Items for networking

Item with specification

Wireless Access Point - MIMO The APs should support the IEEE 802/11a/b/g/n/ac/ax with dual radio capabilities conforming to Wi-Fi 6 standard. The AP should support 4x4:4 MIMO on 5Ghz and 2x2 on 2.4Ghz radio. It should support minimum 2400 Mbps data rates on 5 GHz and minimum 570 Mbps or more data rates on 2.4GHz. The AP shall have One 2.5Gbps Ethernet port and one 1GbpsEthernet port. Should support Internet-of-Things (IoT) technologies such as Bluetooth Low Energy (BLE) smart beacons, ZIGBEE etc. The access points should be centrally managed as well have the capacity to work as a virtual controller managing other access points. The minimum number of resource units (OFDMA) supported should be 37 or more. The access point should be able to operate in full MIMO mode and the necessary power POE/POE+/uPOE/POH should be provided. Security mechanisms should be in place to protect the communication between the Access Point controller and the Access Points. The AP should have an option to be powered up through DC power in addition to POE. Device should be UL 2043 Plenum Rated. The AP should have a receive sensitivity of -96dBm. The AP should provide an antenna gain of minimum 3dBi on both the bands. The AP should support 20, 40, 80, 160/80+80MHz channelization. The access point should be able to detect clients that have dual band capability and automatically steer those client to use the 5GHz band instead of the 2.4GHz band. The AP should provide minimum Tx Power of 23dBm on both the bands The access point should support 802.1q VLAN tagging The access point should support WPA-PSK, WPA-TKIP, WPA2 AES, WPA3, 802.11i security. The Access Point should provide for concurrent support for high definition IP Video, Voice and Data application. The Access Point should support WMM, Power Save, Tx Beamforming,802.11r/k/v. The AP should have the capability to support minimum 20 BSSID Should support 512 or more clients per AP. Should support IPv6 dual stack The Access Point should support mesh configuration either directly or through the controller. The Access Point should support rate limiting, application recognition and control, Access Control lists and device fingerprinting. Should be plenum rated and comply to RoHS Should be Wi-Fi certified and WPC approved. Mechanism for physical device locking using padlock /Kensington lock / equivalent AP should be quoted with 24/7 TAC Support and Warranty for 3 years with NBD Hardware Replacement.

Networking with the following components and specification3(1) :CAT 6 UTP Cable 23 AWG Annealed bare solid copper, CAT-6 UTP Cable Type Of Conductors: 4 pair 23 AWG Conductors and star separator. Cable Pull Tension Thread & FR Grade PVC Jacket : Fire Retardant PVC Frequency : Characterized to 600 MHz Standard length: 305 Mtrs (1000 ft.)

3(2) :24 Port Managed Switch Switching Ports • 24nos X 10/100/1000 MBPS ports • 2 X Combo GE ports • 2 X 1G/5G SFP Switching - 41.67MPPS performance capacity, 72GBPS Switching, Non-blocking - Spanning Tree Protocol Standard 802.1d Spanning Tree Support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP). 16 instances are supported - Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Up to 32 groups - Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad LAG - VLAN Support for up to 4096 VLANs simultaneously Port-based and 802.1Q tag-based VLANs MAC- based VLAN Management VLAN PVE (Private VLAN Edge), also known as Protected Port, with multiple uplinks Guest VLAN Unauthenticated VLAN Protocol-based VLAN CPE VLAN Dynamic VLAN assignment via Radius server along with 802.1x client authentication Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Auto voice capabilities deliver network-wide zero touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR). Q-in-Q VLANs transparently cross over a service provider network while isolating traffic among customers. GVRP/GARP Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or port faults to prevent forwarding loops and black holing of traffic in switched networks DHCP Relay at Layer 2 Relay of DHCP traffic to DHCP server in a different VLAN. Works with DHCP Option 82 IGMP (versions 1, 2, and 3) snooping Internet Group Management Protocol (IGMP) limits Bandwidth-intensive multicast traffic to only the requesters; supports 1K (1024) and 4K (for SG500X in native mode) multicast groups (source-specific multicasting is also supported). IGMP querierIGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router HOL blocking Head-of-line (HOL) blocking, Jumbo Frames up to 9K (9216) bytes in length 3 years onsite warranty from manufacturer

3(3) :8 Port Unmanaged Switch Standards - IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet Cabling type - Category 5e or better Ports - 8 RJ-45 connectors for 10BASE-T/100BASE-TX or higher Switching Capacity : 1.6 Gbps or higher Forwarding rate: 1.4. mpps or better Power cord/power adapter & Mounting hardware 3 Years Warranty

3(4): 6 CORE MM Fiber Cable, Outdoor LT Armored, OM3 – aerial cable laying with stay wire.

3(5) : MM LC Pig tail Duplex. OM3

3(6) : CAT 6 Patch Cord 1m

3(7) :LU-1G-MM-DX-LC 1 GB MM Fibre Duplex SFP Module 1 Gigabit bi-directional performance Multi-mode Mini GBIC module operates at 850nm Three year Warranty

3(8): CAT 6 UTP Cable laying (against actuals)

CROSSGEN TECHNOLOGIES

DBRAINS INFO SYSTEMS & CONTROLS PRIVATE LIMITED