PROVN OF 01X TOILET BLOCK ALONGWITH 01X URINAL PT AND 01X WASH HAND BASIN NEAR BUILDING NO. T-112 OF 408 SATA REGT WKSP EME AND CONSTRUCTION OF SHED FOR MT AREA (L-100 FEET, WIDTH-40 FEET AND HEIGHT 30 FEET) AT 63 ENGR REGT AND (9088/E8)

Amount

Note:- All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly

B/R Work : Excavating in post holes (or similar holes) in any type soil, each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers nt exc 25cm ,watering and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded aggregate) in foundations ,filling and mass concrete as inpost hole and, complete all as specified and as directed.

S&F structural steel work in tubular trusses, including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St- 240, complete all as specified and as directed.

S&F structural steel work in roof trusses (framed), trusses,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or flat/ section) including distance ieces, cleats brackets etc., complete all as specified and as directed.

S&F plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with riveted bolted or welding attachement, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description exc 10cm in width, priming with red oxide and applying two coat of synthetic enamel paint, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws, complete all as specified and as directed.

M&L for Hardcore of broken stone or boulders gauge exc 63mm but n.exc 100mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rolled/rammed to a true surface, complete all as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25cm or less, complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level), complete all as directed.

S&F machine pressed precast cement concrete blocks (interlocking pavers) any shape & size confirming to IS-15658-2006 of 60mm thick M-35 Grade with 6mm top layers of ante abrasive rubberised material laid over and including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand, complete all as specified and as directed.

Providing and laying at or near ground level, Factroy made, Kerb stone of M-25 Grade Cement Concrete in position to the required line level and Cunvature jointed with Cement Mortar 1:3, including making Joints with or without grooves, including making drainage opening, complete all as specified and as directed by Engr-in-Charge.

Surface excavation n.exc 30 cm deep & averaging 15 cm deep getting out in any type of soil, complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed.

Returning,filling in,including spreading,levelling,watering and well ramming in layers n.exc 25cm each layer in hard/dense soil, complete all as specified and as directed.

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as directed.

M&L PCC 1:4:8 type D2 (using 40 mm graded aggregate) in foundation filling and mass concrete etc., complete all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course,well bonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses, complete all as specified and as directed.

M&L for providing RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in beams, lintel up to 1.5m clear span, lintel bands etc incl form work, complete all as specified and as directed.

M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3, complete all as specified and as directed.

M&L 50mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection and like laid in alternate bays, including filling of Joints with bitumen fillers, without using extra cement, complete all as specified and as directed.

M&L for keyed pointing in CM 1:3 to Jodhpur type regular coursed masonry, complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:6 finished even and smooth without using extra cement over stone wall surfaces, complete all as specified and as directed.

M&L for preparation new plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation new plastered surfaces of ceilings and applying three coats of white wash, complete all as specified and as directed.

M&L for two coats of cement base paint on new pointed/plastered surfaces of walls including preparation of new surfaces over a coat of primer, complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregates) as in sub floors/base floors under tiles as in levelling course etc., complete all as specified and as directed.

M&L for Non-skid Coloured Ceramic tiles (premium quality) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer in CM1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson

M&L Glazed ceramic coloured tiles (premium quality) of size 450 x 350 x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 10mm thick plaster in CM 1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson

S&F Solid PVC door frames factory made of size 50x47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S&F for 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with neat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification of drawing, complete all as specified and as directed.

M&L for fabrication of louvered aluminium ventilators fabricated with anodized aluminum rectangular section weighing 0.55 Kg/m in frame & other section with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing half portion & half bottom portion should be fixed with glass panes etc all as per sample kept in GE office & fixed in position, complete all as specified and as directed. (Note : Glass pane & stainless steel wire cloth shall be measured & paid separately)

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of appertuer 1.40 mm fixed fixed with tinned tacks or galvanized wire staples, complete all as specified and as directed.

S&F for sheet glass of ordinary quality, 4mm thick, area of each pane not exceeding 0.5Sqm and glazing with aluminium beading in aluminium frame, complete all as specified and as directed.

S&F butt hinges, medium weight ,stainless steel of 100mm long size and fixed, complete all as specified and as directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, 150mm long, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150mm long size, fabricated type, anodised, complete all as specified and as directed.

S&F for aluminium alloy, anodised, sliding door bolt, 250mm long, with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including taking down of old bolt, complete all as specified and as directed.

M&L for cutting chases in brick walls for concealed water tubing and making good to facing where required and pointing in position in CM(1:3), cutiing n.exc 10cm girth, complete all as specified and as directed.

S&F GI tubing 15mm bore, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F GI tubing 20mm bore, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F Bib tap,15mm bore, fancy type, brass chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. Make : Jaquar Cat No. QQT-7037 or equivalent in Kohler/ Cera as approved by GE

S&F Angle valve,15mm bore, fancy type, brass chromium plated, concealed type, with long shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. Make : Jaquar Cat No. QQT-7053 or equivalent in Kohler/ Cera as approved by GE

S&F Angle cock cast copper alloy chromium plated 2 in 1 complete (all as per sample), complete all as specified and as directed. Make : Jaquar Cat No. QQT-7041 or equivalent in Kohler/ Cera as approved by GE

S&F Pillar tap, brass, 15mm dia, with capston heads, chromium plated, screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin, complete all as specified and as directed.

PVC connection, 15mm size, with PTMT nuts, of length 450 mm long including taking down of existing old pipe, complete all as specified and as directed.

S&F Vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, including PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

PVC flushing cistern, low level,10 litres capacity , valveless, syphonic action type, white, with inlet, ball valve, float, handle, flush pipe of polythlene of low or high density or PVC, 32mm dia, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

S&F Vitreous china urinal, bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), white,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections and fixed, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

S&F Vitreous china wash hand basin, white, flat back, size 550 x 400 mm, with and including painted new brackets, waste coupling, waste pipe of 32 mm dia low density polythelene (LDPE) pipes of pressure rating 4 Kgf/sqcm, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

S&F Towel Rail, brass chromium plated. D- type, 600mm long between flanges fixed, complete all as specified and as directed. Make : Jaquar Cat No. ACN-1111SM or equivalent in Kohler/ Cera as approved by GE

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms) Make : Sintex/ Rotex/ Polycon

S&F for PVC (SWR) pipes, 75mm bore, single socketed, in any length, with rubber ring joints, laid in trenhes or in floor, complete all as specifed and as directed.

S&F for PVC (SWR) pipes, 75mm bore, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specifed and as directed.

S&F for PVC (SWR) pipes, 110mm bore, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specifed and as directed.

S&F for PVC (SWR) bends, 75mm bore, complete all as specifed and as directed.

S&F for PVC (SWR) bends, 110mm bore, complete all as specifed and as directed.

S&F for PVC (SWR) vent cowl of 110mm bore, complete all as specifed and as directed.

S&F for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specifed and as directed.

M&L for bedding to drain pipes 150mm dia including packing under, and haunching in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) against the side of SWG after they are laid and tested, complete all as specifed and as directed.

M&L for 150mm bore SWG drain pipe, of grade 'A' laid in trenches and jointed in CM 1:1 including testing etc., complete all as specifed and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in surfaces channel and drain finishing surfaces even and smooth without using extra cement, complete all as specifed and as directed.

Water proofing treatment for roofs in the following stages, complete all as specifed and as directed :- (a) First Course : M&L 10mm thick plaster in cement mortar 1:3 with water proofing compound complete. (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS-3384 @ 0.30 Ltr/Sqm. (c) Third Course : One coat of bonding material using blown type bitumen confirming to IS-702 grade 85/25 @ 1.20 kg/sqm. (d) Fourth Course : A layer of APP modified polymeric membrane centre core of 100 micron HMHPDE, outer film 20 micron each, thickness 2.00 mm having weight 3.0 Kg/Sqm. (e) Fifth Course : a coat of bonding material using blown type bitumen confirming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm. (f) Sixth Course : 40 mm thick PCC (1:2:4) padding, well compacted using 20 mm graded aggregate of curshed stone with V-shaped groove of 10 mm depth filling with mastic bitumen. Size of PCC panel with grooves shall not be exceeding 0.40 Sqm.

E/M Work : Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, (ISI Marked) (class V conductor), in and including PVC concealed conduit (MMS), (ISI Marked) not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover ((ISI Marked) hylem sheet and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed. :- (a) One light/ Ceiling Fan point controlled by one, one way switch

S&F switch flush type single pole one way 6 Amp (ISI Marked), complete all as specified and as directed.

S&F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complete all as specified and as directed.

S&F LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable, complete all as specified and as directed. Make :Crompton/ Havells/ Bajaj.

S&F street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.50 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable, complete all as specified and as directed. MAKE : Havells/ Philips/ CG.

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 4 way, Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface, complete all as specified and as directed.

S&F MCB Single pole 5 to 30 Amp, 10 kA, "C" series, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

S&F MCB SPN 40 Amp, 10 kA, (ISI Marked), complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit, RCC cover etc., complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 10 sq 2 core in service connection, complete all as specified and as directed. Make : Polycab/ Havells/ Finolex

S&F socketed stepped type electronic fan regulator ((ISI Marked)) flush type Make : Legrand/ ABB/ L&T/ Schneider/ HPL

"Fixing only" ceiling fans 230V, 1200mm sweep and making connection with PVC cable from ceiling rose to fan. Make : Bajaj/ Havells/ Crompton Note : Items will be issued in Schedule B

Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount