TN-23025 Supply of portable and trolley mounted fire- extinguisher of different capacities for First-Aid fire Fighting system (Extinguisher) Installed at KSTPS, Kota

ABC Type Fire Extinguisher Cap. 6 kgStored Pressure with following requirements:- Filled with Mono Ammonium Phosphate Powder 50% , EN 3/ IS 15683 Pressure Gauge, Discharge Time not less than 24 Sec, Controllable discharge mechanism, Jet Range not less than 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating4A, 144B, Can Construction : Deep drawn & CO2 MIG welded, CE Marked Valve with S.S Lever with inbuilt NRV & Safety Release Provision, EPDM Rubber Hose With S.S. Nozzle & of both end Aluminium clamped, Plastic base provided, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material Along with S.S Chain, Spring made up of Stainless Steel material and Welding Procedure approved by TPI with 6 G certification, Sheet metal thickness : 1.8 mm or more, Label UV resistant transparent labels Special IP coating to prevent from even highly effective petroleum fumes also, Aluminium siphon tube, Helium Leak Detection Tested, ISI Approved IS 15683:2018 and CE Certified.

ABC Type Fire Extinguisher Cap. 9 kg Stored Pressure with following requirements:- Filled with Mono Ammonium Phosphate Powder 50% , EN 3/ IS 15683 Pressure Gauge , Discharge Time not less than 24 Sec, Controllable discharge mechanism, Jet Range not less than 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, A Rating- 6A, B Rating 183B, Can Construction : Deep drawn & CO2 MIG welded, CE Marked Valve with S.S Lever with inbuilt NRV & Safety Release Provision, EPDM Rubber Hose with S.S Nozzle & of both end Aluminium clamped, Plastic base provided, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material Along with S.S Chain, Spring made up of Stainless Steel material and Welding Procedure approved by TPI with 6 G certification, Sheet metal thickness : 2 mm or more, Label UV resistant transparent labels Special IP coating to prevent from even highly effective petroleum fumes also, Aluminium siphon tube, HeliumLeak Detection Tested, ISI Approved IS 15683:2018 and CE Certified

DCP trolley mounted Cap. 50 kg. Stored Pressure Fire Extinguisher Filled with Mono Ammonium Phosphate Powder 50% confirm to IS 4308, Stored Pressure Type, EN 3/ IS 15683 Pressure Gauge, Applicable fire classes A, B & C. Discharge mechanism of Rubber Braided Hose with SS spring to avoid kink (at least 5 meter long) & shut off Aluminium alloy (IS:617) nozzle, Discharge Time not less than 30 Sec, Jet Range not less than 6 Meters, Average Discharge is 85%, Body Construction by MIG Welding technology, Brass forged cap with Auto safety release mechanism at 21 kg/cm2, Internal & External - Pure Polyester Powder coating (UV Resistant) ANTI-CORROSIVE TREATMENTPhosphate treatment followed by epoxy powder coating of body DFT not less than 50 Micron, Trolley wheel made of Solid rubber, Labels are UV resistant transparent labels Base material is Vinyl Ink used is UV resistant IP coating to prevent from even highly effective petroleum fumes also, Thickness of sheet - 4.00 mm or more, Fire rating: 20A:233B.

Mechanical Foam stored pressure type 9 ltr. Fire Extinguisher Filled with AR-AFFF Foam confirms to IS 4989 (Part-II). Applicable fire class A & B, EN 3/ IS 15683 Pressure Gauge , Discharge Time not less than 35 Sec, Controllable discharge mechanism, Jet Range not less than 7 Meters, Average Discharge is 95%, Fire Rating- 4A:144B , Can Construction : Deep drawn & CO2 MIG welded, Controllable discharge mechanism with EPDM Hose & Air aspirated Aluminium Nozzle, External Pure polyester powder coated (UV resistant) and Internal Plastic lining, CE Marked Brass forged Valve with S.S Lever & inbuilt NRV & Safety Release Provision, safety Pin is made of SS material Along with S.S Chain, Spring made up of Stainless Steel material, Aluminium siphon tube, Label UV resistant transparent labels Special IP coating to prevent from even highly effective petroleum fume Sheet metal thickness 2 mm or more, As per IS 15683:2018, ISI & CE marked.

Mechanical Foam trolley mounted 60 ltr. Stored Pressure Fire Extinguisher Filled with AR AFFF Foam ISI (3%), EN 3/ IS 15683 Pressure Gauge, Applicable fire class A & B, Controllable Discharge mechanism, Discharge Time min. 30-180 Sec, Jet Range not less than 8 Meters, Average Discharge is 95%, Fitted with EPDM Hose with SS spring to avoid kink (at least 4 meter long) &Aluminium Air aspirated Nozzle, Internal & External Pure polyester (UV Resistant) powder coated, Brass forged cap, Trolley wheel made of Solid rubber, made up from not less than 3.15 mm thick sheet and Welding Procedure approved by TPI with 6G certification. As per standard IS 16018:2012, Fire rating 20A:233B.

CO2 High Pressure Portable 4.5 kg Fire Extinguisher Filled with CO2 Gas as per IS 15222, Control discharge mechanism fitted with at least 1 Meter Wire Braided Hose & Flat Horn (Electrical nonconductor Polyethylene (Discharge horn) with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time not less than 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, External coating is of enamel spray painting, Labels are UV resistant transparent labels Base material is Vinyl Ink used is UV resistant IP coating to prevent from even highly effective petroleum fumes also, Siphon tube- Aluminium, Brass Valve - wheel type as per IS:3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Shell thickness 4.0 or more, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2018 and ISI marked.

CO2 High Pressure trolley mounted 22.5 kg Fire Extinguisher Filled with CO2 Gas as per IS 15222, Control discharge mechanism fitted with at least 5 Meter Wire Braided Hose & Flat Horn (Electrical nonconductor Polyethylene (Discharge horn) with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time not less than 37 Sec, Average Discharge is 95%, applicable on Class B, C and electrically started Fire, Fire Rating: 89B, External coating is of enamel spray painting, Labels are UV resistant transparent labels Base material is Vinyl Ink used is UV resistant Special IP coating to prevent from even highly effective petroleum fumes also, Siphon tube-Aluminium, Brass Valve - wheel type as per IS:3224, ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Shell thickness Min. 5.2 mm or more, Body confirms to IS 7285 and PESO APPROVED, Extinguishers.