REPAIRS TO JOINERY FALSE CEILING BOARDS MS SHUTTERS IN CERTAIN BUILDINGS IN ZONE D AREA UNDER AGE BR (N) NO I OF GE (NORTH) SECUNDERABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 Sqm and not exc 4.00 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantcomplete all as specified and as directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as directed by Eng-in-charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed

S & F 105 x 60mm pressed steel frame of size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

S&F MS works as in Bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging james and similar small articles Fe-290 Gde -E-165 complete all as specifed and directed.

M&L Preparation of wood surface, treating the back of chowkhat, end of post etc area tarred exceeding 0.1 Sqm but not exc 0.5 Sqm each etc completed all as specified and directed.

M&L Treating small articles such as hold fasts, ends of posts, backs of chowkats etc area n.exc 10Sqm each etc completed all as specified and directed.

M&L Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 depth of embeded portion exc half brick & N.exc one brick etc completed all as specified and directed by Engr-in-Charge.

M&L Providing PCC (1:2:4), type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats,etc complete all as specified and as directed.

S & F 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides etc complete all as specified and directed.

S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces. complete all as directed and specified.

S & F 35 mm thick factory made second class hardwood glazed /gauzed and skelton shutters, open rebated & prepared to recive glass/ gauged etc as in mosquito proof door shutter etc with out sash bars, edges of framing plain, chamfered or rounded,fitted with cut & mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part I section 8, clause 8.20 (a) and fixed to chowkats

S&F in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed.

S & F 100 mm size Butt hinges (medium weight) cold rolled,mild steel complete all as specified and as directed

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed

S&F 150 mm size handles, extruded aluminium alloy fabricated type, anodised, complete all as specified and as directed.

S & F Mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed.

S&F in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed complete all as specified and as directed.

S&F in repairs 2nd class hard wood plain small fittings such as brackets of any type , latch and hinge blocks, shaped door and window stopes and the like , including all necessary labours, articales not exc 200 cu.cm each complete all as specified and as directed.

M & L Preparation of new wood surface on wood or wood based material over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of prink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads complete all as specified and directed.

S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F Figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed

M&L 2 nd class hard wood plain fillets of sectional area exc 6& not exc 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed.

M&L 2nd class hard wood plain fillets of sectional area exc13 & not exc 25 sq.cm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face complete all as specified and directed.

M&L in repairs 18mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with svrews to timber frame work complete all as specified and directed.

M&L in repairs 12 mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with svrews to timber frame work complete all as specified and directed.

M&L Decorative laminate 0.9mm thick Type I of texture surface finish , colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.

M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

S & F in repairs Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws complete all as specified and directed.

S&F 50 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and as directed.

S&F in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repairs 0.56 mm thick plain anodised Aluminium sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminium alloy screws complete all as specified and as directed.

S&F Steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.25mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc, all as per manufacturers instructions,as specified and directed by Eng-in-charge.

S&F Steel windows (glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. Sections for frame should be of 48mmx50mm, section for mullian should be 48mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm . 4mm thick plain sheet glass to be used for glazing of glazed shutters, including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc,all as per manufacturers instructions,as specified and directed by Eng-in-charge.

S&F Steel windows (Fly proof shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. Sections for frame should be of 48mmx50mm, section for mullian should be 48mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing wire mesh should be of 18mm x 0.6mm . 0.25mm dia 1.40mm aperture stainless steel wire mesh to be used for glazed shutters,etc all as per manufacturers instructions,as specified and directed by Eng-in-charge.

S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5 mm PVC sheet, mitre cut at Two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15 mm MS square tube the two vatted profiles are to be reinforced with 19 x 19 mm MS squre tube the 50% of bottom portion is fixed with 4 mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36 mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12 mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc all as per manufacturers instructions,as specified and directed by Eng-in-charge.

Taking down steel/aluminium windows/ventilator/Doors complete with frames and shutters (without taking off the shutters) of area not exc 2.00 sqm complete all as specified and as directed.

S&F Standard aluminum sections of any Type as in doors, windows, ventilators, partitons etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directe Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for n exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.

Supply only for 12mm thick Veneered decorative plywood,grade I (with BWR resin) decorative both side faces etc complete all as specified.

S&F in repairs aluminium powder coated (fancy type) tubular curtain rod, 20mm dia, complete all as specified and as directed.

S&F in repair bracket aluminium powder coated (fancy type) for 20 mm dia tubular curtain rod(for item above) complete all as specified and as directed

S&F 25 mm bore Stainless steel curtain rod,fancy type complete all as specified and as directed

S&F in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed

Dismantling of wrought iron or MS works of any description such as ,chajja etc, including necessary straightening of bends complete all as specified and directed.

S&F Mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and as directed.

S&F Mild steel sheeting of 1.25 mm thick plain, black sheet as in wall cladding, covering to door shutter and similar works cut to size, holes punched, including round headed screws fixed to steel framing with plan 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and as directed.

Routine maitenance of rolling shutter Area not exc 10.00 sqm and the maintenance including the following all as specified and directed. (A)Taking down hood covers for carrying out routine maintenance and refixing.(B) Dismantling the MS and CI works of any description such as sheets, shafts, cost iron wheels lath etc and taking down helical springs, rollers and other accessories etc.(C) Refixing the unserviceable accessories such as shafts, helical springs, rollers lath sheets, cast iron wheels, including drilling, welding etc.(D) Cleaning, oiling, greasing etc. complete of all movable parts all as required at site( Note- The parts and accessories to be replaced shall be measured and paid seperetely and any defects noticed during the period of contract the same shall be rectified by the contractor with out any cost.)

Supply only mild steel lock plate 150mm width 3.15mm thickness reinforced with MS angle of 35x35x5 mm at bottom including pulling handle sliding bolt etc complete all as specified and directed.

Supply only new helical springs of size n.exc 50 Cm long as required for rolling shutters etc all as specified and directed.

Supply only MS lath 1.25 mm thick for rolling shutter of size and description all as specified and directed.

Supply only MS plain sheet 1mm thick as in hood cover for rolling shutters of size and pattern as approved all as specified and diredcted.

S & F Steel rolling shutter ( thickness of lath 1.25mm thick) without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated and including taking down of any thickness etc, complete push pull or manual type etc complete all as specified and directed.

M&L Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W Gde E-250 quality A and complete all as specifed and directed.

S&F Rolled mild steel sections of frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde E-250) quality “A” complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and directed.

S&F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39 x 29.7 x 0.60mm cross tee 29 x 24.7 x 0.60mm and wall angle 22.2 x 22.2 x 0.50 mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed.

M&L Roof tiles, Mangalore pattern,interlocking at side joints, laid dry incl dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar and dismantling old broken / damaged manglore pattern tiles etc complete all as specified and as directed.

Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc and refixing / relaying the old tiles in position incl making good the damaages with CM (1:3) complete all as specified and as directed.

Dismantling battens for tiles any size exceeding 15cm in spacing complete all as specified and as directed.

M&L 2nd class hardwood Plain fillets exc 13 and n.exc 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads for fixing manglore pattern tiles etc. complete all as specified and as directed.

BHEEMRAO PATIL CONTRACTOR (BID ID -3465830)

Mavee Syndicate (BID ID -3474473)

M/S RADHIKA ENTERPRISES (BID ID -3467497)