GE/J/A 2020-21 (8991/E8)

Amount

M&L for dismantling and removing old burnt out alumunium/ copper winding wire of ceiling fans of size - 1200 mm (48”) sweep of any make and rewinding with new super enameled copper winding wire of existing gauge as per old copper winding pattern and design to give same performance as per original fan's make including providing insulating media, varnishing (Golden), Cleaning, Oiling, Greasing etc and refixing all the parts complete and testing in E/M Store yard to the entire satisfaction of Engr-in-Charge.

All as per item No 1.00 here in before but Exhaust Fans of size 9" ( 225 mm ) Sweep – ditto-

All as per item No 1.00 here in before but Exhaust Fans of size 12" (300 mm ) Sweep – ditto-

All as per item No 1.00 here in before but Exhaust Fans of size 15”/16” ( 375 / 400 mm ) Sweep – ditto-

All as per Item No 1.00 above but Exhaust Fans of Size 18” (450 mm ) Sweep –ditto-

All as per item No. 1.00 here in before , but for wall mounted fan with replacement of osscilating mechanism complete suitable for wall mounting fan and support hud assembly of size - 16"/18" complete all as specified and directed.

All as per item No.1.00 here inabove, but for heavy duty air circulating fan of size - 600 mm ( 24") , 1400 RPM, including replacement of bush / bearing of approved make all as directed NOTE: - (i) For Ser Item No 1.00 to 7.00. The super enamelled winding wire is to BE provided of following make - Devidayal/ USHA/ Chetak of appropriate gauge as approved by Engr-in- Charge. (ii) Any un-serviceable part required for replacement shall be measured and paid separately under respective item of schedule 'A'. (iii) Ceiling Fans/ Exhaust Fans for rewinding/overhauling shall be carried out in E/M yard only. (iv) if Ceiling/ Exhaust fan damaged due to any reason during the repair Contractor will responsible for the same. (v) Contractor will produce guarntee letter for rewinding of fan minimum one year from the date of instalation and testing.

Hanging only ceiling fan repaired or new any size and connecting up to the ceiling rose including taking down old u/s fan.

Fixing only exhaust fan of any size / make at MD/OTM Accn in Army Area and connecting up to the ceiling rose including taking down old u/s fan.

Supply and fixing of Ball bearing SKF/NBC/TATA – 6201 suitable for Ceiling/Exhaust Fans complete all as specified and directed by Engineer-In-Charge.

All as per item No 10.00 above for Ball bearing SKF/NBC/TATA – 6202

All as per item No 10.00 above for Ball bearing SKF/NBC/TATA – 6203

Supply and replacement of gun metal bushes of suitable size for Ceiling fans (any type/any sweep) complete all as directed .

S&F capacitor of 2.5 MFD oil filled insulated with aluminium/ PVC body after removing unserviceable condenser complete all as specified and directed. (Make:-Sharda/Epcos/Phillips/Usha/Tops or ISI marked )

S&F capacitor of 4 MFD oil filled insulated with aluminium/ PVC body after removing unserviceable condenser complete all as specified and directed. (Make:-Sharda/Epcos/Phillips/Usha/Tops or ISI marked ).

Supply and replacement of ' Ú' clamp with rubber reel of standard quality including nut/bolt , lock nut and pin suitable for ceiling fans (any type/sweep) complete all as specified and directed.

Supply and replacement of PVC canopy upper/lower side of standard/ good quality including bolt with nut , lock nut and pin suitable for ceiling fans (any type/ any sweep and make) complete all as specified and directed.

Supply and replacement of fan blade as per existing including fixing screws suitable for ceiling fans 1200 mm sweep (any type/ make) complete all as specified and directed .

Supply and replacement of fan blade as per existing including fixing screws suitable up to 300 mm sweep exhaust fans (any type/ any make) complete all as specified and directed .

Supply and replacement of fan blade as per existing including fixing screws suitable for exhaust fans 375/400 mm sweep (any type/any make) complete all as specified and directed .

Supply and replacement of fan blade as per existing including fixing screws suitable for exhaust fans 450 mm sweep (any type/ make) complete all as specified and directed .

Supply and replacement of bracket with frame as per existing including fixing screws suitable up to 300 mm sweep exhaust fans complete all as specified and directed.

Supply and replacement of bracket with frame as per existing including fixing screws suitable for exhaust fans 375/400 mm sweep complete all as specified and directed.

Supply and replacement of bracket with frame as per existing including fixing screws suitable for exhaust fans 450 mm sweep complete all as specified and directed.

M & L for painting of ceiling fan size - 1200 mm sweep complete with down rod and blades , cleaning , removing dirt / dust , scrapping out old paint , applying putty and painting with synthetic enamel paint first quality of approved make including writing MES No. in figure & words 25 mm wide with synthetic enamel paint of black colour on ceiling fans complete all asspecified & directed. Note :- The work is to be carried out in E/M store yard to the entire satisfaction of Engr-in-Charge )

All as per item No 25.00 here in before but Exhaust Fans off sizse (225 mm,300mm,375mm,400mm & 450 ) Sweep – ditto-

M & L for pvc stand for capacitor including connection etc.

M&L for louver made of MS sheet 3 mm thick for e/fan of sizes (9'' to 18'') complete all as specified.

Supply and replacement of down rod 90 cm long of 15 mm dia " heavy duty " thread type GI pipe complete with rubber bush, centre bolt , nut , lock nut ,"U" clamp suitable for thread ends connection with cotter pin complete all as specified and directed.

Supply and replacement of down rod 90 cm long of 12 mm dia " made out of high density mild steee including drilling hole for split pin complete all as specified and directed.

Supply and replacement of down rod 60 cm long of 12 mm dia " made out of high density mild steee including drilling hole for split pin complete all as specified and directed.

Suply and fixing connecting PVC insulated copper conductor (FRLS) of size not less than 0.75 sqmm multistranded,unsheated cable up to the ceiling rose,lenth of cable 0.60 RM for each job.

Taking down copper/aluminium point wiring surface/ concealed (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc. removing materials from site of work complete or removing materials to store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring complete with using 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked( Make: Polycab, RR kable, Finolex) passing in and including PVC conduit fixed on PVC saddle and clamp (ISI Marked) with accessories fixed on surface of wall / roof / ceiling etc in sunken pressed steel terminal boxes in wall,including 3.00 mm thick plastic laminated hylem sheet and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour for One light point controlled by one, one way switch

All as per Item No 34 above but One fan point controlled by one way switch.

All as per Item No 34 above but One socket outlet 3 pin 5/6 Amps on same board

All as per Item No 34 above but One socket outlet 3 pin 5/6 Amp on independent board

All as per Item No 34 above but One bell point controlled by one bell push.

All as per Item No 34 above but One light point controlled by two, two-way switches

All as per item No 34 above but with using 2.5 Sq mm single core multistanded copper conductor cable and 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board .

M&L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ( Make: Havells, RR kable,KEI/ Finolex) ( ISI Marked) passing in PVC cassing-N-capping 25/32 mm dia fixed on surface of wall/roof/ceiling with existing/new sunken pressed steel terminal boxes including 3.00 mm thick plastic laminated sheet top cover and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour for One light point controlled by one, one way switch

All as per Item No 41 above but One fan point controlled by one way switch.

All as per Item No 41 above but One socket outlet 3 pin 5/6 Amps on same board

All as per Item No 41 above but One socket outlet 3 pin 5/6 Amp on independent board

All as per Item No 41 above but One bell point controlled by one bell push.

All as per Item No 41 above but One light point controlled by two, two-way switches

All as per item No 41 above but with using 2.5 Sq mm single core multistanded copper conductor cable including 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board .

M&L for concealed Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked , class V ( Make: Havells,Polycab, RR kable, Finolex) ) in concealed PVC conduit (ISI Marked) not less than 20 mm dia heavy duty with accessories etc and including sunken pressed steel terminal boxes in wall, including 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly material and labour for (Note- rates of chasing/cutting & making goods shall be included in the unit rate One light point controlled by one-one way switch.

All as per Item No 48 above but One ceiling fan/Exhaust fan point controlled by one, one way switch through Regulator.

All as per Item No 48 above but One three pin 5/6 Amp socket on same board with other switches.

All as per Item No 48 above but One three pin 5/6 Amp socket on independent board.

All as per Item No 48 above but One bell point controlled by one bell push.

All as per Item No 48 above but One light point controlled by two, two-way switches

All as per item No. 48 above but with 2.5 Sq.mm. (nominal area) cable for one 3 Pin 16 amp socket on independent board including one 1.5 sqmm copper conductor multi stranded green colour PVC insulated unsheathed cable 1100 volts grade as earth wire upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

S&F switch piano flush type single pole one way 6 Amp ISI Marked.Make: Havells/Anchor

S&F switch piano flush type single pole one way 16 Amp ISI Marked.Make: Havells/Anchor

S&F socket outlet 2 in 1, 5 pin, 6 Amp flush type ISI Marked.Make: Havells/Anchor

S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked.Make: Havells/Anchor

M & L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body.Make: Havells/Anchor

M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting. Make:Havells/Anchor/Leader

Supply and fix socket/switch type(2 Module) electonic fan regulator flush type ISI Marked.Make: Havells/Anchor

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-42 DB's suitable for one MCB SPN as incoming and 2 MCB SP as out going,SPN 4Way complete all as specified and directed by Engr-in-charge. Make :-Havells/Legrand/ ABB

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete all as specified and directed by Engr-in-charge. Make :-Havells/Legrand/ABB

S&F sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for With one No 100 Amp 10 KA TPN MCCB as incoming complete all as specified and directed by Engr-in-charge. Make :-Havells/Legrand/ABB

Supply and Fix MCB Single pole ''C" series 5-32 Amps ISI marked.Make :-Havells/Legrand/ABB

Supply and Fix MCB Single pole & neutral "C" series 40 Amps ISI marked.Make :-Havells/Legrand/ABB

Supply and Fix MCB Single pole & neutral "C" series 63. Amps ISI marked.Make :-Havells/Legrand/ ABB

M&L in repairs sub main wiring with 2x6 Sq mm single core multistrandred copper conductor PVC (FRLS) insulated and unsheathed cable passing through PVC Cassing-N-Capping of size 25/32mm ISI marked (MMS) fixed on surface of wall/ceiling and making good the distrurbed surface of wall incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm earth wire shall be measured as unit length.

M&L in repairs sub main wiring with 2x6 Sq mm single core multistrandred copper conductor PVC insulated (FRLS) and unsheathed cable passing through Surface PVC conduit of size 20 mm ISI Marked (MMS)on wall/roof and making good the distrurbed surface of wall incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm earth wire shall be measured as unit length.

Supply and fixing in repair electronic driver as per sample for LED fitting up to 15watt Make Crompton/Havells/CG/Philips/Osram.

Supply and fixing in repair electronic driver as per sample for LED fitting up to 36watt Make Crompton/Havells/CG/Philips/Osram.

Supply and fixing in repair MCCB 63/100 amp TPN, 415 volts 16 KA rupturing capacity including proper thimbles, fixing on DB'S complete all as specified and directed.

Supply and fixing in repair MCB SP C Curve 5-32 Amps Make: Legrand /Havells/ABB

Supply and fixing in repair MCB SPN C Curve upto 40 amp Amps Make: Legrand /Havells/ABB

Supply and fixing in repair MCB SPN C Curve 63 Amps Make: Legrand /Havells/ABB

Supply and fixing in repair MCB TPN C Curve 63 Amps Make: Legrand /Havells/ABB

Fixing LED batten fittings 20/22 watt, ,branded make such as Havells/Surya/ Phillips/Bajaj etc.including 1Nos tube rod complete with all accessories.

Supply and laying or fixing or passing through pipe,1100 volts grade heavy duty cable with PVC insulated aluminium solid stranded conductor served with an inner sheathing of PVC tape and overall pvc sheathed 10sq mm nominal cross sectional area.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 2.5 sqmm as in replacement of any defective/burnt circuit.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 4.0 sqmm as in replacement of any defective/burnt circuit.

S & F Street light bracket made out of 50 mm dia medium grade GI Pipe not less than 1.5m length, bent to shape including set of 50 x 6 mm GI 2 Nos Clamps nut,bolts washers,reducer of required size for suitable any type fittings etc complete including necessary painting all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc complete

S&F round/ square shape surface mounted down light LED fittings 15/18 Watt complete with all accessories and including fixing arrengment etc.complete all as specified and directed. Make: Crompton/ Havells/Phillips/Bajaj

S&F LED bulk head light10 watt complete with all accessories pre wired and including connecting up to fiting with flexible cable of suitable size..Make: Crompton/ Havells/Phillips/Bajaj/ CG/ Jaquar

S & F LED tube road upto 22 watt incl connection complete all as specified and directed. Make: CG/ Havells

Repair, rewinding of submersible pump monoblock type of capacity upto 1 HP, single or three phase, any make incl connection, testing complete all as specified and directed

Repair, rewinding of submersible pump monoblock type of capacity 3 HP, single or three phase, any make incl connection, testing complete all as specified and directed

Repair, rewinding of submersible pump monoblock type of capacity 5/ 7.5 HP, single or three phase, any make incl connection, testing complete all as specified and directed

S & F in repair direct on line submersible pump stater of capacity upto 3 HP, 3 Phase, 415 Volt, with and incl connection, testing complete all as specified and directed make Kirloskar/ crompton

S & F in repair direct on line submersible pump stater of capacity 5/7.5 HP, 3 Phase, 415 Volt, with and incl connection, testing complete all as specified and directed make Kirloskar/ crompton

S&F connecting, and commissioning of Flood light fitting 45/60 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired,conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified makeHavell's/ crompton or equivalent.

S&F in repair vertical mounted integral hibay/midbay luminaire HPSV 150 watt complete with reflector & tublar lamp including connecting up with three core insulated and sheathed flexible, multistranded copper coductor cable of size-1.00 sqmm. Make-CROMPTON cat REF SMB13151H or equivalent of Philips / schreder/Bajaj

S&F Decorative wall light made up of high grade engineering plastic material suitable for 9 W LED lamp make Havells/crompton

Supply and fix post top lantern light fitting upto 18 Watt SV lamp complete With all accessories.

Supply and fix post top lantern light fitting upto 36 Watt SV lamp complete With all accessories.

S&F connecting, and commissioning of street light fitting 45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified.make Crompton /Havell's

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

M/S VENUS BUILDER

Nvimal Engineers and Contractor