Volleyball Court at HSS Boniyar

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead up to 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge.All kinds of soil : Engagement of JCB for bluk execvation for making seats for aurdaiance as per direction of Engineer Incharge at site

Treatment of soil using chemical like round up for anti weeding laid in holes @ 300 mm c/c and consumpution @ 600 ml/ 10 Sqm complete job as per direction of Engineer Incharge at site

Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade.

Excavating, supplying and filling of local earth RBM (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and laying and compacting stone agrregates of different sizes to form contour and elevation to the desired level as per the Drawing and instruction of Engineer Iincharge (size 40 mm /20 mm/10mm ) down black stone aggregate up to a depth of 300 mm from below primary backing . Layers of stone to be rolled as per desired slope and compaction using 8-10 tonnes Road roller over open area & pitch roller over areas with drainage pipes. including all cost and carriage complete job as per direction of Engineer Incharge at site

Supply and installation of artificial UV resistanat polyethylene synthetic grass with rigid monofilment yarn, minimum 40mm pile height. The turf should have minimum 40mm Pile Height made of POLYETHYLENE Monofilament & Pile weight minimum 900 g/m2 and above and stitched rate minimum @ 120/ mtr or above. The turf should have Dtex/Denier >=12300. The Primary backing of turf should be made of 100% POLYPROPYLENE, minimum weight 240 gram/m2 and above with Coating with Carboxylated SBR Latex appr. 1200 gr/m2 or Butadiene Styrene with weight of 900 g/sqm and total backing wt should not be less than 1140 g/sqm or as approved by FIFA under FIFA Quality Category. The infill must be 22-25Kg Silica Sand, minimum 7kg & above SBR Rubber Granules. The line marking shall be stitched tufted material (Painted lines are not acceptable). The rate is inclusive of All applicable taxes, Lavies, Octoria, transportation loading/unloading complete except custom duty exumption Including Maintenance of 3 years by way of brushing and adding infill as and when required. Including all cost and carriage complete job as per direction of Engineer Incharge at site

Designing, Supply, installation and third party testing and commissioning of Solar Standalone street light system with MPPT charge controller and IP 65 protection and Luminous Flux of 4500 lm & lumen efficacy of 150 lumen/watt or more, lithium ferro phosphate battery pack, MONO Crystalline type Solar board with 60W or more PV Module & Solar board voltage of 18 V having movement and Lux Sensor, with 2000 cycle Battery charging & discharging cycles with Color rendering index (CRI) >70 & Dimmable Configurability. Note: Firm has to submit originallity certificate of material from OEM or Authorized Distributor with 05 years of warranty. Including all cost and carriage complete job as per direction of Engineer Incharge at site

Providing of Fixing Height Adjustable Fixed Volley Poles 4 INCH with Net and Anteena Including all cost and carriage complete job as per direction of Engineer Incharge at site

Carriage of materials by Mechanical Transport including loading, unloading and stacking complete job:

Stone aggregate lead upto 10 km