Providing Electrification in the newly constructed building for the Vanitha Souhrtha Centre at Medical college Junction under City Corporation Office Thiruvananthapuram

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC ivory Conduit of minimum size 20mm conforming to IS 9537 Part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade including providing switch board main and continuous earthing with 1.5 sqmm green coloured FR wire required quantity of copper earth socket, brass bolt and nuit crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B) modular accessories

Single control light point with 6A, 3 Plate ceiling rose

Twin control light point with 6A, 3 Plate ceiling rose

Single control light point without ceiling rose

Single control ceilding fan point 6A, 3 Plate ceiling rose and with socket typped electronic regulator.

Combined plug point with 6A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independent plug.

Supply, fabrication, conveyance and fixing the following sizes of B class GI Pipe bent to shape/cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zink chromate primer, making good the damages, colour washing etc as required 25 mm dia with HG company fabricated clamp.

Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required. 1200 mm 1X20W LED Lamp with box type fixture

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100 V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

1200 mm sweep (category B) 5 star rated

MR 1193 400 mm sweep Wall mounting fan

Charges for cutting holes suitable for accommodating exhaust fancs of sizes up to 305 mm sweep including plastering, colour washing etc. as required.

200 mm sweep light duty exhaust fan in plastic body with self opening lowers working on 230V single phase A/C supply.

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes

1.50 sq mm 2 run

1.50 sq mm 3 run

1.50 sq mm 4 run

2.50 sq mm 2 run

4.00 sq mm 2 run

Supply, laying of one number PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil) core sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exeeding 60 cms, making good the damages, colour washing etc. required.

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 3.5 core 25 sq mm

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 63/50 mm or nearest size

DBR 2348 Strainght throuch cable jointing kit with sat resin compoun with ferrulis for 3.5 x 25 sq mm 1.1. KV grade cable.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 6A 3 pin plug top

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 16A 3 pin plug top

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 6A universal socket

Supply and Fixing the following piano type swith/socket on the existing box cover including connection etc as required. 5/6 A amp switch

Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required. 15/16 amp switch

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without MCBIRCCB/Isolator ) 4 way (4+12) Double door.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing following rating, double pole, 240 volts, residual current circuilt breaker (RCCB) having asensityvity current up to 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

(MR1183) 36/40 W 4000 lumen LED, IP66 street light fittings with Aluminium housing stove enameled CRCA sheet, Steel reflector cover, acrylic cover complete with THD <10%, power factor>0.98, RoHS complaint duly wired up for use on 230 V ac supply

Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised alumi8nium body, epoxy powder coated, heat resistant prismatic glass cover suitable for 9 W CFL to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheather 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required

Supplying and fixing brass batten/ angle holder including connection with 10 W LED bulb as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and providing the fallowing sizes of cast iron gully trap with covering at the top of the inspection cahmber of earth pit as required.

300x300x6 mm cast iron gully trap with covering

Supply and providing test joint for the earthing system using 2 Nos. of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required

2 x 25 x 3mm GI strip

Supply and providing earth lead from the test joint to the earth electrode using following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

25 x 3mm GI strip

Supply and conveyance installation testing and commissioning of single phase air conditioners of following types conforming to relevant IS fitted with hermitically sealed comporessor operation on refigerant R-22/nn CFC refigerent suitable for operation on 230V, 50 Hz single phase A/C supply capable of performing functions a) Cooling, b) Dehumidifying c) Air circulating d) Filtering

1.5 TR High wall mounting split type (invertor type) M/S O General make or equilant make`

Supply 4 KVA Voltage stebilizer for split type AC unit with Voltage Range 175-275 V and out put range of 210-240 V (Guard equivalent make)

Supply and providing the following size soft drawn copper pipe for extending the pipe between out door and indoor unit, including insulating the pipe using rubbrised form sleeve 10mm thick, brazing leak testing etc, (for extending length of pipe beyound standard length supplied with the 16 mm (5/8) dia, 22 guage soft drawn copper 10 mm thick rubberised form sleeve 10 mm thick, brazing, leak testing etc. (for extending lwngth of pipe beyond standard length supplied with the unit)

16mm (5/8) dia 22 guage soft drawn copper pipe insulated uding 10mm thick rubebrised form sleeve

Supply and providing brackets.

Supply and installation off grid solar system for 5 KW including KSEB charge.

High performance CMOS sensor and high Resolution with built in 3.6 mm lens Night Vision weather proof IR Dome Camera Brand Cpplus

High performance CMOS sensor and high Resolution with built in 3.6 mm lens Night Vision weather proof IR Dome Camera Brand Cpplus

Camera box

Audio Video cable

Cat 6 cable

No. 2 U track

Digital Video Recorder 4 Channel real timerecorder with real time display- can be connect and record upto 4 Camera. Brand- Cpplus

1000 GB Surveillance Sata Hard disk Brand WD

12V Power supply unit

BNC Connector

DC connector

4 port electric plug and pin socket brand ANCHOR

Supply and installation of (3+1) cable for camera

18.5" HD LED Monitor with HDMI, Brand DEL

HDMI cable

Adjustable wall bracket

SMD LED Scrolling board

Philips AJ 4000 12 FM radio BLUE

PVC pipe 20 mm

LED TV 138.78 cm 55 inch

Supply laying and clamping of 1 no PVC insulted and PVC sheathed armoured power cable 1.1 KV grade of the following sizes using clamps noted s along with the cables, spacing of cables nor exceeding 60 cm making good the damages coloud washing etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and drawing bare copper conductors of the

2.00 mm copper conductor (14 SWG)

3.15 mm copper conductor (10 SWG)

Supply and laying bare earthing conductors of the following

3.15 mm copper conductor (10 SWG)

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of following size suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

S & F switch disconnector unit (isolator) complete with handle assmebly, door inter lock and padlocking arrangement of the following ratings. 63A

or Supply and fixing the following accessories in the

63A 415V Backlite fuse fittings

63A 415V 2 way neutral link mounted on DMV/SMC base

Amount remitted to KSEB for regularising the additional load (actual amount will be reimpersed on production of original receipts)