Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.7 LAccepted-AOC 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC Lowest and reasonable bidder | |
| 2 | L2₹47.3 L+₹1.6 L (3.56%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹47.6 L+₹1.9 L (4.17%)Rejected-Finance | L3 | Rejected-Finance Not lowes |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
26 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) AMBALA
HQ CWE (AF) Ambala Ambala cantt 133001
PROVN OF SEWAGE LINE FROM SEWAGE WELL NO 02 TO GE UTILITY SEWAGE WELL AT RACE COURSE AREA UNDER GE (AF) AMBALA
2023_MES_603706_4
CWE/AF AMB/AMB-08/2023-24
Open Tender
Civil Works - Water Works
Item Rate
150 days
AMBALA CANTT
For MES enlisted contractor Class E Category a i and for un-enlisted contractor refer NIT
7 documents required · 7 mandatory
₹500
GE (AF) AMBALA
₹87,000
Yes
7 Nov 2023
5 Oct 2023
28 Oct 2023
5 Oct 2023
26 Oct 2023
12 Oct 2023
5 Oct 2023 - 7 Oct 2023
Amount
Excavation in trenches, not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth; for foundation, laying/taking out of pipes/cables etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan & not exceeding 1.5mtr in depth and getting out, in soft/loose type of soil complete all as specified & directed.
Returning, filling in including spreading leveling watering and well ramming in layers not exceeding 25cm thick each in soft / loose type of soil complete all as specified & directed.
Removal of excavated soil to a distance not exceeding 50 mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified & directed.
Supply, laying, testing & commissioning centrifugally cast (spun) ductile iron pipes of 150 mm dia laid as in trenches, pressure pipes water delivery with spigot & socket end, class 'K-9' conforming to IS:8329/2000 amended upto date, suitable for (push on) rubber gasket jointing with inside cement mortar lining with portland slag cement as per IS 455 :1989 and external metallic zinc coating as per IS:8329 with finishing layer of bitumen coating, duly ISI marked in any length including complete all as specified & directed.
Supply & jointing heavy duty (K-12) DI Bends upto 150mm bore (any type, radius and angle ), Tapers any type, (straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, Y junction, Double branch, Cross (all sockets or socket and spigot or all flanged or one end flanged and other ends spigot /socketed), Collars, Caps and Plugs, MJ collar coupling etc., conforming to IS 9523 - 2000 complete all as specified & directed.
Supply, fixing, testing & commissioning of Double flanged non-rising stem type cast iron sluice valve suitable for 150 mm dia/bore pipe with hand wheel and suitable for pressure rating of PN 1.6 duly drilled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked and conforming to IS 14846 - 2000 including rubber gasket, nuts, bolts and washers complete all as specified & directed.
Supply, fixing, testing & commissioning of Double flanged, cast Iron, swing check type reflux (Non Return) valve suitable for 150 mm dia/bore pipe, single door pattern conforming to IS : 5312 ( part -I ) 1969, duly drilled holes for fixing nuts and bolts including rubber gasket, nuts, bolts and washers etc. complete all as specified & directed.
Supply, installation, testing & commisioning of Non clog vertical submersible pumpset with CI impeller, non-clog to pass 40mm size particles including supply, installation with guide rail and lifting chain, testing complete, Capacity: 2000 LPM, head 18 mtr coupled with Motor dry type submersible and cooled by liquid being handled, (Motors are air tested for leakfree operation). Degree of protection for motor is IP-68 as per IS:2147, Class of insulation : F, Voltage : 415volt, Frequency : 50 Hz. including electrical connection with suitable rating of copper cables upto starter panel, protection device complete all as specified & directed.
Supply, installation, testing & commisioning of Non clog vertical submersible pumpset with CI impeller, non-clog to pass 40mm size particles including supply, installation with guide rail and lifting chain, testing complete, Capacity: 1000 LPM, head 27 mtr coupled with Motor dry type submersible and cooled by liquid being handled, (Motors are air tested for leakfree operation). Degree of protection for motor is IP-68 as per IS:2147, Class of insulation : F, Voltage : 415 volt, Frequency : 50 Hz. including electrical connection with suitable rating of copper cables upto starter panel, protection device complete all as specified & directed Notes for BOQ item No. 8.00 & 9.00 :- (a) Cable of appropriate rating upto length 12.0 mtr deemed to be included in quoted rate. (b) GI delivery pipe of suitable bore/dia as per Manufacturer's recommendation upto 7.5 mtr length is deemed to be included in quoted rates. (c) PCC foundation as per OEM specifications shall be measured & paid seperately. (d) After installation, functioning of submersibble pumpset alongwith starter panel shall be tested by rep of Accepting officer as & when requested by contractor through GE.
Supply, installation, testing & commisioning of starter panel non draw out type indoor installation with dust and vermin proof compartmentalized design single front construction , weld rivet, hinges threads shall be apparent from outside, powder coated panel IP-52 of size 1375mm x 1050mm x 350mm including copper busbar of 300 Amp three phase 4 wire SCADA compatible and comprising of following accessories complete all as specified & directed :- (A) INCOMING SECTION: (i) 160Amp, TP, MCCB 36 KA Micro processor base release - 01 No. (ii) RYB indication Lamps, 220 volt AC - 01 Set (iii) MFM Meter, EM-6436 - 01 No. (iv) Current Transformer, 150/5Amp, C1-1.0 - 01 Set (set of 03) (v) MCB-6Amp, SP - 3 Nos. (vi) Power Contactor, 60Amp, TP - 02 Nos. (vii) Mechanical Interlock for contactor - 01 No. (viii) Phase Sensor - 01 No. (ix) Water Level Controller - 01 No. (x) Auxilary Relay, 2 C/o - 02 Nos. (xi) On Delay Timer - 01 No. (xii) On Indication Lamps, 220volt AC - 01 No. (xiii) Start/Stop Push Button, 1No+1NC - 02 Nos. (xiv) Neutral link 32 Amp - 01 No.
M&L plain cement concrete (PCC) 1:3:6, type C-1, using 20mm graded mechanically crushed stone aggregate as in filling and mass concrete foundation/platform including necessary formwork complete all as specified & directed.
M&L earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of earth plate not less than 1.5 mtr below ground level, connected to GI earth lead strip 32mm x 6mm upto 7.5 mtr long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly & watering pipe GI 20 mm bore light grade 1.5 mtr long including protection pipe GI light grade 50mm bore upto 7.5 mtr long, wire mesh, funnel,lugs, salt, charcoal dust, excavation & earthwork in soft/losse soil and refilling pit chamber with PCC 1:2:4 type B1 using 20 mm graded mechnically crushed stone aggregates , RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates pit cover slab 50 mm thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both ways including necessary form work complete all as shown in electrical plate No 3 of SSR part-I, including testing on completion at site complete all as specified & directed. Notes:- (i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through Deviation order. (ii) On testing if the desired earth resistance is not obtained, earthing will be generated at No extra cost, till the desired earth resistance is obtained. (iii) The chamber shall be constructed atleast 1.5 mtr away from the earth electrode.
M&L boring of holes under road, pavement, taxi track, hardstanding for passing/crossing pipes/cables upto size 150mm dia/bore at suitable depth (not below than 600mm) by trenchless technology using ultra sounding technique and using necessary machinery / equipments complete without damaging the surface and removing excavated soil /material to a distance not exceeding 50mtr including supply & inserting GI pipe 150mm bore medium grade complete all as specified & directed. Note: One RM of boring & one RM of GI pipe shall be measured as one unit.
Supply, installation, testing & commissioning 3 phase and neutral, 415 volts factory made free standing, floor mounting, indoor type , dust and vermin proof cubical type, LT panel fabricated from 2mm thick(minimum) CRCA sheet with anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), fully compartmentalized design with 4 Nos of busbars made of high conductivity 99.9% pure copper of ETP grade suitable for 200 Amps pre-wired with suitable size of copper strip, short circuit rating 50KA (rms) for one second including suitable aluminium earth strips conforming to IS including following accessories complete all as specified & directed:- (A) INCOMING : (i) MCCB 125 Amp, 4 pole, ultimate breaking capacity 36KA draw out type with Microprocessor based protection unit , 415volt with rotary handle - 01 No. (ii) Digital Multifunctional Panel meter of size 96mm X 96mm (parameter 3 line display) and three current transformer of suitable ratio and capacity. (B) OUTGOING : (i) MCCB 100 Amps, 3 pole, ultimate breaking capacity 25KA with electronic releases suitable for 415volt with Rotary handle - 02 Nos. (ii) On load changeover switch 4 pole, 125 Amp, 415volt with Rotary handle - 01 No.
Notes for item No. 14.00 :- (i) The panel have interconnection of main Busbar and outgoing bus Bar . The cubical shall have bottom channel of Size 75mm x 40mm duly coated with Zinc metal including PCC foundation work . The panel shall be powder coated after seven tank treatment . (ii) Layout diagram of LT panel shall be produced by contractor for approval of Accepting Officer through GE before placing order to manufacturer and panel shall be brought at site as per approved drawing. The cost of same is deemed to be included quoted rates.
Supply, laying, jointing, testing & commissioning of LT electric cable, 1100 Volts grade, heavy duty, XLPE insulated, armoured electric power cable with aluminium conductor of cross sectional area 95sqmm, 3.5 core conforming to IS- 7098 (Part I) 1988 laid as in trenches or fixed along the wall/pole or passing through pipes/ducts etc, complete all as specified & directed.
Supply, laying, jointing, testing & commissioning of LT electric cable, 1100 Volts grade, heavy duty, XLPE insulated, armoured electric power cable with aluminium conductor of cross sectional area 50sqmm, 3.5 core conforming to IS- 7098 (Part I) 1988 laid as in trenches or fixed along the wall/pole or passing through pipes/ducts etc, complete all as specified & directed.
Supply, Installation, testing & commissioning of silent diesel engine driven generating set, 415volt, 3 phase, 4 wire, Engine comfirming to IS 10002/BS 5514 and Alternator comfirming to IS 13364 of capacity rating 62.50 KVA at 0.8 PF with sound proof canopy made and fabricated of 1.6 mm thick of CRCA sheet , powder coated with specially designed lifting hooks, meet the latest government norms CPCB II norms of 75 decibal at 1.0 mtr distance, including PCC foundation as per manufacturer's drawing complete all as specified & directed and comprising of following:- (a) Engine: Multicylinder, water cooled, four stroke, diesel engine for 62.50 KVA with sensor for low oil pressure, high water temprature including microprocessor based engine control panel , 12volt DC start system with battery and fuel tank for 8 hour run. (b) Alternator: Alternator of rated capacity 62.50 KVA at 1500 RPM, 0.8 lagging PF, 415 volts, 3 phase, 4 wire, self excited, self regulated and AVR with +- 1% voltage regulation, class H insulation. (c) Base Frame: Common iron channel fabricated base frame containing the engine & alternator mounted on AVM and having provision of lifting hook. (d) Cubical type, control panel with hinged door, with copper busbar, 200 amp, 3 phase 4 wire system, made of CRCA sheet of 2mm thick with epoxy paint after 7 tank pretreatment process and comprising of following:-
S&F cable route indicator made of mild steel plate of size 75mm x 60mm, 6mm thick fixed/welded on angle iron of size 40mm x 40mm x 4mm, 600mm long, duly painted with one coat of primer of zinc oxide paint and finished with two coats of synthetic enamel paint and wirting of cable details as directed by Engineer-in-charge, grouted in PCC 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregates block of size 300 mm x 300mm x300mm in foundation including necessary form work complete all as specified & directed. Note: Earthwork, PCC & formwork is deemed to be included in quoted rates.
M&L double wall corrugated (DWC) HDPE pipe outer dia 90mm & inner dia 75mm confirming to IS 4984 with end cap as in trenches/under road/under floor including cutting road/floor and making good wherever necessary or fixed to wall/pole with fixing arrangement with suitable size of MS clamps made from 40mm x 3mm size flat iron including nuts, bolts & washers for cable protection complete all as specified & directed. Note: Excavation for trenches shall be measured & paid seperately. The working/installation shall be confirming to IS 14930
S&F rolled mild steel works as in supports, clamps and back plate frabricatied from structural steel sections confirming to Fe 410-W(Gde-E- 250) quality-A including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size complete all as specified & directed. Note: The steel work shall be painted with two coat of synthetic enamel paint over & including one coat of red oxide primer after preparation of surface.
Gupta Enterprises
M/s Kang Builders & Developers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .