Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.7 LAdmitted-Finance | ₹45.7 L | L1 | Admitted-Finance |
| 2 | L2₹49.3 L+₹3.6 L (7.85%)Admitted-Finance | ₹49.3 L+₹3.6 L (7.85%) | L2 | Admitted-Finance |
| 3 | L3₹50.4 L+₹4.7 L (10.4%)Admitted-Finance | ₹50.4 L+₹4.7 L (10.4%) | L3 | Admitted-Finance |
| 4 | L4₹50.4 L+₹4.8 L (10.4%)Admitted-Finance | ₹50.4 L+₹4.8 L (10.4%) | L4 | Admitted-Finance |
| 5 | Rejected-Technical 05 PASCHIMSAGAR DIGLIPUR PASCHIMSAGAR NORTH AND MIDDLE ANDAMAN ANDAMAN NICOBAR 744202 | NORTH AND MIDDLE ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | - | - | Rejected-Technical Rejected due to not fulfill NIT criteria |
| Sl No | Description | Qty | Unit | M/S JALALUDDIN AHMED L1 | M/S RUSTAM ALI L4 | M/S SONITPUR BUILDERS L2 | M/S IMRAN ALI L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of mangalore pattern of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. | 337 | Sqm | 980 ₹3,30,260 Lowest | 1,160 ₹3,90,920 | 1,200 ₹4,04,400 | 1,160 ₹3,90,920 |
| 2.00 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws and curved in edge etc., including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. | 33.2 | Sqm | 950 ₹31,540 | 990 ₹32,868 | 900 ₹29,880 Lowest | 980 ₹32,536 |
| 3.00 | S&F MS steel work in (MS round/square/rectangular pipe,angle) posts,truss ,purlin and water tank stagging including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 850 | KG | 160 ₹1,36,000 Lowest | 170 ₹1,44,500 | 168 ₹1,42,800 | 175 ₹1,48,750 |
| 4.00 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 635 | Kg | 170 ₹1,07,950 | 172 ₹1,09,220 | 169 ₹1,07,315 Lowest | 170 ₹1,07,950 |
| 5.00 | S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters; trusses, purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 1,270 | Kg | 165 ₹2,09,550 Lowest | 174 ₹2,20,980 | 175 ₹2,22,250 | 175 ₹2,22,250 |
| 6.00 | S&F Fe 410-W(Gde-E250) joist , angle or tee section, fixed independlty, without connecting plates etc as in purlins and tank staging including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 180 | Kg | 170 ₹30,600 | 175 ₹31,500 | 165 ₹29,700 Lowest | 170 ₹30,600 |
| 7.00 | Erection Fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. | 250 | Kg | 60 ₹15,000 | 40 ₹10,000 Lowest | 45 ₹11,250 | 55 ₹13,750 |
| 8.00 | S&F Fe 410-W (Gde-E-250) quality mild steel plate plain or chequered,5 mm thick or over in thickness including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 25 | Kg | 170 ₹4,250 Lowest | 175 ₹4,375 | 182 ₹4,550 | 180 ₹4,500 |
| 9.00 | S&F mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. | 10 | KG | 200 ₹2,000 | 185 ₹1,850 | 184 ₹1,840 | 180 ₹1,800 Lowest |
| 10.00 | S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm | 15 | Kg | 200 ₹3,000 | 185 ₹2,775 Lowest | 185 ₹2,775 Lowest | 185 ₹2,775 Lowest |
Tender Value
₹45.9 L
EMD Value
₹91,900
Closing Date
28 Aug 2026, 6:00 pmClosed
GE(North)Tezpur
GE(North)Tezpur Solmara PO-Dekargaon Dist - Sonitpur Assam - 784501
SPL REPAIRS OF BLDG NO. T-35 AND T-36 (TOILET BLOCK) OF 27 RAJPUT AND T-14 (OR LIVING) AT B SECT OF 288 MED REGT (MIL STN THAKURBARI) UNDER GE (N) TEZPUR
2026_MES_781887_1
GE(N)/TEZ/2026-2027/8234
Open Tender
Civil Works
Item Rate
180 days
GE(North)Tezpur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE (North)Tezpur
₹91,900
19 Sept 2026
31 Jul 2026
29 Aug 2026
31 Jul 2026
28 Aug 2026
14 Aug 2026
31 Jul 2026 - 14 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of mangalore pattern of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. | 337 | Sqm | - | - |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc., including dismantling of old unserviceable existing roof sheet of any type complete all as specified and directed. | 33.2 | Sqm | - | - |
| 3 | S&F MS steel work in (MS round/square/rectangular pipe,angle) posts,truss ,purlin and water tank stagging including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 850 | KG | - | - |
| 4 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 635 | Kg | - | - |
| 5 | S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters; trusses, purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 1,270 | Kg | - | - |
| 6 | S&F Fe 410-W(Gde-E250) joist , angle or tee section, fixed independlty, without connecting plates etc as in purlins and tank staging including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 180 | Kg | - | - |
| 7 | Erection Fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. | 250 | Kg | - | - |
| 8 | S&F Fe 410-W (Gde-E-250) quality mild steel plate plain or chequered,5 mm thick or over in thickness including dismantling of old unserviceable existing truss of any type complete all as specified and directed. | 25 | Kg | - | - |
| 9 | S&F mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. | 10 | KG | - | - |
| 10 | S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm | 15 | Kg | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
TenderDocuments8234.pdf
Tender Documents • 1.94 MB
BOQ_875924.xls
BOQ • 2.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .