Ramganga Nagar Aawasiya Yojana ke Antargat Sector-1, 2, 3 evam 9 mein Nirmit Vibhinna Parkon mein Prakash Vyavastha ka karya.

Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. 2 nos. 6 sq. mm. cable. FRLSH PVC insulated multistrand copper conductor cable. UP PWD SCHEDULE 2018 (S.I NO 289(D) )

Supply and laying of almunium conductor PVC insulated aromoured served Sheathed cables 1100V grade in Existing RCC/Hime/Metal pipe as directed by Engineer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (S.I NO. 20b.1.11 LUCKNOW PWD SHEDULE 2024) (at the rate of 388 X 0.8475=329) (a) 35 Sqmm 3-1/2 Core

Supply and laying of almunium conductor PVC insulated aromoured served Sheathed cables 1100V grade in Existing RCC/Hime/Metal pipe as directed by Engineer in charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (S.I NO. 20b.1.9 LUCKNOW PWD SHEDULE 2024) (at the rate of 283 X 0.8475=237.84) (a) 16 Sqmm 4 Core

Supply and fixing of 12.5 mtr. Hight Mast shaft of approved make with using system hot dip glavanized inside & out side dip, heaving pole sheet thuckness 3 mm. Top dia minium 150 mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3 & having no cucumferential weld, with accesories for high mast such as head frame suitable for 6 luminaries & its contol gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. (S.I NO. 21.3 LUCKNOW PWD SHEDULE 2024) (at the rate of 246218.00 X 0.8475=208669 )

Supplying and laying of following size DWC HDPE pipe ISI marked along with all aceesories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, Jointing etc.direct in ground(75cm below ground level), including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required. 63mm dia (OD-63 mm& ID-51 mm nominal (S.I. No. 15.16) CPWD/2025 (289.00X0.755X0.97=212)

Making suitable earthing of electrical pole atleast 2.5 mt long 20mm dia M.S. rod 7/16 Of SWG GI including the cost of all materials labour T&P etc. required for proper completion of work. AR (As per UPPCL cost shedule 2018-19 P.S.)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (e) (ii) 25 A TPN UP PWD SCHEDULE 2018 (S.I NO 807 (e) (ii) )

Supply and fixing of factory wired integral LED flood light luminies with die cast almunium housing with loughend glass UV Stabilzed PC cover and lenses built with mandatory driver set suitable for 100 to 120 Watt Confirning to IP 66, IX 07 AND above prolection complete in all respects. 12000-14400 system lumens High power LED with lenses > 120 LM/W, PF>0.95 THD < 10% at full load, CRI > 70, Potted driver set in metul housing (Net Circuitory) Phase to Phase Proiection at 400 V & > 300 V auto cut and re-start feature, 4 KV interial Surge Proiection with 05 year Warrenty. (0.8475X10884=9224) UP PWD SCHEDULE 2024 (S.I 23.24)

Supplying & fixing of 4.0 mtr high decorative garden/landscape lighting pole, fabricated from galvanized steel/MS pipe, comprising approximately Ø114 mm × 1000 mm lower section, Ø60 mm × 3000 mm upper section and Ø48 mm × 100 mm top shaft, complete with decorative stepped embellishment/collar with black colour primer and PU/Polyester painted finish, service window of approx. 600 mm height with 250 × 80 mm provision for MCB & terminal block, base plate of 200 × 200 × 12 mm thick with 4 Nos. mounting holes, complete with M16 × 450 mm foundation bolts with double nuts & washers, cable entry arrangement, welding, grinding, surface treatment, painting, fixing, erection and all necessary hardware/accessories, complete in all respects as per approved drawing/specification and as directed by Engineer-in-Charge. The OEM shall have its own in-house NABL/ILAC laboratory equipped with a C-type photo goniomete to IES/ANSI 2019 requirements and covering the a testing scope for LED fixtures. The bidder shall sub 9001:2015 certification of the concerned OEM, dul BIS/recognized certification bod with foundation work complete in all respects as per E/I.. (Market Analysis Rate 2026) Make-VAK LIGHTING INDIAN PVT LTD, LEKSA LIGHTING TECHNOLOGIES, SURYA ROSHNI LIMITED, Philips.

Supply & fixing of ETTP Post Top Luminaire, LED Post Top type for outdoor use, connected load 40W ±10%, mains voltage 240V AC, frequency 50Hz, Power Factor ≥0.95, THD ≤10%, integral electronic constant-current LED driver with 4KV driver surge protection and Class-I insulation, driver protection against open circuit, short circuit & reverse polarity, powder-coated aluminum die-casting body with Zn-plated sheet steel & FRP with PU finish, IP66 ingress protection, IK10 impact resistance, pole/surface mounting, overall size Ø215 mm × 290 mm, ambient temperature - 10°C to 50°C, complete as per attached technical specification. Photometry Data: Luminaire optics: Optical system consists of Toughened Glass Cover with Lens; Beam angle: NA; Rated luminous flux: 4400 lm; Luminous efficacy: 110 lm/W; Colour temperature: 5667 K ± 269 K; Colour rendering index: 70; Rated service life: L70 = 50,000 h. The OEM shall have its own in-house NABL/ILAC-accredited laboratory equipped with a C-type photo goniometer conforming to IES/ANSI 2019 requirements and covering the approved testing scope for LED fixtures. The bidder shall submit ISO 9001:2015 certification of the concerned OEM, duly issued by BIS/recognized certification body. complete in all respects as per E/I.. (Market Analysis Rate 2026) Make-VAK LIGHTING INDIAN PVT LTD, LEKSA LIGHTING TECHNOLOGIES, SURYA ROSHNI LIMITED, Philips