Constructing CR @ Ch. 3080 mt of Hansot Branch Canal and HR VRB for Rayma Distry

Bill of Quantities

Name of Work :- Constructing CR @ Ch. 3080 mt of Hansot Branch Canal and HR VRB for

Qty. Unit Item Rate Per Amount

Dismentalling the existing stone masonry

including sorting out and stacking the useful

material sand removing the debries and

making good the damage etc. complete as

Dismentalling the existing foundation

concrete including deposing the dismentalled

stuff including sorting out and stacking

the useful materials and removing the

debries and making good the damage

etc.complete as directed.

37.00 CM (b) In cement concrete 1165.20 CM

Removing of existing disturbed C.C lining

including opening of joints, stacking the same

2128.50 Sqmt and disposing of stuff as directed etc. 29.10 Sqmt

complete with all leads and lifts.

Dismantling / Removing old damaged

structural steel including cutting seperating

2785.32 kg and stacking or depositingas directed etc.

Excavation for foundation in all sorts of soil

including yellow, sandy, gravelly soil, soft &

hard murrum, etc. dry condition including

depositing the excavated stuff in uniform

1412.00 m3 layers in banks or as directed etc. complete 81.50 m3

for lead uo to 1.0 Km and all lifts. (By

machinery) (a) Above water table.

Earthwork in embankment using soil, soft &

hard murrum excavated from approved

borrow area/village tanks etc.including

1575.00 m3 breaking clods, dressing to the design section 118.10 m3

with lead up to 5.0 kilometer and all

lifts. (By Poclane machinary)

Compaction of selected soil/hard murrum/soft

murrum in even thickness of 15 to 20 cms

including watering rolling of suitable capacity

1575.00 m3 etc. complete as directed. 10.40 m3

Providing and laying plain/ reinforced Design

Mix cement concrete of various grade with

cement, sand and coarse aggregates

including centering, shuttering, batching,

mixing, transporting, placing, vibrating,

smooth finishing, curing etc. complete for all

lead and lift.(Baching Plant Based, Including

479.00 CM M-10 grade (A) Foundation 3836.00 CM

M-15 grade. (C)Piers, abutment, wingwalls,

1090.00 CM headwall, returnwall etc. 4499.60 CM

M - 20 grade (C) Raft, Bottom slab of barel,

95.00 CM footing of columns, piers, abutment and 4796.10 CM

bottom slab of sump etc.

M- 25 grade (D) Raft, Bottom slab of barel,

footing of columns, piers, abutment and

62.00 CM bottom slab of sump etc.

M- 25 grade (E) Roadway slab, approch salb,

144.00 CM chute floor slab, kerb, piercap, abutment cap, 5206.30 CM

hoisting platform,top slab of barrel etc.

Providing and placing in position

reinforcement bars including cutting, bending

welding, joints where necessary, hooking etc.

232.00 Qtl complete as per drawing for all lead and lifts. 7194.00 Qtl

Providing and laying plain / reinforced cement

concrete lining of M-15 grade in bed, side

slopes and curvature including batching,

mixing, transporting placing, smooth finishing,

curing including dewatering where required.

( machinary based without Paver).

2129.00 m2 (C) 15 cm thick lining in Bed & slope 659.40 m2

Providing and fixing in position pre moulded

asphalt or bitumin cork board of approved

36.00 sqmt quality and specification as per design and 1007.40 sqmt

drawing as directed.

(D) 12mm thickness

Providing and fixing in position PVC heavy

duty water stops in barrels, trough, and wing

wall with 25 mm wide expension joint as

45.00 m shown in drawing including filling the joints 384.90 m

with asphalt pad or bitumins or cork board of

approved quality. (A) 225mm wide PVC

Providing and filling the polysulphide joint

selent of the approved make in the expansion

168.00 m and contraction joints in the c.c. lining 533.00 m

including clearing the joints with air water jet

Providing & fixing in position sign board of

standard size of 1.20mx0.90m with M.S angle

40mmx40mmx6mm with 3mm thick iron plate

including fixing in 1:5:10 prop. Concrete block

1.00 No. size 40cmx40cmx75 cm including painting 3011.30 No.

existing data on the board etc. complete as

Supplying of graded stone aggregates of

240.000 m 3 following size ( For W.B.M. road) H.B.Stone 262.48 m3

aggregates (i) 40 mm to 63 mm

Spreading the stone aggregate for Roling and

W.B.M. including filling the interstices forming

m3 the surface to rrquired camber & gradient m3

(excluding spreading of Blindage) (ii) 40 mm

to 63 mm size aggregates (H.B)

Providing gauge plate of following size of

material fibre glass reinforced plastic with

engraved bands width and figures with

necessary clits and fastenersand fixing the

6.00 No. same at the site of work etc complete 14786.61 No.

For 0.60 mt. x 1.0 mt. gauge patti

Type - A, "W" : Metal Beam CrashBarrier

(Providing and erecting a "W" metal beam

crash barrier comprising of 3 mm thick

corrugated sheet metal beam rail, 70 cm

above road/ground level, fixed on ISMC

series channel vertical post, 150 x 75 x 5 mm

spaced 2 m centre to centre, 1.8 m high,

72.00 mt. m below ground/road level, all steel parts and 3462.00 mt.

fitments to be galvanised by hot dip process,

all fittings to conform to IS:1367 and IS:1364,

metal beam rail to be fixed on the vertical

post with a spacer of channel section 150 x

75 x 5 mm, 330 mm long complete as per

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

186.00 sqmt thoroughly brushing the surface to remove all 120.2607 sqmt

dirt, and remains of loose powdered

materials.etc complete

providing and laying dry rubble pitching of

various thickness to required grade including

trimming of earth work, hand packing the

800.00 sqmt interstices with spauls, filling earth in 455.50 Sqmt

interstices pannelling completefor all leads

and lifts (a) 300 mm thick

Providing Videography on the ocassion of

function or for on going construction work

4 including dubbing, titeling etc. complete

1.00 including cost of casserre/CD 1230.51

(b) Up to 4.00 hours

Item No 1 (CR GATE)

Fabrication, Supply, Erection, Testing and

commissioning of Vertical Gate including

Hoisting Mechanism, GateLeaf, Embeded

parts with second stage concrete of CR CUM

VRB @3080M OF HANSOT with all

accessories, including cost of all materials,

1.00 Job machinery, labour, cutting,bending, aligning, 973654.00 Job

welding, finishing, cleaning, painting, seal

fixingetc., complete as per specifications and

approved drawings with all leads and lifts.

Gate Size 2.50 mt. X 1.75 mtr - (2 Nos )

Item No 1 (HR GATE)

Fabrication, Supply, Erection, Testing and

commissioning of Vertical Gate including

Hoisting Mechanism, GateLeaf, Embeded

parts with second stage concrete of CR CUM

VRB @3080M OF HANSOT with all

accessories, including cost of all materials,

1.00 Job machinery, labour, cutting,bending, aligning, 497357.00 Job

welding, finishing, cleaning, painting, seal

fixingetc., complete as per specifications and

approved drawings with all leads and lifts.

Gate Size 2.50 mt. X 1.60 mtr - (1 Nos )

Rs. One crore fourty three lacs sixty five thousand ninety two rupees and twelve paise only

Deputy Executive Engineer Executive Engineer

Ankleshwar Canal Sub Division U.R.B.C. Inv. Division

Ankleshwar Ankleshwar