Supplying Installation Testing and Commissioning of Public Address System in the Medicine Building of AGMC GBP Hospital Agartala Tripura W 2nd call

SITC of 10 Zone Remote Call Station with gooseneck microphone, LED display, keypad operation, microphone volume control, supporting RS-422 communication through RJ-45 interface, frequency response of 100Hz–15kHz (MIC) and 30Hz–18kHz (Line), operating on 24V DC supply having adapter with maximum power consumption of 10W all accessories complete as required & as directed by the Engineer-in-Charge :-

Supplying & laying of Cat-6 UTP LAN FRLS Cable conforming to ANSI/TIA-568 standards, including routing through existing/new PVC conduit/trunking, dressing, termination at RJ-45 I/O and patch panel, ferruling, labeling, testing and all accessories complete as required:-

Supply, installation, testing and commissioning of 500W Digital Class-D Power Amplifier for Public Address (PA) System, suitable for continuous duty operation, having minimum 500W RMS output power with minimum 85% efficiency, 100V line and 8 Ohm speaker outputs, balanced line input with gain control, frequency response of 20Hz–20kHz, THD: <0.1% (1KHz/-3dBv, 100W), Signal-to-Noise Ratio > 80dB, input impedance of 10kΩ, built-in high-pass filter (ON/OFF), LED indications for Power, Protection, Clip, Input and Output status, and complete protection against short circuit, overload, over-temperature, clipping and DC faults, suitable for operation on 230V AC, 50Hz required for satisfactory operation, complete as required as directed by the Engineer-in-Charge:-

Supplying and fixing of RJ-45 Connectors including connection etc as reqd:-

Supply, installation, testing and commissioning of 10 Zone Controller for Public Address (PA) System, expandable up to 300 zones through cascading, complete with 10 independent paging channel selectors, MIC-1 & MIC-2 inputs (600Ω, 5mV, unbalanced), Line-1 & Line-2 inputs (10kΩ, 775mV, unbalanced), audio output, 10-zone selector switches with LED indications, RS-422 communication interface with RJ-45 communication ports, DIP switch ID addressing, and frequency response of 100Hz–15kHz (MIC) and 30Hz–18kHz (Line), Signal-to-Noise Ratio of minimum 60dB (MIC) and 80dB (Line), Operation: 110–230V AC, 50/60Hz, maximum power consumption of 40W, complete with necessary connection and as per the directions of the Engineer-in-Charge:

Supplying & fixing of 2×1.5 Sq.mm (16 AWG) Speaker Cable, made of high-conductivity stranded electrolytic annealed copper conductors with PVC insulation and overall FR/FRLS PVC sheath, conforming to relevant IS/IEC standards with necessary connection etc as required & as directed by the Engineer-in-Charge:-

Supplying, installation, testing and commissioning of 6 W Box On Wall Speaker built-in 70V/100V line matching transformer, Impedance 6W-1.7kOhms, 10-1.1 kOhms, minimum sensitivity of 96dB, frequency response of 120Hz–16kHz including connection etc as reqd & as per the directions of the Engineer-in-Charge:-

SITC of 9U wall-mounted network rack with glass front door, adjustable rails, fan unit, pdu, cable manager and complete mounting hardware including connection etc as reqd:-

Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:-