Canal covering work of Lohariyasal canal from K.M. 2.88 to K.M 3.53 in Vidhansabha Kaladhungi Distt- Nainital

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Slip clearance (by manual means) of loose earth and other small loose materials including disposal as directed by the Engineer-in-charge.

Dismentliing Reinforced Cement Concrete pavnent (v.r.b.) crossing

Dismentling old stone masonary in cement mortar b/ppt of mr.

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix 1:2:4

R.R. Stone masonry in (1:3 ) cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204

Pointing on stone work with cement mortar 1:3 (1 cement :3 fine sand) Flush/ Ruled pointing

Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604 1202 & 1204,

15 mm thick Cement (1:4) Plaster on brick masonary gule

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Supply fitting and placing TMT bar reinforcement (Fe 415)in substructure complete as per drawing and technical specification clauses 1002, 1005, 1010,and 1202

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Erection of Steel Truss (Girder) Bridge (up to 60m span) as per drawing with required camber including cartage of fabricated parts from the place of stack near site including submission of launching plan by the contractor, (duly vetted by a recognised reputable institution/ consultant ifrequired) and approved by the engineer-in-charge. Service bolts to used shall be of approved make. The rate including of cost of all labour, T&P, equipments, civil work and consumables, cost of arranging, fabricating,errecting and dismantling of erection scheme including the cost of its designing, revising, supervision by contractor's designeer at site during erection, also including cost of all safety measures and necessary insurances of bridge and labours for proper completion of the work as per MORTH specification no. 1905 with due regard of mansoon and as per directions of the engineer-in-charge

Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification.

Dewatering from foundation of abutments and wing walls including wages of operator and fuel including supply of all material, labour and T&P etc. required for proper completion of the work.

Providing and laying of Empty Cement Bags ( Gunny Bags) filled with local sand and tightened using sutli and carriage upto site including preparing subgrade before placing in position, also including supply of all material, labour, T&P etc required for proper completion of the work

Providing and Laying Reinforced Cement Concrete Pipe NP4 as per Design in Double Row Providing and laying reinforced cement concrete pipe NP 2 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per Clause 1106 FOR 500 mm dia pipe

Sand Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 Sand filling around hume pipe

Disposal of moorum / building rubbish / malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer- in- charge.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality EHD - 35 Circular shape 560 mm internal dia

Cement bearing Plaster (1:3) on top of stone masonary

Yogesh Tewari Contractor