bid security". I/We offer to do the work for North Western Railway, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within time period as mentioned in the NIT Header from the date of issue of letter of acceptance of the tender.
I/We also hereby agree to abide by the General Conditions of Contract-2022 corrected up-to-date and to carry out the work according to the Special Conditions of Contract and Indian Railways Unified Standard Specifications (Materials and Works)- 2021 as corrected up-to-date, Unified Standard Schedule of Rates of North-Western Railway-2021 as corrected up-to-date & C P W D DSR-2021 and Specification 2019 (for the present contract)
The minimum increment as mentioned in the clause no. 26.1 (b), Annexure C, Para 2 of the General Instructions of Standard Tender Document will be as per Railway Board guidelines or as approved by Tender Accepting Authority. (Applicable to the works and service tenders of value more than Rs. 50 crore).
T.No. DyCE-C-III-JU-T-5-RUB-PMY - Improvement of LHS by resurfacing of existing approach road, jacketing of RCC box and retaining walls, adequate drainage arrangement, covering shed and complete water proofing treatment including rain water harvesting with RCC wall etc. work of RUB No. 95-D at Km. 697/936, in Pali Marwar Station Yard of Luni-Marwar Jn. Section of Jodhpur Division.
DyCE-C-III-JU-T-5-RUB-PMY
DyCE-C-III-JU-T-5-RUB-PMY
Open
Works - General
4 Months
Jodhpur, Rajasthan
₹0
₹3.7 L
18 Mar 2026
21 Feb 2026
4 Mar 2026
55 items across 3 schedules · ₹3,37,62,221.55 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | In all conditions and classifications of soil except rock | cum | 1000.00 | 107.39 | 1,07,390 |
| 2 | 0m to 10m | Metre | 10.00 | 1,300.48 | 13,004.8 |
| 3 | Plate size 60cm x 60cm | Each | 1.00 | 29,920.3 | 29,920.3 |
| 4 | Taking out 100mm dia. & 450mm long undisturbed samples of soil from bore holes, including provision of air tight containers for packing and, labeling incl. transporting the samples to laboratory. Piston sampler shall be used for extracting undisturbed samples where necessary. Samples shall be collected as per IS:2720. | Each | 2.00 | 152.52 | 305.04 |
| 5 | Taking out 100mm dia. & 450mm long disturbed samples of soil from bore holes, including provision of air tight containers for packing, labeling and transporting the samples to laboratory. Samples shall be collected as per IS:2720. | Each | 5.00 | 164.57 | 822.85 |
| 6 | Conducting standard penetration test as per IS:2131 at approximate1.5m intervals in bore holes, as directed by the Engineer in charge | Each | 7.00 | 852.27 | 5,965.89 |
| 7 | Collection of water samples at required intervals | Each | 1.00 | 234.14 | 234.14 |
| 8 | Moisture Content/Dry Density | Each | 5.00 | 287.66 | 1,438.3 |
| 9 | Atterberg Limits | Each | 5.00 | 586.02 | 2,930.1 |
| 10 | Specific Gravity | Each | 5.00 | 631.51 | 3,157.55 |
| 11 | Grain size analysis including Hydrometer analysis | Each | 5.00 | 727.84 | 3,639.2 |
| 12 | Direct Shear Test | Each | 3.00 | 2,330.69 | 6,992.07 |
| 13 | Natural Density | Each | 5.00 | 674.32 | 3,371.6 |
| 14 | Consolidation Test | Each | 5.00 | 6,886.37 | 34,431.85 |
| 15 | Unconfined Compression Test | Each | 5.00 | 2,006.91 | 10,034.55 |
| 16 | Tri-axial Test | Each | 2.00 | 2,158.09 | 4,316.18 |
| 17 | All kinds of soils | cum | 500.00 | 210.9 | 1,05,450 |
| 18 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | cum | 18.75 | 2,845.47 | 53,352.56 |
| 19 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | cum | 230.00 | 2,936.59 | 6,75,415.7 |
| 20 | Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality in RCC raft foundation & Pile cap including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as p e r specifications and direction of the Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item. | cum | 367.50 | 2,919.59 | 10,72,949.33 |
| 21 | Wing wall and Return wall | cum | 150.00 | 2,999.09 | 4,49,863.5 |
| 22 | All types of bridge sub-structures, e.g. pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level | Sqm | 870.00 | 715.17 | 6,22,197.9 |
| 23 | Ordinary Portland Cement 43 grade approved brands/makes | MT | 220.00 | 7,801.51 | 17,16,332.2 |
| 24 | Pozzolana Portland Cement approved brands/makes | MT | 90.00 | 7,294.44 | 6,56,499.6 |
| 25 | Thermo-Mechanically Treated bars of grade Fe-500D or more of approved brands/makes. | Kg | 32500.00 | 107.01 | 34,77,825 |
| 26 | Supplying fabricating and erecting welded and/or bolted and/or riveted steel work in built up sections, trusses and framed work, staging, racks, Height Gauge etc. for Steel Structures other than bridge girders, using RSJ, tees, angles and channels/flats, plates, gussets, round or square bars, cleats, bolts etc., with contractors own steel including cutting, bending, straightening, drilling, riveting, hoisting, fixing, erecting, welding, bolting etc., with Providing stiffeners wherever required as per approved drawing including applying a priming coat of a approved steel primer with all contractor's materials, labour, tools & plants, lead & lift including crossing of tracks if required etc., complete as per specification and as directed by Engineer-in-charge. Note: The payment shall be made on the theoretical weight of main components and gusset plates only. | MT | 50.00 | 1,29,631.69 | 64,81,584.5 |
| 27 | Providing and laying of filter media consisting of granular materials of GW, GP, SW groups as per IS:1498 (latest) in required profile behind boulder filling of abutments, wing walls / return walls etc. above bed level with all labour and material complete job as per drawing and technical specification of RDSO Guidelines. | cum | 430.56 | 2,577 | 11,09,553.12 |
| 28 | Providing cast in situ bridge number plaques as per Railway drawing in cement concrete 1:2:4 mix using 20mm hard stone aggregate embedded in 30mm notch in Bridge parapet coping duly engraving the letter and figures and an arrow indicating the direction of flow and finishing the top exposed surface with cement mortar 1:3, painting letters and figures with two coats of black enamel paint on two coats of white background with all labour, tools, cement, paint etc. with all leads and lifts. | Each | 2.00 | 869.26 | 1,738.52 |
| 29 | Dewatering of natural or accumulated water from any location. Payment to be done for Horse power of pump multiplied by pumping hours. | HP Hour | 5000.00 | 44.73 | 2,23,650 |
| Schedule total | ₹1,68,74,366.35 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditionLHSRUBPMYrevised19022026latest.pdf Spl Condition
ATTACHMENT
MoUforwaterproofing.pdf
ATTACHMENT
DocumentMasterVer113_3.pdf
ATTACHMENT
11SafetyCirculars.pdf
ATTACHMENT
SpecialConditionLHSRUBPMYrevised19022026latest.pdf
ATTACHMENT
GCC2022updateduptoACS10.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .