Internal finishing / renovation of Mechanical Division office

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. (as per detail annexed in Annexure D Schedule of Quantity)

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in cement mortar. (as per detail annexed in Annexure D Schedule of Quantity)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) (as per detail annexed in Annexure D Schedule of Quantity)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area of 3 sq. metres and below. (as per detail annexed in Annexure D Schedule of Quantity)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area beyond 3 sqm. (as per detail annexed in Annexure D Schedule of Quantity)

Earth work in excavation by mechanical means in trenches for foundations, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (as per detail annexed in Annexure D Schedule of Quantity)

All kinds of Soil (80% of total)

Ordinary Rock (20% of total)

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete . (as per detail annexed in Annexure D Schedule of Quantity)

Providing and lying of cement concrete work in the Lintels/beams, suspended floors, roofs all over in of specified grade M20(1:1.5:3) using 20mm nominal size crushed stone aggregate excluding the cost of centering and shuttering. (as per detail annexed in Annexure D Schedule of Quantity)

Reinforced cement concrete work, columns, pillars, upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement in M20 (1:1.5:3) mix. (as per detail annexed in Annexure D Schedule of Quantity)

Formwork for concrete casting including strutting, propping removal and stacking. (as per detail annexed in Annexure D Schedule of Quantity)

R/F of RCC work including cutting placing in complete Job @1.2Quintal per cum of RCC. (as per detail annexed in Annexure D Schedule of Quantity)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) . (as per detail annexed in Annexure D Schedule of Quantity)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (as per detail annexed in Annexure D Schedule of Quantity)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter. (as per detail annexed in Annexure D Schedule of Quantity)

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats . (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw in 35 mm Second class Kail wood . (as per detail annexed in Annexure D Schedule of Quantity)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing factory made uPVC AIS of approved brand/ make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with <0.25 and >0.35 VLT may be introduced.) (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing carved wood door including ISI Marked MS pressed Butt hinges bright finished of required size with necessary screws including panelling,polishing all complete as per direction of Engineer Incharge. (as per detail annexed in Annexure D Schedule of Quantity)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including carving on the main door (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing plain lining tongued and grooved red wood including wooden plugs with wooden tiling of three layers of design proposed by concerned in complete with necessary screws and priming coat on unexposed surface including varnishing and fixed on jambs (1"x2" size), 2' centre to centre. Complete Job. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing ply wood 4mm thick noty point one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, wooden joist (1"x2" size) including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures on ceiling including varnishing. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing of KHATAM BANDI (panch Murabah) ceiling of 1st class budloo /Fir wood including framework which is to be paid sparately . (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183. Density 16 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing Gl wire. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing action-tesa flooring including including cornice and other requirements in complete. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing almirah/cupboard of 19 mm plywood of various sizes including fitting finishing fixtures like as handle,L-Drop,lock,chachar etc. as require at site etc with decorative doors samica in complete job as direction of engineer Incharge. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20mm thick bed of cement mortar 1: 4(1 cement:4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and Fixing Sanitary Items: (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing PPR Unions 25mm.

Providing and fixing brass bib cock of approved quality

P&F CP Brass Single lever telephonic wall mixer of quality and make as approved by engineer in charge.

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 20 mm nominal bore.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

P & F Floor mounted white vitrous china single piece double trap syphonic WC of approved brand, shape, size and pattern including integrated white vitreous china cistern with capacity 10 liter with dual flushing system includin all fittings & fixtures,seat cover, cistern fittings, nuts bolts, gaskets, jet spray etc including making connection with the existing P/S trap complete in all respects as per directions of Engineer in Charge.

Providing and fixing bathroom accessories set (soap case, towel rod, cabinet mirror, hooks etc) directed as per site in charge.

Providing and fixing wash basin with C.I bracket, 15mm dia cp brass single hole basin mixer of approved quality and make, i/c painting of fittings and brackets, cutting and making good the wall wherever required- white vitreous china wash basin size 550x400mm with a 15mm cp brass single hole basin mixer and 32 mm dia C.P brass trap.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for reception of pipes and fittings.

Providing and Fixing of PVC pipe prince make type-B including fixing at required position jointing with PVC washers and solvent including all accessories complete. (as per detail annexed in Annexure D Schedule of Quantity)

Floor Trap

Providing and fixing electrical fittings. Complete job. (as per detail annexed in Annexure D Schedule of Quantity)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following modular switch/ socket on the modular plate & switch box including connections as required. (as per detail annexed in Annexure D Schedule of Quantity)

5 pin 5/6 A socket outlet wherever reqd

6 pin 15/16 A socket outlet wherever reqd

12 watt led concealed whereever reqd

Wiring for heating point with 6 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. As required.

Proving and Installation of Exhaust Fans:

Providing and fixing of gysers of make of 25 lts of brand Havells, crompton, orient, Bajaj with warranty certificate not less than 1 yrs

wiring for circuit / sub main wiring along with earth wiring of the following size of FR PVC Insulated copper conductor single core cable in surface/recessed medium class PVC Conduit as required. (as per detail annexed in Annexure D Schedule of Quantity)

2x 2.5sq.mm + 1 x 2.5 sq.mm earth wire

2 x 4 sq.mm +1 x 4 sq.mm earth wire

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with sliding roller, dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) 2.5kg/m Gauge thickness. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm). (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing Ornamental shingstak(Takul Pakchay) Ladakhi wood carved over the main door of 1st class kail wood including glossy polish along with all accessories required all in complete job. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing of decorative wooden strip below the ornamental shingstak as approved. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing ornamental ladakhi carved main door(8x7) ft made of wood size(6x4)ft including frames and shutters of sizeof ist class kail wood including glossy polishing, necessary screws, Ldrops and other accessories of superior Quality as approved by Engineer Incharge. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing of roller blinds of size approx (8x5)ft of approved Quality including all accessories in complete Job(lmr). (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing Air conditioner with Hot and cold features of 1.5 ton 5 star Dual inverter split AC of approved brand along with all accessories, including testing and commissioning in complete Job. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing Air conditioner with only cooling features of 1 ton 5 star convertible 5 in 1 cooling inverter split AC of approved brand along with all accessories, including testing and commissioning in complete Job. (as per detail annexed in Annexure D Schedule of Quantity)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded @6kg/sft. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing corrugated 3D textured Sheet roofing fixed with fixtures, bolts and nuts of approved brand as per the direction of Engineer Incharge in complete job. (as per detail annexed in Annexure D Schedule of Quantity)

Proiding and fixing of remote controlled wall fan of approved brand andf quaility having a warranty period of not less than 1 year. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing of mirror of size 18'' x 36'' of approved brand and quality. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing of name plate/ (honour board) of Executive Engineer grooved on wooden board of 1st class finished and varnished kail wood. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing of wooden stool made of 1st class kail wood (finished with varnish) of size 18'' x 48'' duly fixed with dunlop and covered with rigzine cloth in front of the Exn office. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing of curtains, doorbells of approved brand and maufacture. (as per detail annexed in Annexure D Schedule of Quantity)

Providing crokery set of approved brand and manufacture. This include 1 Dinner set, 3 Glass set, 3 cup and saucer set, 1 thermosflask, 3 service plate of approved brand and quality and other necessary items. (as per detail annexed in Annexure D Schedule of Quantity)

Providing and fixing of sofa set 5 seater ladakhi type made of approved quality finished wood along with 2 centre table of size 2' x 3'.6''. This includes all the accessories required at the time of installation. (as per detail annexed in Annexure D Schedule of Quantity)

Carriage of Material (as per detail annexed in Annexure D Schedule of Quantity)

carriage of cement and steel by MT by an avg lead of 20 km

Carriage of sand and bajree by an avg lead of 20 km

M/S ASGAR ALI

Smt. Habiba Banoo

M/S Zakir Hussain