RND-554 : Work for ARC based work for fabrication of steel materials at Talad village, Olpad Ta. under Rander Division

SUB: ARC based work for Fabrication of steel Materials at Villge : Talad/ Olpad, Ta: Olpad under Rander Division.

SR ITEM CODE DESCRIPTION UNIT FY 2024-25

Fabrication of Anchor Rod from 16 SQ.mm MS Raoundbar & 65 mm x

1 65 mm x 6 mm / 50 mm x 50 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of Eye Bolt from 16 SQ.mm MS Raoundbar with supplying of

2 9910000015 2 (two) nuts of suitable size as per approved drawing and requirement No.

of the company.

Fabrication of Turn Buckle from 16 SQ.mm MS Raoundbar & 65 mm x

3 65 mm x 6 mm / 50 mm x 50 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 11' (feet) long Top/Bottom/D.O. angle from 65 mm x

4 9910000030 mm x 6 mm M.S. angle as per approved drawing and requirement of No.

Fabrication of 9' (feet) long Top/Bottom/D.O. angle from 65 mm x

5 9910000031 mm x 6 mm M.S. angle as per approved drawing and requirement of No.

Fabrication of 4'6" (feet) long Tapping / bracing angle from 65 mm x

6 9910000003 mm x 6 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 2'3" (feet) long bracing/ support angle from 65 mm x

7 9910000039 mm x 6 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 11KV HT 'V' Cross Arm from 65 mm x 65 mm x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of 11KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S.

9 9910000022 angle and 50mm x 6 mm M.S. flat as per approved drawing and No.

requirement of the company.

Fabrication of 22KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S.

10 9910000055 angle and 50mm x 6 mm M.S. flat as per approved drawing and No.

requirement of the company.

Fabrication of 22KV HT 'V' Cross Arm from 65 mm x 65 mm x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for PSC pole from 50mm x

mm M.S. flat as per approved drawing and requirement of the company.

Fabrication of 'U' Clamp from 50mm x 6 mm M.S. flat as per approved

drawing and requirement of the company.

Fabrication of 'C' clamp suitable for PSC pole from 50mm x 6 mm M.S.

flat as per approved drawing and requirement of the company.

Fabrication of 'C' clamp suitable for RSJ GIRDER pole from 50mm x

15 9910000044 6 mm M.S. flat as per approved drawing and requirement of the No.

Fabrication of Three hole patti from 50mm x 6 mm M.S. flat as per

approved drawing and requirement of the company.

Fabrication of 11' (feet) long Top/Bottom channel from 100 mm x

17 9910000061 mm x 5 mm M.S. channel as per approved drawing and requirement of No.

Fabrication of 9' (feet) long Top/Bottom channel from 100 mm x 50 mm

18 9910000060 x 5 mm M.S. channel as per approved drawing and requirement of the No.

Fabrication of 11'(feet) long angle bracing from 50 mm x 50 mm x

19 9910000035 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 9'(feet) long angle bracing from 50 mm x 50 mm x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of 11' (feet) long channel welded from assorted length of

scrap channel as per approved and requirement of the company

Fabrication of 9' (feet) long channel welded from assorted length of

scrap channel as per approved and requirement of the company

Fabrication of Guy Clamp pair suitable for 10 mtr PSC pole from

23 9910000072 50mm x 6 mm M.S. flat as per approved drawing and requirement of PAIR

Fabrication of Guy Clamp pair suitable for 9/11mtr RSJ GIRDER pole

24 9910000073 from 50mm x 6 mm M.S. flat as per approved drawing and PAIR

requirement of the company.

Fabrication of 5' (feet) long Tapping angle from 65 mm x 65 mm x

25 9910000066 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of H.T. Ext'n suitable for 22KV system from 65 x 65 x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of H.T. Ext'n suitable for 11KV system from 65 x 65 x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of 750 mm long Channel for HT AB conductor from 100mm

28 9910000069 x 50mm x 5mm M.S. Channel as per approved drawing and requirement No.

of the company.

Fabrication of 22KV HT "V" Cross Arm from 100mm x 50mm x 5mm

29 9910000070 M.S. Channel as per approved drawing and requirement of the No.

In Words :- Five Lakh Rupees Only

Executive Engineer (O&M)

DGVCL, Rander Division