Providing and Constructing Hall, Shed, Library , Furniture , Electric Work and Paving Block Various Areas at Tharad Nagarpalika Dist: Vav-Tharad Grant:- MP Rajya Sabha-2024-25 and 2025-26

No. But may be estimated

more or less quantities

In Figure in Words

1.0 202.00 Excavation for foundation up to 1.50 m depth including sorting out & stacking of useful 122.94 Rupees One Hundred TwentyTwo Cu.M

materials and disposing of the excavated stuff upto 50 mt lead. (A) Loose or soft soil. Paise NinetyFour Only

2.0 25.40 Excavation for foundation for depth 1.50 m to 3.00 m. including sorting out & stacking 136.30 Rupees One Hundred ThirtySix Cu.M

of useful materials and disposing of the excavated stuff upto 50 mt lead. (A) Loose or Paise Thirty Only

3.0 36.00 Box cutting the road surface to proper slope and camber for making a base for road work 215.62 Rupees Two Hundred Fifteen Cu.M

including removing the excavated stuff and depositing on the road side slope as directed Paise SixtyTwo Only

upto 50Mt.lead. (Mannually)

4.0 53.00 Providing and laying plain cement concrete 1:4:8 (1: Cement 4: Coarse sand 8: Crushed 2780.37 Rupees Two Thousand Seven Cu.M

stone aggregates 40mm nominal size) and curing complete excluding cost of form work Hundred Eighty Paise ThirtySeven

in ( A) Foundation and plinth Only

5.0 9.00 Brick work using common burnt clay building bricks having crushing strength not less 4245.09 Rupees Four Thousand Two Cu.M

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine Hundred FourtyFive Paise Nine

sand)(B) Conventional Only

6.0 136.50 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations 136.92 Rupees One Hundred ThirtySix Cu.M

etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by Paise NinetyTwo Only

ramming and watering.

7.0 13.00 Brick work using common burnt clay building bricks having crushing strength not less 4491.75 Rupees Four Thousand Four Cu.M

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine Hundred NinetyOne Paise

sand) (B) Conventional (upto 10 ton). SeventyFive Only

8.0 42.80 Brick work using common burnt clay building bricks having crushing strength not less 4496.05 Rupees Four Thousand Four Cu.M

than 35 kg./Sq.Cm. in Super structure above plint level up to two level in Cement Mortar Hundred NinetySix Paise Five

1:6 (1- Cement : 6 -fine sand)(B) Conventional (Ground Floor) Only

9.0 20.10 Brick work using common burnt clay building bricks having crushing strength not less 4538.16 Rupees Four Thousand Five Cu.M

than 35 kg./Sq.Cm. in Super structure above plint level up to two level in Cement Mortar Hundred ThirtyEight Paise Sixteen

1:6 (1- Cement : 6 -fine sand)(B) Conventional (First Floor) Only

10.0 21.60 Providing and laying controlled cement concrete M.250 for curing complete including cost 4371.28 Rupees Four Thousand Three Cu.M

of formwork and reinforcement for reinforced concrete work in (A) Foundations, Hundred SeventyOne Paise

footings,Base of columns and Mass concrete RCC FOOTING TwentyEight Only

11.0 2.00 Providing and laying controlled cement concrete M.250 for curing complete including cost 6036.77 Rupees Six Thousand ThirtySix Cu.M

of formwork and reinforcement for reinforced concrete work in (A) Foundations, Paise SeventySeven Only

footings,Base of columns and Mass concrete (Pedastal) RCC COLUMN up to Plinth

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

12.0 7.00 P&L controlled cement concrete M-200 for RCC works including the cost machine mixing, 8762.76 Rupees Eight Thousand Seven Cu.M

vibrating, scaffolding, incl. cost of form work / shuttering but excluding cost of Hundred SixtyTwo Paise

reinforcement etc. complete up to RCC COLUMN SeventySix Only

13.0 8.20 Providing and laying Controlled cement conerete M-250 and curing complete incuding the 6686.20 Rupees Six Thousand Six Cu.M

cost of form work and but excluding the cost of reinforcement for reinforced concrete Hundred EightySix Paise Twenty

work in : (d) Columns, pillars, posts and struts up to floor two level. (Ground Floor) Only

14.0 2.70 P&L controlled cement concrete M-200 for RCC works including the cost machine mixing, 8803.16 Rupees Eight Thousand Eight Cu.M

vibrating, scaffolding, incl. cost of form work / shuttering but excluding cost of Hundred Three Paise Sixteen Only

reinforcement etc. complete up to RCC COLUMN (F.F)

15.0 1.20 P&L controlled cement concrete M.200 and curing complete including the cost of 6986.17 Rupees Six Thousand Nine Cu.M

formwork but excluding the cost of reinforcement for reinforced concrete work in RCC Hundred EightySix Paise

LINTEL (G.F) Seventeen Only

16.0 0.50 P&L controlled cement concrete M.200 and curing complete including the cost of 8719.33 Rupees Eight Thousand Seven Cu.M

formwork but excluding the cost of reinforcement for reinforced concrete work in RCC Hundred Nineteen Paise

LINTEL (F.F) ThirtyThree Only

17.0 0.70 Providing and laying controlled cement concrete M.250 and curing complete including the 8879.92 Rupees Eight Thousand Eight Cu.M

cost of formwork and reinforcement for reinforced concrete work in (C) Slabs, landing, Hundred SeventyNine Paise

shelves, Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. (G.F) NinetyTwo Only

18.0 1.70 Providing and laying controlled cement concrete M.250 and curing complete including the 6985.16 Rupees Six Thousand Nine Cu.M

cost of formwork and reinforcement for reinforced concrete work in (C) Slabs, landing, Hundred EightyFive Paise Sixteen

shelves, Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. RCC Only

CHAJJA (G.F)

19.0 0.80 Providing and laying controlled cement concrete M-250 and curing complete including the 6889.21 Rupees Six Thousand Eight Cu.M

cost of form work and but inculding the cost of reinforcement for reinforced concrete work Hundred EightyNine Paise

in : (F) Chhajjas GF TwentyOne Only

20.0 2.75 P&L controlled cement concrete M.200 and curing complete incl. the cost of formwork 8121.41 Rupees Eight Thousand One Cu.M

but excl. the cost of reinforcement for reinforced concrete work in RCC CHAJJA (F.F) Hundred TwentyOne Paise

FourtyOne Only

21.0 9.00 Providing and laying controlled cement concrete M-250 and curing complete including the 6909.41 Rupees Six Thousand Nine Cu.M

cost of form work and but inculding the cost of reinforcement for reinforced concrete work Hundred Nine Paise FourtyOne

in : (C)Plinth Beam Only

22.0 7.20 Providing and laying controlled cement concrete M-250 and curing complete including the 6778.11 Rupees Six Thousand Seven Cu.M

cost of form work and but inculding the cost of reinforcement for reinforced concrete work Hundred SeventyEight Paise

in : (C)Plinth Beam Eleven Only

23.0 2.50 P&L controlled cement concrete M-200 for RCC works including the cost machine mixing, 7086.16 Rupees Seven Thousand Cu.M

vibrating, scaffolding, incl. cost of form work / shuttering but excluding cost of EightySix Paise Sixteen Only

reinforcement etc. complete up to plinth level for BEAMS(F.F)

24.0 0.70 Providing and laying controlled cement concrete M-250 and curing complete including the 6317.55 Rupees Six Thousand Three Cu.M

cost of form work and but exculding the cost of reinforcement for reinforced concrete Hundred Seventeen Paise

work in : (B) Copping FiftyFive Only

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

25.0 1.00 P&L controlled cement concrete M.200 and curing complete including the cost of 9068.79 Rupees Nine Thousand SixtyEight Cu.M

formwork but excluding the cost of reinforcement for reinforced concrete work in RCC Paise SeventyNine Only

COPPING (G.F)

26.0 1.20 Providing and laying controlled cement concrete M-250 and curing complete including the 5700.44 Rupees Five Thousand Seven Cu.M

cost of form work and but exculding the cost of reinforcement for reinforced concrete Hundred Paise FourtyFour Only

work in : (B) Copping

27.0 14.70 Providing and laying controlled cement concrete M.250 and curing complete including the 7366.94 Rupees Seven Thousand Three Cu.M

cost of formwork and reinforcement for reinforced concrete work in (C) Slabs, landing, Hundred SixtySix Paise

shelves, Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. (G.F) NinetyFour Only

RCC SLAB G.F

28.0 7.30 P&L controlled cement concrete M.200 and curing complete including the cost of 6737.71 Rupees Six Thousand Seven Cu.M

formwork but excluding the cost of reinforcement for reinforced concrete work in RCC Hundred ThirtySeven Paise

SLAB (F.F) SeventyOne Only

29.0 4752.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding 77.29 Rupees SeventySeven Paise Cu.M

and placing in position complete upto floor two level TwentyNine Only

30.0 2021.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding 76.21 Rupees SeventySix Paise Cu.M

and placing in position complete upto floor two level TwentyOne Only

31.0 238.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm 701.90 Rupees Seven Hundred One Sq.Mt

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as Paise Ninety Only

per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete

32.0 55.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 402.55 Rupees Four Hundred Two Paise Mt.

30cm length,30cm height and 15cm thick of M200 grade concret as per approved design FiftyFive Only

and including excavation for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

33.0 55.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement 1467.72 Rupees One Thousand Four Sq.Mt

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Hundred SixtySeven Paise

adhesive material including dismentaling of existing flooring and jointed with color cement SeventyTwo Only

slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit

34.0 65.20 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps 1120.36 Rupees One Thousand One Sq.Mts

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Twenty Paise ThirtySix

finishing with flush pointing in white cement. Only

35.0 17.50 P & F flush door shutters, solid core construction with frame of first class hardwood with 1829.74 Rupees One Thousand Eight Sq.Mt

cross board and face veneer or plywood face panels, including anodised alluminium butt Hundred TwentyNine Paise

hinges with necessary screws. (B) Non-decorative type and block board core anodised SeventyFour Only

alluminium butt hinges in flush door shutters (2) 35 mm thick.

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

36.0 35.10 Providing and fixing window having extruded aluminum Colour Powder Coated section 1705.67 Rupees One Thousand Seven Sq.Mt

frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two Hundred Five Paise SixtySeven

track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical Only

member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete

for window

37.0 10.80 P & F window having extruded aluminum Colour anodized section frame main outer size 1713.70 Rupees One Thousand Seven Sq.Mt

63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two Hundred Thirteen Paise Seventy

track member size 61.85 mm x 1.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of Only

0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal Section

no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size

40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section

@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window. Sqm 2471.00 2021.71

38.0 21.60 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1175.56 Rupees One Thousand One Sq.Mt

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation Hundred SeventyFive Paise

with 5 mm thick frosted glass as details etc complete for Ventilation] FiftySix Only

39.0 702.00 P & F Safety grills of required pattern for windows / Door using 16mm dia M.S plished 112.72 Rupees One Hundred Twelve Kg

bars and Rectangular CRC pipes of size 50 x 30 x 2mm at required spacing as per Paise SeventyTwo Only

design and hold fasting with coach bolts including one coat of primer and two coats of

matt finshed oil painting etc complete.

40.0 288.00 P & F Safety grills of required pattern for windows / Door using 16mm dia M.S plished 113.12 Rupees One Hundred Thirteen K.g

bars and Rectangular CRC pipes of size 50 x 30 x 2mm at required spacing as per Paise Twelve Only

design and hold fasting with coach bolts including one coat of primer and two coats of

matt finshed oil painting etc complete.

41.0 348.40 Providing 10 mm. thick cement plaster in single coat for plastering on ceiling and soffits of 177.40 Rupees One Hundred Sq.Mt

stairs upto floor two level and finished even and smooth in (i) Cement mortar 1:3 ( 1 SeventySeven Paise Fourty Only

Cement : 3 sand) Ground Floor (Including White Washing two Coats)

42.0 10.08 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in 10193.77 Rupees Ten Thousand One Qtl.

position and applying a priming coat of read lead paint. (D) In trussses and trussed Hundred NinetyThree Paise

purlins, upto 25 M. span and 15 M. ovarall height. (upto 10 ton). SeventySeven Only

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

43.0 83.00 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L 734.19 Rupees Seven Hundred Sq.Mt

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet ThirtyFour Paise Nineteen Only

washer. filled with white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet. (upto 10 ton).

44.0 288.64 Providing 15mm thick plaster in on brick / concrete wall for interior plastering mala 187.07 Rupees One Hundred Sq.Mt

finished even and smooth (i) Cement Mortar 1:3 ( 1 Cement : 3 sand) for Ground Floor EightySeven Paise Seven Only

(Including White Washing two Coats)

45.0 132.00 Providing 15mm thick plaster in on brick / concrete wall for interior plastering mala 196.42 Rupees One Hundred NinetySix Sq.Mt

finished even and smooth (i) Cement Mortar 1:3 ( 1 Cement : 3 sand) for Ground Floor Paise FourtyTwo Only

(Including White Washing two Coats)

46.0 86.00 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of 1018.88 Rupees One Thousand Eighteen Sq.Mt

cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse Paise EightyEight Only

sand) laid over and jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A) 25mm thick.

47.0 550.60 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work 296.65 Rupees Two Hundred NinetySix Sq.Mt

for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Paise SixtyFive Only

cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete

including White Washing two Coats

48.0 69.80 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded 349.10 Rupees Three Hundred Sq.Mt

stone 20mm nominal size) laid in one layer and finished with a floating coat of neat FourtyNine Paise Ten Only

cement. (B) 50mm thick.

49.0 43.60 Providing, laying and fixing doors and windows granite frame works for horizantal and 1882.03 Rupees One Thousand Eight Rmt

vertical stone slab fitting laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- Hundred EightyTwo Paise Three

coarse sand ) finishing with flush pointing with color mix in white cement. Only

50.0 18.80 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 145.76 Rupees One Hundred FourtyFive Rmt

Paise SeventySix Only

51.0 5.00 Providing, laying and fixing Name plate (Size 0.90 X 0.60 mt.) with required writting letter 5944.86 Rupees Five Thousand Nine Nos

or figures on granite slab stones slab works with black japan paint with with approved Hundred FourtyFour Paise

paint including all materials for painting laid on a bed of 12mm thick cement mortar 1:3 (1- EightySix Only

cement : 3-coarse sand ) finishing with flush pointing with color mix in white cement.

52.0 1.00 Providing, laying and fixing Name plate (Size 0.90 X 0.60 mt.) with required writting letter 4802.85 Rupees Four Thousand Eight Nos

or figures on granite slab stones slab works with black japan paint with with approved Hundred Two Paise EightyFive

paint including all materials for painting laid on a bed of 12mm thick cement mortar 1:3 (1- Only

cement : 3-coarse sand ) finishing with flush pointing with color mix in white cement.

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

53.0 49.00 Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water 606.95 Rupees Six Hundred Six Paise Sq.Mt

proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel NinetyFive Only

of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at

1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm

c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops

incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining

compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp.

as per detail drawing as directed

54.0 125.00 Applying two coats of putty & two coats of primer of approved brand and manufacture on 40.59 Rupees Fourty Paise FiftyNine Sq.Mt

new wall surface to give an even shade including thoroughly brushing the surface free Only

from mortar dropping and other foreign matter and sand papered smooth.

55.0 125.00 Distempeing (Two coats) with oil bound washable distemper of approved brand and 75.50 Rupees SeventyFive Paise Fifty Sq.Mt

manufacture and of required shade on wall surfaces to give an even shade, over and Only

including a priming coat with alkali resistance primer of approved brand after thoroughly

brushing the surface and other foreign matter and also including preparing the surface

even and sand parpered smooth.

56.0 4.00 Providing and fixing double-leaf main entrance door shutter, overall standarad size, 5555.00 Rupees Five Thousand Five Sq.Mt

finished flush/laminated door with approved vision panel, including heavy-duty SS 304 Hundred FiftyFive Only

hinges, SS pull/push handles, mortice lock, hydraulic door closer, door stopper,

tower/flush bolts, door signage, necessary screws, fasteners and all other required

hardware, fittings and accessories, complete in all respects as directed by the Engineer-

in-Charge.

57.0 18.00 Providing, fabricating and fixing individual library study desk of size 1200 × 600 × 750 mm 8360.00 Rupees Eight Thousand Three Nos

with privacy/modesty partition, 18/19 mm BWP plywood/HDHMR or approved equivalent Hundred Sixty Only

board, decorative laminate finish, 2 mm PVC edge band, cable grommet/channel,

necessary hardware, screws, adhesive, cutting, fabrication, labour, transport and

installation complete as per approved drawing and sample.

58.0 2.00 Providing, fabricating and fixing librarian desk of size 1500 × 750 × 750 mm with working 14335.94 Rupees Fourteen Thousand Three Nos

top, modesty panel, lockable drawer/storage arrangement, 18/19 mm BWP Hundred ThirtyFive Paise

plywood/HDHMR or approved equivalent board, decorative laminate finish, 2 mm PVC NinetyFour Only

edge band, telescopic channels, handles, lock, cable grommet, all hardware, fabrication,

labour, transport and installation complete as per approved drawing and sample.

59.0 2.00 Providing and supplying Storage / Book Return Cabinet, made of 18 mm thick pre- 35350.00 Rupees ThirtyFive Thousand Nos

laminated MDF/HDWR board of approved make and shade, with adjustable internal Three Hundred Fifty Only

shelves, separate book-return compartment/opening, lockable shutters, soft-closing

hinges, SS handles, edge banding, skirting/base, necessary hardware, fixing and

installation complete as per approved design and direction of Engineer-in-Charge.

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

60.0 20.00 Providing and supplying ergonomic study chairs for individual desks, with high- 7070.00 Rupees Seven Thousand Seventy Nos

back/medium-back design, moulded backrest and seat, comfortable upholstered Only

cushioning, adjustable seat height, pneumatic gas-lift mechanism, 360° swivel, sturdy

powder-coated metal/nylon base with castor wheels, adjustable back support and

armrests, of approved make, colour and quality, including transportation, assembly and

installation, complete in all respects as directed by the Engineer-in-Charge.

61.0 2.00 Providing and fixing Library Signage / “KEEP SILENCE” Boards, made of 3 mm thick 3535.00 Rupees Three Thousand Five No.

ACP/FRP sheet or equivalent approved material, with computer-cut vinyl/UV printed Hundred ThirtyFive Only

graphics, lettering and symbols of approved size, colour and design, including edge

finishing, necessary aluminium/SS frame, brackets, fasteners and fixing at designated

locations, complete as directed by Engineer-in-Charge.

62.0 12.00 Rep old and U/S by new Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 539.34 Rupees Five Hundred ThirtyNine Point

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand Paise ThirtyFour Only

copper wires, in following type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and accessories Cat.III

63.0 10.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 1794.77 Rupees One Thousand Seven No.

assembled on single MCPCB, with housing used as a heat sink shall be made of thick Hundred NinetyFour Paise

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated SeventySeven Only

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

wattage capacity between the ranges shown.) (B) LED Panel Light with provision for

Plane front frame with translucent cover fixed to housing complete.IP20 (vi) 36 watts, 24"

x 24", Surge- 2KV Cat-lll

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

64.0 4.00 Providing new Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) 765.58 Rupees Seven Hundred SixtyFive Point

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in Paise FiftyEight Only

following type of pipe to be erected concealed in / flushed on wall/ceiling complete with

6A Modular type switch and hum free EME four or more step type electronic fan regulator

with separately mounted and accessories with earth continuity of following type erected

on PVC / Metallic box, single mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

65.0 4.00 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball 1948.29 Rupees One Thousand Nine No.

bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having Hundred FourtyEight Paise

3blades with aluminium blades with , canopy & 30 cm. down rod erected with TwentyNine Only

earthing.(Make shall be approved by Engineer in charge))

66.0 0.00 Providing following type of Modular Type Accessories mounted with PVC / 0

metallic/Wooden box, single mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

66.1 4.00 (8) Computer RJ-45 socket Cat.III 160.59 Rupees One Hundred Sixty Paise Ea

FiftyNine Only

66.2 4.00 (9) 16 Amp. SP one way switch Cat.III 180.79 Rupees One Hundred Eighty Ea

Paise SeventyNine Only

66.3 4.00 (10) 6/16Amp. Universal socket Cat.III 199.98 Rupees One Hundred NinetyNine Ea

Paise NinetyEight Only

66.4 4.00 (23) USB Charger with output of 5 V DC,2.1 A with inbuilt surge protection. 682.76 Rupees Six Hundred EightyTwo Ea

Cat-III Paise SeventySix Only

67.0 7.00 Providing and erecting Inverter based approved make split air-conditioning unit consisting 53083.58 Rupees FiftyThree Thousand No.

of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary EightyThree Paise FiftyEight Only

compressor with accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and

15A plug top & Remote Control & MS Stand) with necessary core cutting. (1)For ISEER

Range (KWH/KWH)(3.1 to 3.99) (B) for 1.5 ton capacity - Premium Cat.

68.0 1.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate 123.22 Rupees One Hundred Ea.

on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. TwentyThree Paise TwentyTwo

confirming to IS 8828/1996 with ISI Mark Only

69.0 1.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 811.03 Rupees Eight Hundred Eleven Ea.

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Paise Three Only

(c)63 Amp. Cat-III

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

70.0 1.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 2339.16 Rupees Two Thousand Three Ea

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS Hundred ThirtyNine Paise Sixteen

8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs Only

should be used of same company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b)

sheet steel double door

71.0 1.00 Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA 3344.11 Rupees Three Thousand Three Ea.

and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and Hundred FourtyFour Paise Eleven

neutral 415V. having characteristic of quick action & tripping with all advance feature & do Only

not incorporate any electronic component for following Max. rating erected as directed.

(iii) 63 Amps. FP Cat.III

72.0 260.00 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 58.58 Rupees FiftyEight Paise FiftyEight Mtr.

marked copper wires of following size to be erected as directed.e).1.50 Sq.mm 3 core Only

round PVC sheathed

73.0 300.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 168.67 Rupees One Hundred SixtyEight Mtr

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Paise SixtySeven Only

pipe of following size of cables (c) 4 core 10 Sq. mm

Rupees in Words ThirtyNine Lakh FiftyFour Thousand Eight Hundred Nine Paise Eight Only

I/We am/are willing to carry out the work at ………………………………………………………………………% above/below

Percent (should be written in figures and words ) of the estimated rates mentioned above. Amount of my/our tender works out as under:-

* Estimated amount * Estimated amount

Put to tender................................... Rs. ………………….. Put to tender......................................... Rs. …………………..

Deduct : ............................% below Rs. ………………….. Add ……............................... % above Rs. …………………

Net.................................................. Rs. ………………….. Total ...................................................... Rs. …………………

In words …………………………………………............................................................. In words …………………………………………......................................................

* (Please strike out whicheve is not applicable).

Note 1- All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

Note 2- All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

Note 3- Rates quoted include clearance of site (prior commencement of work and at itscolose) in all respects and hold good for work under all conditions, site, moisture, weather etc.

Note 4- To be continued on additional sheets, if found necessary.

Note 5- Above Schedule-B Amount is without GST but GST 18% will be charged on the bill generated.

Chief Officer

Nagarpalika Tharad