Tender for LAYING OF UNDERGROUND CABLE, FAULT FINDING & RECTIFICATION WORK AT VARIOUS SDN UNDER IDAR DO, UGVCL

Sr. Quant Rate per Total Amount

Sr. Quant Rate per Total Amount

No. ity Unit in Rs. in Rs.

Laying (including installation, testing and

commissioning) of various size of Single circuit 11 KV

XLPE insulated Alluminum armoured Cable in ground

1200 mm deep and 300 mm wide trench, providing

sand cushioning below (75 mm thick layer of sand)

1 9911000013 and above (75 mm thick layer of sand) of the cable MTR 400 460

and covering it with RCC half round Hume pipe (150

mm inner diameter with thickness of 30 mm and One

meter in length) before refilling pre-bonding

tap/warning tap should provide below 700 mm from

the ground level and back filling the same to make

ground(including

Laying level as per original. Astesting

installation, per specification

commissioning) of various size of Double circuit 11 KV

XLPE insulated Aluminum armoured Cable in ground

in single trench 1200 mm deep and 500 mm wide

trench, providing sand cushioning below (75 mm thick

layer of sand) and above (75 mm thick layer of sand)

2 9702010332 of the cable and covering it with RCC half round MTR 400 642

Hume pipe (150 mm inner diameter with thickness of

30 mm and One meter in length) before refilling pre-

bonding tap/warning tap should provide below

mm from the ground level and back filling the same to

make ground level as per original. As per specification

and drawing of UGVCL. (RCC half round pipe should be

Laying of various size of 11 KV XLPE insulated

Aluminium armoured cable above ground in air for

termination of cable on pole as per site condition and

3 9911000030 instruction of engineer in charge ( Excluding cost of MTR 300 53

clamp and pipe )ground level as per original. As per

specification and drawing of UGVCL(RCC half round

pipe should be provide throughout in cable without

Supply and installation for set of clamps of clamps

made from 50*6 mm GI flat ( Min weight of flat

KG per set) for fitting for 110mm GI/HDPE pipe above

ground with the pole ( with cost of nuts & bolts)

Supply and installation for set of clamps of clamps

made from 50 x6 mm GI flat ( Min weight of felt

KG per set) for fitting for 160mm GI/HDPE pipe above

ground with the pole ( with cost of nuts & bolts)

Laying of various sizes of 11 kv XLPE insulated

6 9909000003 Aluminium armoured cable in cable tray/trench over / MTR 200 206

below the ground level( Excluding cable tray, only

SCHEDULE-B

OPEN TENDER FOR LAYING OF UNDERGROUND CABLE, FAULT FINDING & RECTIFICATION WORK AT VARIOUS

SDN UNDER IDAR DIVISION.

TENDER NO: - UGVCL/IDAR DIVISION/E-TENDER/2026-27/ No.41

Description

Sr. Quant Rate per Total Amount

Sr. Quant Rate per Total Amount

No. ity Unit in Rs. in Rs.

Laying of HDPE pipe confirming to IS

4984:1955(Amendment no.2) having diameter

mm and minimum thickness 5mm at a minimum

depth of 1200mm below the road surface by push

through method by drilling the road with HDD

7 9909000010 machine/manualy without breking the road surface MTR 200 804

and laying of nay size of HT/LT XLPE insulated

aluminum the duct as per the instruction of EIC and

specifications (without cost of HDPE pipe,cable will be

supplied by UGVCL)

Supply of HDPE pipe having 110/120 mm diameter (As

required), minimum thickness 5 mm as per IS (

8 9913000002 Amendment no.2 IS 4894:1995) for laying of PE MTR 150 626

100,6kg/cm2 for 11 kc XLPE cable.

Supply and Fixing of medium grade GI pipe of size of

9 9913000007 110 mm Diameter (Min 2.5 meter required) Weight 9 MTR 12 932

to 10 kg/Mtr.

Indoor application: HT push on/heat shrinktype end

termination preferably for at switchgear end boxes,

transformer(PAD/Pole mounted) for 3 core 185 Sq

mm11 kV XLPE Aluminium Conductor Armoured cable

10 9703010002 as specified with connection of leadsincluding cutting, Nos. 90 5689

stripping of cable, insulations, providing compression

type terminals,crimping of lugs with suitable crimping

tool. ( As per Technical Specification)

Indoor application: HT push on/heat shrink type end

termination preferably for at switchgear end boxes,

transformer( PAD/Pole mounted) for 3 core 240 Sq

mm 11 kV XLPE Aluminium Conductor Armoured

cable as specified with connection of leads including

cutting, stripping of cable, insulations, providing

compression type terminals, crimping of lugs with

suitable crimping tool. ( As per Technical

Specification)

Provinding and fixing HT push on/heat shrink type end

outdoor termination kit of

3M/Raychem/Frontier/Yamuna make at switchgear

12 9703010001 end boxes, transformer (PAD/Pole mounted) for 3 Nos. 90 7193

core 11 KV XLPE Aluminium Conductor Armoured

cable as specifield with connection of leads including

cutting, stripping of cable , insulationas, providing

compression type terminal, crimping of lugs with

SCHEDULE-B

OPEN TENDER FOR LAYING OF UNDERGROUND CABLE, FAULT FINDING & RECTIFICATION WORK AT VARIOUS

SDN UNDER IDAR DIVISION.

TENDER NO: - UGVCL/IDAR DIVISION/E-TENDER/2026-27/ No.41

Description

Sr. Quant Rate per Total Amount

Sr. Quant Rate per Total Amount

No. ity Unit in Rs. in Rs.

13 9703010001 Provinding and fixing HT push on/heat shrink type end Nos.

outdoor termination kit of

3M/Raychem/Frontier/Yamuna make at switchgear

end boxes, transformer (PAD/Pole mounted) for 3 7760

core 11 KV XLPE Aluminium Conductor Armoured

cable as specifield with connection of leads including

cutting, stripping of cable , insulationas, providing

compression type terminal, crimping of lugs with

Provinding and fixing HT push on/heat shrink type

Straight joint 3M/Raychem/Frontier/Yamuna make

for 3 core 11 KV XLPE Aluminium Conductor

Armoured cable as specifield with connection of leads

including cutting, stripping of cable, insulations,

providing compression type terminals, crimping of

luges with suitable crimping tool. (120/150/185 mm

HT XLPE Cable)

Provinding and fixing HT push on/heat shrink type

Straight joint 3M/Raychem/Frontier/Yamuna make

for 3 core 11 KV XLPE Aluminium Conductor

Armoured cable as specifield with connection of leads

15 9913000025 including cutting, stripping of cable, insulations, Nos. 40 9944

providing compression type terminals, crimping of

luges with suitable crimping tool. (240 mm 2 HT XLPE

Provinding and fixing of Route Marker of CC 1:2:4,

150mm*150mm*750mm concrete stone embedded

in earth atleast 300mm below the GI and 450mm

above GI at distance of approximately 100 mtr or as

16 9501301016 directed by engineer in charge The route marker must Nos. 50 437

be painted with yellow colour of stone with red colour

for embracing on stone UGVCL 11 KV cable

Supplying & Erecting of maintaince free

earthingSystem comprising of 17.2mm dia 3mtr Long

17 9912020032 earthing electrode of low carbon steel electrodewith Nos. 40 7746

250 micrns copper coating on cable armour as per

specifications.

SCHEDULE-B

OPEN TENDER FOR LAYING OF UNDERGROUND CABLE, FAULT FINDING & RECTIFICATION WORK AT VARIOUS

SDN UNDER IDAR DIVISION.

TENDER NO: - UGVCL/IDAR DIVISION/E-TENDER/2026-27/ No.41

Description

Sr. Quant Rate per Total Amount

Sr. Quant Rate per Total Amount

No. ity Unit in Rs. in Rs.

Supply installation & commissioning of earthing

conductor 25x3 mmG.I. strip for pole mounted

transformer and upto FSP,RMU as well as connection

to be made To the earth pit. Rates inclusive of hot

dipped hard wares & cable armour

labor charges for HT cable underground fault

20 9912020008 FRP Clamp for cable Nos. 50 130

21 9912020008 FRP Clamp for Pipe Nos. 50 146

22 9912020008 Cable Climbing on pole Mtr. 60 170

Construction of Plinth for Installation of Ring Main Un

TOTAL:-

Welfare Cess @ 1% of Estimated Cost

GRANT TOTAL:-

Note :- The Rates are Including GST.

CONTRACTOR SIGNATURE EXECUTIVE ENGINEER

WITH STAMP UGVCL D.O. IDAR