Kottayam Muncipality ( Kumaranalloor Zonal ) 2023-24-Interlocking of SNDP anganvadi road,Paravanparambu thaipparamb road and Edavazhikkal Nalukettu pathway in ward no 11

Amount

Interlocking of edavazhikkal nalukettu pathway

4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material

OD319469/2023-2024:Providing and laying factory made chamfered edge cement concrete paver blocks in foot path ,parks,lawns,drive ways or light traffic parkings etc of required strength, thickness , size and shape made by table vibratory method using PU mould ,laid in required strength ,thicknesws&size/shape,made by table vibratory method using PU mould laid in required colour and pattern over 50mm thick compacted bed of coarse aggregate,compacting and proper embedding /laying of interlocking paver blocks into the bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand and cutting of paver blocks into the bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand and cutting of paver blocks as required size and pattern ,finishing and sweeping extra sand complete as per direction of Engineer in charge 80mm thick C.C paver block of M-30 grade with approved colour design and pattern

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

SNDP ANGANVADY ROAD CONSTRUCTION OF ROAD

OD319505/2023-2024:Filling with Quarry muck filling up low lying and water logged areas with local material/quarry muck spreading in layers leveling the top at site and consolidation by ramming etc complete for improving the CBR value of subgrade

4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material

OD319478/2023-2024:Providing and laying factory made chamfered edge cement concrete paver blocks in foot path ,parks,lawns,drive ways or light traffic parkings etc of required strength, thickness , size and shape made by table vibratory method using PU mould ,laid in required strength ,thicknesws&size/shape,made by table vibratory method using PU mould laid in required colour and pattern over 50mm thick compacted bed of coarse aggregate,compacting and proper embedding /laying of interlocking paver blocks into the bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand and cutting of paver blocks into the bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand and cutting of paver blocks as required size and pattern ,finishing and sweeping extra sand complete as per direction of Engineer in charge 80mm thick C.C paver block of M-30 grade with approved colour design and pattern

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

parvanpraambu thipparambu roao construction

4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material

OD319367/2023-2024:Providing and laying factory made chamfered edge cement concrete paver blocks in foot path ,parks,lawns,drive ways or light traffic parkings etc of required strength, thickness , size and shape made by table vibratory method using PU mould ,laid in required strength ,thicknesws&size/shape,made by table vibratory method using PU mould laid in required colour and pattern over 50mm thick compacted bed of coarse aggregate,compacting and proper embedding /laying of interlocking paver blocks into the bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand and cutting of paver blocks into the bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand and cutting of paver blocks as required size and pattern ,finishing and sweeping extra sand complete as per direction of Engineer in charge 80mm thick C.C paver block of M-30 grade with approved colour design and pattern

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

Bidder Name

sunil shah k k