15th finance Commission funds

Name of the Work: Construction of Village Health Clinic at Gudala (V) of Allavaram (M) Est. Rs.36.00 Lakhs Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Supply and placing of the M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand (unscreened) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Brick masonry 230 mm thick for panel walls in superstructure with CM (1:6) proportion using II nd class country bricks of size 23x11x7 cm from approved source having crushing strength not less than 35kg/sqcm including cost and conveyance of all materialslike cement, sand, bricks, water etc., to site, including seignorage charges, sales and other taxes on all materials and all operational, incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary, lift charges, curing etc., complete for finished item of work. FOR BASEMENT

Brick masonry 230 mm thick for panel walls in superstructure with CM (1:8) proportion using II nd class bricks of size 23x11x7 cm from approved source having crushing strength not less than 35kg/sqcm including cost and conveyance of all materials like cement, fine sand(unscreened), bricks, water etc., to site , including seignorage charges, sales and other taxes on all materials and all operational, incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary, lift charges, curing etc., complete for finished item of work complete. FOR SUPER STRUCTURE

Reinforced Brick Masonary walls of 11.5cm in CM(1:6) using FlyAsh/2nd cl bricks having a crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges for finished item of work as per SS 509

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials.

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Flooring with Non-skid ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including etc., complete for finished item of work.

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work

Flooring with precast Terrazo tiles of 10mm thick set over base coat of cement mortor(1:8) 12 mm thick over CC bed alreay laid or RCC roof slab,including neat cement slerry of honey like consistency [email protected] kgs per sqm & jointed neatly with cement mixed with pigment of matching shade of full depth including cost of all material like cement ,sand and water and tile ,Etc,complete item of work

Plastering with CM (1:5) to 12mm thick including cost and conveyance of all materials and all labour charges,mixing mortar, scaffolding, lift charges, curring etc.,for finished item of work.

Plasteing with CM 2 coats , (1:4) 12mm thick and CM (1:4) 8mm thick including cost and conveyance of all materials and labour charges etc complete

Ornamental Plastering 8 mm thick for Ceiling in CM (1:3) including cost and conveyance of all materials and all labour charges etc., completed.

Cost and supply of MS grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc. complete

Painting to new walls with 2 coats of plastic emulsion paint over a priamry coat of water based Cement Primer Interior Grade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of plastic emulsion paint over a priamry coat of water based Cement Primer Exterior Grade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand over primary coat of wood primer after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials,cost of brushes, water to site, etc, and labour charges,curing etc., complete for finished item of work.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,

Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded, cutting, bending to required size and shapes placing in position with cover blocks of approved size and binding wire of 20 SWG forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approroved sources to site of work with all taxes, including cost of binding wire, cover blocks, chains, overlaps, spacess dowels wastage etc., and all operational charges adn all labour chareges etc.,compete for finished item of work.

Supply and fixing of Sal wood Door Double Shutter fully panelled of the 1.20x2.10m size with frame made of well seasoned Sal Wood scantlings of size 100x75mm and shutter made of side railes of 125x38mm, top rail 125x38mm and bottom rail 125x38mm and intermediate rails of 125x38mm and pannels - 8Nos are of 25mm thick as per approved design with fixtures of 6Nos of 9" 'Z' hold fasts, 300mm long Aluminium aldrop - 1No, 125mm long Butt hinges 6Nos, Door stopper 1No, 150mm long Tower bolt 1 No, 200mm long tower bolts 1 No, aluminium fancy handles 150mm long 1 No with necessary screws complete including cost and conveyance of all materials and all labour charges etc.,complete for finished item of work. as per specification (APSS No 1001&1002) - of size 1.20x2.10m

Supply and fixing of Sal wood Door Double Shutter fully panelled of the followiing size with frame made of well seasoned Sal Wood scantlings of size 100x75mm and shutter made of side railes of 125x38mm, top rail 125x38mm and bottom rail 125x38mm and intermediate rails of 125x38mm and pannels - 8Nos are of 25mm thick as per approved design with fixtures of 6Nos of 9" 'Z' hold fasts, 300mm long Aluminium aldrop - 1No, 125mm long Butt hinges 6Nos, Door stopper 1No, 150mm long Tower bolt 1 No, 200mm long tower bolts 1 No, aluminium fancy handles 150mm long 1 No with necessary screws complete including cost and conveyance of all materials and all labour charges etc.,complete for finished item of work. as per specification (APSS No 1001&1002) - of size 1.05x2.10m

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge. Two tracktwo panels sliding window made of (small series)frame 52 x 44 mm &sash 32 x 60 mmboth having wallthicknessof1.9±0.2mmandsingle glazing bead of appropriate dimension. (Area of windowupto 1.75sqm)

Providing and fixing factory made uPVC white colour fixed glazedwindows / Ventilators comprising of uPVC multi-chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.

Supply and fixing of Flush Door shutter of size 0.90 x 2.10mt with block board type with commercial ply onboth faces30 mm thick with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges as per specifications (APSS NO.1001 & 1002)

Supply and fixing of Flush Door shutter of size 0.80 x 2.10mt with block board type with commercial ply onboth faces30 mm thick with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges as per specifications (APSS NO.1001 & 1002)

Supplying and fixing of false ceiling using Plaster of paris Boards 12 mm thick with standard GI ceiling angles, sections perimeter channels including cost and conveyance of all materials and labour charges etc complete

Providing and applying water proof wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation, applying one coat of cement primer of interior grade-1 and two coats of poy-urethane paint (MRF) of light green or light blue colour with 1mm thickness with anti fungal and anti bacterial chemical resistance durable and non particle shedding including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors for ceiling of rooms.

Supply and Fixing of 25mm dia 1.80/2.00mm thick PVC pipe (ISI MARK) concealed in Roof Slab with all required accessories including masonary work and labour charges etc., complete.

Supply and Fixing of 20mm dia 1.5mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and Modularplate covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and Fixing of 16A 3pin and 6A 3pin plug socket and 16A switch control duly recessed in wall with metal deep box of covered with modular covering plate including earth connections and all labour charges etc., complete.

Supply and run of 2 of 22 /0.3mm (1.5 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth Continuty inlcuding all labour charges etc., complete.

Supply and run of 2 of 56/0.3mm (4 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories.

Supply and erecting step type Modular regulator for ceiling fans 1200mm sweep complete erected on existing board.

Supply and fixing of 20W/24W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes: Wipro / Phillips /Lighting Technologies(LT) / GEVenture / Crompton / Bajaj / VIN /Halonix/Jaquar/HPL/Havells/GM b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).

Supply and fixing SPN Distribution board with IP-20 protection (Metal Door) suitable for single phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.

Supply and Transportation of 0.5 HP Single phase ISI Mono block CI body motor pumpset (25x25mm). Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 as per SSR

Supply the following Hot dip galvanised metal boxes

Supply and fixing the following cover frames 12 modular

cover frames 8 modular

cover frames 6 modular

cover frames 2 modular

Supply and fixing of 12W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, Luminaire performance complies to IS 10322 (Part 5 / Sec-2) .etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete

Supply and fixing of three phase energy meter, 240 V AC, 50 HZ as per IS13010 with 2.5-5 / 5-10/10-20 Amps range wth 200% over load capacity complete with connection etc., complete on the existing board.

Supply and Run of 2 of 6 Sq.mm WPSC (Whether Proof Single Core) Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains.

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm

Supplying & Fixing 75 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing ne

Supply & fixing of tested NP bib taps at all levels of 12.70mm dia of Indian make 400g first quality including cost & conveyance of all materials, labour charges for finished item of work, and all taxes complete for all floors

Supplying & Fixing 110 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc. complete

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials and labour charges etc complete

22.20mm OD pipe(20mm DN) SDR 11

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook with 7 years warranty Chrome plated

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop;½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.(38. SoR FOR BORE WELL DRILLING RATES FOR THE YEAR 2025-26 (S.No1))

Supplying & fixing stainless steel sink size 20" x18" x 8 "(508x457.2x203.2mm) 1 mm thick with accessories

Supply & Fixing of towel rail 24'' Jaquar make Continental series, Chrome finish with 7 years warranty

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & OG Soils ( SS 20-B) including all operational incidental l/c such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work including seignerage charges excluding dewatering charges etc., complete for Septic tank soak pit and sump.(APSS No. 308) for septic tank

Plain Cement Concrete (1:4:8) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but excluding unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)(CSSR) for septic tank

Plain Cement Concrete M 20 grade nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work

Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd Class for basement including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not less than 50 kg/sqm for walls for alround baffel wall

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45X45cm including c/c of all m/l like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work (APSS No. 901 & 903).

Reinforced Cement Concrete M-20 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for 100 mm thick slab over tank

Supplying and fixing of 110mm dia SWR/ PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work