REPAIR AND MAINTENANCE TO VEHICLE EICHER BA No 13D-191384A AT AGE (I) AF BHJOWALI .

Amount

Taking down care fully the wheel front and rear assy complete from the veh and checking the defects,cleaning of wheel axle,and wheel bearing with K oil and reassembling the same after replacement of worn out nut bolts,etc.with hub greasing complete,all as directed.(a) oil seal hub front wheel -2 Nos(b) oil seal hub Inner -2 Nos(c) nut bolt set -1set (d) K-Oil- 5Ltrs(e)Grease - 2 Kgs (Each -02 Nos).

Repair and Replacing of old unserviceable break shoes,tension spring wheel cylinder cylender cap etc. front and rear wheel including reassembling complete all as directed.

material and labour for complete alignment with computerised of front and rear wheels including replacement wheel cylender kit,complete(Each set -02 Nos)

Repair of fuel injector pump of with the replacement of under metioned items and re-assemble the same with proper functioning and testing as directed.

(a) Pump Nozzle

(b) Pump Adj washers

(c) Pump plunger

(d) Pump Control rod

Material and labour for complete denting painting and welding work of veh where required which are appearing during continiouse use of veh.

M& L for Dismantling of deisel tank from veh and cleaning for removing accumulated sludge and refixing it in its own posittion with connection complete all as directed

Dismantling the shock absorber and replace the old shock absorber with new one complete-02 Nos

Repair replacement of old wiring of the veh complete with replacement of worn out items,like ,plug socket-04 Nos,Relay -02,horn-1,wiring set -1 Nos

Dismanteling of self starter 12 volt servicing the same including replacement of the unserviceable worn out carbon bushes of any and refixing after repair including tesing etc.complete all as directed.

M&L for taking out defective accelator cable from veh and replacement with new genuine accelator cable complete all as directed.

Taking down/dismanteling of alternator from its own position and cleaning/washing,repaing and refixing same to veh after replacement of under mentioned items:-

(a) alternator bearing

(b) alternator cut out

(c) alternator plate

(d) oil seal

M& L for dismantling silencer assy complete and replacement of seal packing of silencer and welding work for the veh where required with gas weling as directed.

Dismanteling of break master cylinder from veh and refixing with new genuine quality break master cylinder kit complete all as directed.

Replacement of the existing burnt oil and filters with following under mentioned items

(a) Air Filter

(b) Oil Filter

(c) Fuel filter

(d) Engine/lubricant oil (40W)

Dismantling the radiator cleaning of piping , replacement of hose pipe with clip,refixing the same topup of coolant .

(a) Hose Pipe with clip

(b) Coolant

M/s J P Traders (BID ID -3266322)

NK CONSTRUCTION (BID ID -3269261)