Refurbishment of AVS conference room

Designing, providing and fixing of 8 mm thick and decorative shade, high density Wood Polymer Composite (WPC) Panel of Standard make cladding at different locations including soffits of over-hangs and including all consumables i.e. clips, screw, sealant etc. as per the drawings. The WPC panel composition shall be of 55% wood powder + 35% HDPE powder + 10% additive all complete as per approved shop drawings and specification.

Providing and Fixing Grid System False Ceiling using GYPROC- Celotex-Pin/Fine Fissured Model Ceiling Tiles (manufactured by M/s Saint Gobain) using Gypsteel pre coated (Exposed portion only) GIT Grid system in 600 x 600mm module which includes providing and fixing wall angle along the perimeter of the room with the help of soffit cleat, rawl plugs and wire rod with levelling spring clip at 1200mm c/c. 1200mm cross Tee is then interlocked into the pre cut slots in the main Tees at 600 mm centres in direction perpendicular to the main tees to make a grid of 600 x 1200mm. Finally 600 mm cross tees are then interlocked into the pre cut slots in the 1200mm tees at 1200mm centres and in direction parallel to the main tee. Cross tees having length more than 600mm are to be supported independently.15mm thick SAINT-GOBAIN Gyproc India Celotex pin square / reveal / narrow reveal edge mineral fibre tiles of size 595 x 595mm shall be placed into the grid size of 600 x 600mm

Providing and fixing in position suspended seamless false ceiling system using 12.50 mm thick moisture resistant plain gypsum board (GYPROC MR of M/s. Saint Gobain make) suspended ceiling, which includes Gypsteel ULTRA™ CRP surface ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending Gypsteel ULTRA™ CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with Gypsteel ULTRA™ CRP surface ribbed ceiling angle of width 25mm x 10mm fixed to soffit with GI cleat and steel expansion fasteners (Mfg by M/s Saint Gobain Gyproc).

Providing & Fixing 20 Seater Conference Meeting Table of overall size 5.0 Mtr x 1.5 Mtr x 0.75 Mtr (L x W x H), made from 18 mm thick marine grade plywood structure finished with 1 mm thick decorative laminate (Sunmica) on both sides. The table shall consist of premium finish stone top and centre glass portion made of 8 mm thick toughened glass complete with necessary framework, edge polishing, support structure, hardware fittings, adhesive, polishing, and installation complete as directed by Engineer in Charge.

Supply & installation of workstation Table Top size of 1200x600x750 mm Thick made of 18 mm ply wood Along with cubical partition 40mm, drawers for each set as per technical specifications.

Providing and installation of corner table with storage. Size 1800 x 600 x 750 mm. The table should be made up from 18 mm thick plywood both sides laminated with all fittings included colour approved by engineer in charge.

Providing and installation of Storage table. Size 2500 x 600 x 750 mm. The table should be made up from 18 mm thick plywood both sides laminated with all fittings included colour approved by engineer in charge.

Supplying, laying and fixing in position of nylon floor carpet 4mm thick, of approved colour and as per direction of Engineer In charge.

Supply and fixing of roller blinds of approved colour, including all necessary fittings and accessories.

Providing and fixing new rexine upholstery for existing sofa,including removal of existingrexine, necsssury repair/ rectification,foam/padding replacement wherever required, stiting,fitting and complete upholstery work, as directed by the Engineer-in-charge.