Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.8 LAccepted-AOC | ₹43.8 L Quoted ₹44.1 L | L1 | Accepted-AOC BEING THE LOWEST BIDDER |
| 2 | L2₹47.2 L+₹3.2 L (7.16%)Rejected-Finance | ₹47.2 L+₹3.2 L (7.16%) | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
| 3 | L3₹48.8 L+₹4.8 L (10.8%)Rejected-Finance | ₹48.8 L+₹4.8 L (10.8%) | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
| Sl No | Description | Qty | Unit | LAXMI CORPORATION L1 | P K SHETH L3 | PATELS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply and use of polyelectrolyte chemical for disinfection of raw sewage water, ISI marked complete all as specified and directed. | 1,200 | Kg | 260 ₹3,12,000 Lowest | 320 ₹3,84,000 | 300 ₹3,60,000 |
| 2.00 | Supply and use of alum (Aluminium Sulphate) chemical for disinfection of raw sewage water, ISI marked complete all as specified and directed. | 800 | Kg | 42 ₹33,600 Lowest | 45 ₹36,000 | 45 ₹36,000 |
| 3.00 | Supply and use of sodium hypochloride liquid chemical 100 GPL for treated sewage water, ISI marked complete all as specified and directed. | 900 | Ltrs | 16 ₹14,400 | 15 ₹13,500 Lowest | 20 ₹18,000 |
| 4.00 | Dismantling/taking out non clogg submersible sewage pump set complete 7.5 HP and carrying out including repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part and reassmebling, testing & commissioning complete making it smooth functioning complete all as specified and directed.
Note :
1. Rates for making arrangement for lifting up the non clogg sewage pump from inside well shall deemed to be included in quoted rates. 2. Once the motor pump set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump.
3. The contractor should get the repairing work done at the installation site in presence of MES rep and only the rewinding and rotor job to be done outside defence land. | 1 | Each Job | 6,000 ₹6,000 Lowest | 6,500 ₹6,500 | 6,500 ₹6,500 |
| 5.00 | Dismantling/taking out non clogg submersible sewage pump set complete 5 HP and carrying out including repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part and reassmebling, testing & commissioning complete making it smooth functioning complete all as specified and directed.
Note :
1. Rates for making arrangement for lifting up the non clogg sewage pump from inside well shall deemed to be included in quoted rates. 2. Once the motor pump set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump.
3. The contractor should get the repairing work done at the installation in presence of MES rep and only the rewinding and rotor job to be done outside defence land. | 1 | Each Job | 9,000 ₹9,000 Lowest | 10,000 ₹10,000 | 9,500 ₹9,500 |
| 6.00 | M & L rewinding to motor stator winding of capacity 7.5 HP non-clog submersible pump set, 3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for 'F' class insulation and drying in heat chamber and refixing testing, commissioning complete so as to have same RPM, complete all as specified and directed | 1 | Each Job | 9,000 ₹9,000 | 7,000 ₹7,000 Lowest | 9,500 ₹9,500 |
| 7.00 | M & L rewinding to motor stator winding of capacity 5 HP non-clog submersible pump set, 3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for 'F' class insulation and drying in heat chamber and refixing testing, commissioning complete so as to have same RPM, complete all as specified and directed | 1 | Each Job | 6,000 ₹6,000 Lowest | 8,000 ₹8,000 | 6,500 ₹6,500 |
| 8.00 | Dismantling / taking out non clog centrifugal/monoblock sewage pump set complete 5 HP and carrying out including repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part complete all as directed and reassmebling, testing & commissioning complete making it smooth functioning complete all as specified and directed.
Note:- 1. Rates for making arrangement for lifting up the non clogg sewage pump from inside well shall deemed to be included in quoted rates. 2. Once the motor pump set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump.
3. The contractor should get the repairing work done at the installation site in presence of MES rep and only the rewinding and rotor job to be done outside defence land. | 1 | Each Job | 8,000 ₹8,000 Lowest | 8,000 ₹8,000 Lowest | 8,500 ₹8,500 |
| 9.00 | M & L for Dismantling/taking out motor stator for rewinding of capacity 5 HP motor of monoblock set, 3 phase by using best quality super enamelled copper winding wire of existing gauge and existing Nos of turns including varnishing for 'F' class insulation and drying in heat chamber and refixing testing, commissioning complete so as to have same RPM, complete all as specified and directed. | 1 | Each Job | 9,000 ₹9,000 Lowest | 10,000 ₹10,000 | 9,500 ₹9,500 |
| 10.00 | Dismantling/taking out non clog centrifugal/monoblock sewage pump set complete 12 HP and carrying out including repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskit/ mechanical seal, rotor shaft job, shaft coupling, spider etc or any other part complete all as directed and reassmebling, testing & commissioning complete making it smooth functioning complete all as specified and directed.
Note:- Rates for making arrangement for lifting up the non clogg sewage pump from inside well shall deemed to be included in quoted rates. 2. Once the motor pump set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump.
3. The contractor should get the repairing work done at the installation site in presence of MES rep and only the rewinding and rotor job to be done outside defence land. | 1 | Each Job | 10,500 ₹10,500 Lowest | 13,000 ₹13,000 | 12,000 ₹12,000 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Apr 2026, 6:00 pmClosed
GE (AF) BARODA
GE (AF) BARODA ,DARJIPURA , GUJARAT-390022
REPAIR/ REPLACEMENT AND PERIODICAL MAINTENANCE OF WATER TREATMENT PLANT, RO PLANTS, SWIMMING POOL AND STP PLANT AT AFS DARJIPURA VADODARA
2026_MES_755098_2
8150/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
DARJIPURA
AS PER NIT
9 documents required · 9 mandatory
₹500
Yes
₹80,000
Yes
10 Jul 2026
7 Apr 2026
23 Apr 2026
7 Apr 2026
21 Apr 2026
14 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Supply and use of polyelectrolyte chemical for disinfection of raw sewage water, ISI marked complete all as specified and directed. | - | Kg | - | - |
| - | Supply and use of alum (Aluminium Sulphate) chemical for disinfection of raw sewage water, ISI marked complete all as specified and directed. | - | Kg | - | - |
| - | Supply and use of sodium hypochloride liquid chemical 100 GPL for treated sewage water, ISI marked complete all as specified and directed. | - | Ltrs | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
BOQ_850551.xls
BOQ • 0.48 MB
8150PS.pdf
Tender Documents • 1.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .