Estimate for repairing of gates and gearing system, Hoisting structure,painting of Cross regulator of Sidhwan branch canal at RD 202400

Amount

Scraping brushing of Whole Structure to remove rust,dust and dirt etc.

Applying Priming coat with metallic primer steel/iron work including prepairing of surface

Painting two or more coats with synthetic enamel paints in all shades on old metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Painting two more coats with Anti corrosive Bitumastic paint to give even shade

Lubricants synthetic Hetiv Grease (1 Kg Packing)including GST

Lubricants 10w40 or 10w50 Mobile oil(1 Litre Packing)including GST

Providing and fxing of hollow P-type bulb rubber seal 120x44mm in all respects

Providing and fxing flat wedge seal 120x20mm along bottam Complete in all respects

Removing damanged old rubber seal bulb or flat including clamp plate of all size & types.

Providing and fixing S.S nuts and bolts of all size and lengths required

Supply & Installing of new steel wire rope in position including linking gate & hoist mechanism for smooth balance operation including oiling & greezing complete in all respect & to entire satisfaction of engineer including (Diameter=20mm)(Length=25 meter/gate)(wt=1.67kg/m)

Advance direction sign board 1200x900mm rectangular as per IRC67-2012 with high intensity microprismatic grade retro reflective sheeting as per ASTM D 4956-09 and as per IRC67-2012 grade sheeting fixed over 4mm thick aluminium Composite Material(ACM) sheet having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets@200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hallow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications.Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflection sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012.Using high intensity Microprismatic grade retro reflective sheeting type IV as per ASTM D 4956 09 and as per IRC 67 2012.

Providing and fixing 7 Watt LED 40 watt Solar Pannel Battery 12V-40V Ah with T-YEL Battery with 7m pole fixed with 1:2:4 concrete foundation of size 1.2x0.6x0.75 complete in all respects and to entire satisfaction of engineer-In-Charge

Crane 35 Tonnes Charges for lifting Dismantling Loading/ unloading & fitting of gates at site@5hrs per gate

Supply & fixing of chequered base plate 8mm thick

Dismanting of damage wire rope/de-linkin gates and hoist mechanism complete in all respects and to entire satisfaction of Engineer-In-Charge

Removing,assembling & fixing in position of gun metal bush, complete in all respects and to entire satisfaction of Engineer-In-Charge

Removing damaged railing pipe,complete in all respectes and to entire satisfaction of Engineer-In-Charge

Supply of GI pipe hollow/pipe of any size

Commisioning and testing of gates at site complete in all respectes and to entire satisfaction of Engineer-In-Charge

Fillet welding with high strength steel rods complete in all respectes and to entire satisfaction of Engineer-In-Charge(8mm wide weld)

ANJU INDUSTRIES