ADDITION ALTERATION / SPECIAL REPAIR TO FOYER OF WARD ROOM MESS, BUILDING NO. P-5, PROVN OF PERIPHERY WALL, FOOTPATH FOR CHILDERN PARK AND VIEW CUTTERS ADJACENT TO JETTY AT INS DWARKA OKHA

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation, etc. and getting out in hard / dense soil, complete all as specified.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation, etc. and getting out in soft / disintegrated rock complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soil /soft-disintegrated rock, complete all as specified.

Removing excavated material (soil)to distance exceeding not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point.

Removing excavated material (rocks)to distance exceeding 50m but not exc 250 m and depositing where directed at a level not exc 1.5m above the starting point.

Removing excavated material (soils) exc. 250 m and n. exc. 500 m, depositing where directed at a level n. exc. 1.5 m above the starting point, complete all as specified and directed.

Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete articles and precast concrete block walling etc. Complete all as specified and directed.

Stone masonry walling or squared walling in cm 1:4, brought upto courses using dressed same size Porbandar stone of superior quality complete all as specified and directed.

Demolition of cement concrete(reinforced) (reinforcement cut as required to facilitate demolition)roofs, floor (other than ground floors), beam, lintel, band, staircases, landing, chajjas and similar suspended work of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Mild steel CRS bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel CRS bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Reinforced cement concrete (nominal mix) type A1, 1:1.5:3 as in Beams, walls, cantilevers, shelves, bressummers, lintels over 1.5m span (using 20 mm grade stone aggregate) complete all as specified and directed.

RCC Type A1 1:1.5:3 (using 20 mm graded crushed stone aggregate) as in chajjas complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup, ports, overhangs, etc. also splays between floors and beams complete all as specified.

Use and waste for form work to chajjas including edges etc, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc, Complete all as specified and directed.

Rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces in cement mortar 1:4 finished even & smooth with out using extra cement including use of water proofing compound in outer layer, complete all as specified and directed. (Note- Water proofing compound shall be measured and paid separately).

Supply only integral water proofing compound.

Rendering 10 mm thick ,on fair faces of stone masonry surfaces or concrete surfaces in cement mortar 1:6 finished even & smooth with out using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 2mm thick wall care putty complete all specified and directed.

Preparation of old decorated / treated surfaces of wall and applying two coat of oil bound distemper over 2mm thick wall care putty including removal of existing treatement completely complete all specified and directed.

Mirror polishing of existing marble flooring, skirting, risers, treads including joint filling complete all as specified and directed by Engineer-in-charge.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts; clamps, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way, straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc, complete all as specified and directed.

PCC 1:2:4 type B-1 using (20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and similar work including use & waste of necessary form work complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutter (without taking off Shutter) complete all as specified and as directed.

Plain, solid, straight chowkats and frames, using 1st class hard wood wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

35 mm thick 1st class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of sash bars and framing moulded, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) and fitted to chowkats.

30mm thick , 1st class hard wood Glazed and skeleton shutter for windows, open rebated and prepared to receive glass , gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of member of shutter as specified in SSR part-I section 8, clause 8.24 (a) supplied and fitted to chowkats etc.

5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.

8mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified.

Preparing surfaces of wood and wood based material, steel and iron work new or old, of any description and girth, not otherwise described and treated with tar or coal tar, black paint complete all as specified.

Preparing of new wood or wood based surfaces over 10 cm width and girth and applying one coat staining and two coats of varnish complete all as specified.

Preparing of new wood or wood based surfaces over 10 cm width and girth and applying two coat of synthetic enamel paint over one coat of pink primer.

100 mm Brass butt hinges with mild steel hinge pin, bright polished and fixed, complete all as specified and as directed.

75 mm Brass butt hinges with mild steel hinge pin, bright polished and fixed, complete all as specified and as directed.

200 mm long Brass barrel tower bolt with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and as directed.

150 mm long Brass barrel tower bolt with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and as directed.

250 mm Brass handles, cast type, polished bright, complete all as specified and as directed.

100 mm Brass handles, cast type, polished bright, complete all as specified and as directed.

300 mm long brass sliding door bolt with sand or die-cast brass hasp, staple(bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed.

150 mm Brass hook and eye for window shutter, complete all as specified and as directed

Brass floor door stopper length of cover plate 150mm, complete all as specified and as directed

Hydraulically aluminium extruded section body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as specified and directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers and hanging arrangements, including providing and fixing 12 mm thick Seamless calcium silicate ceiling board made out of1800 x 1200mm size board, comprising of of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Phillips head with under head cutter at minimum spacing of 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish and multi layer design, complete all as specified and as directed.

Preparing new surfaces of seamless ceiling and applying two coats of oil bound distemper over a coat of primer, complete all specified and as directed

Demolition of stone slabs & tiles of any description laid bedded and pointed in any mortar all as specified and as directed by Engr-in-Charge.

Outdoor paving tiles of size 300mm x 300mm x 25mm thick , scratch resistant, stain resistant, impact resistant & acid/alkali resistant , to withstand heavy loads and neutral to sun up effect, complete all as specified and as directed. ( Make - 'Endura' series of Johnson or equivalent series of makes specified in App 'B'

Stainless steel (Grade-304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, incl fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc).

Italian glass mosaic tiles on vertical surface of wall,column,etc with compatible tile grout as per manufacturers instruction and matching with adjacent surfaces with white cement and pigment complete all as specified and directed .

PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate as in foundations, filling and mass concrete or as in sub base (75 mm thick) complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion weather proof antifungal paint over one coat of compatible primer as per manufacturers recommendations , complete all as specified and as directed by Engr-in-charge.

Complete removal of existing unserviceable water proofing treatment including taking down plaster, padding of any description and in any position, cleaning, flushing out junctions of parapet wall washing down with water to prepare surface for new W.P.T including removing off, rubbish at out side MD land complete all as specified.

20 mm thick (average) bedding layer on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, mixed with WPC, finishing even and smooth without using extra cement complete all as specified and as directed. Note: WPC &APP measured and paid separately.

Water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions. (iii) Applying two coats of Bituminous aluminium paint on top of APP membrane.

20 mm thick hydraulically pressed PCC tiles of size as per site requirement and as directed by Engineer-in-Charge laid over & including cement mortar screed 15mm thick in CM 1:6 and jointed, pointed in CM 1:3 complete all as per directed by engineer-in-charge.

Cast iron decorative type spiral stair case including stingers, treads, landing, balusters, hand rails etc. including cleats, brackets etc complete all as specified and directed by engineer-in charge.

Preparation of steel or iron surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including complete all as specified and directed.

Taking up or down steel water tubing 25mm bore and connections and removal complete all as specified and directed.

Galvanised steel water tubing 25 mm dia medium grade ISI marked screwed socketed joints complete with all tube fitting (such as bends, elbow, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches,etc.,also cutting,screwing and waste and for making forged bends on piping as required at site.

Disconnecting existing tanks exc 500 & n exc 1000 ltr tanks, setting aside (or lowering if required) cleaning throughly and reconnected to its original location including new fittings complete all as specified and as direced.

25mm bore ball brass valve, high pressure with epoxy coated aluminium rod and high density polythene float ball and fly nut screwed for iron pipe complete all as specified and directed

Gun mental globe or gate valves, with iron wheeled head screwed both ends of iron pipes for 25 mm bore pipe fixed Complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in hard/dense soil including removing of surplus soil complete all as specified and directed by Engr-in-charge.

PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete or as in sub base (75 mm thick) complete all as specified and directed.

Mild steel rolled or hollow sections such as in main and cross beams, hip and Jack rafters, purlins, where connected to common rafters and running rails etc fixed with angle cleats or flat iron clamps or other connecting arrangements complete Fe 410 -W (Gde E- 250) quality A, complete all as specified and as directed.

Cutting holes superficial area exc 150 sq cm but n exc 400 sq cm into stone walls built in cement mortar or walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as require, complete all as specified and as directed.

High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to center) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

Stone masonry walling or squared walling in cm 1:6, brought upto courses using dressed same size Porbandar stone of superior quality complete all as specified and directed.

60 mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of complete (with grey cement and pigment) over and including 50 mm thick sand cushioning complete all as specified and directed.

Pre-cast cement concrete block masonry as in kerb stone with concrete type B1 1:2:4 (using 20mm graded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified and directed.

Framed work as in doors or gates of angle or other section etc. Conforming to Fe - 290 Gde-E-165, with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete.

MS framed work such as grills, gratings, etc with ends of bars shoulders or riveted or forged in to spikes, framed guard bars , rungs ,screen and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed.

INTERNAL ELECTRIFICATION

Taking down carefully copper/aluminium point wiring (light/fan, buzzer, socket or power point etc) complete including all fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Taking down Sub main wiring complete from batten/steel conduit including making good the disturbed surfaces.

Point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including drawn with PVC casing/caping with all accessories and PVC switch Box (IS-14772) of suitable size complete all as specified and directed for the following:-

(a) One Light/ fan point controlled by one one way switch.

(b) One 5 Amps 3/5 pin socket outlet on same board with other switches.

(c) One 5 Amps 3/5 pin socket outlet on independent board .

Point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including drawn with PVC casing/caping with all accessories and PVC switch Box (IS-14772) of suitable size complete all as specified and directed for the 15 Amps Switch socket on independent board all as specified and directed.

Point wiring with 4 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including drawn with PVC casing/caping with all accessories and PVC switch Box (IS-14772) of suitable size complete all as specified and directed for the One AC Point in independent circuit drawn directly from DB complete all as specified and directed

Sub main wiring with 6 Sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, confirm to IS with copper conductor drawn through and including PVC casing caping with all fittings and accessories including one run of 6 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge.

Ceiling rose surface Bakelite, 65x50mm, 3 terminals complete all as specified and directed.

Modular white cover plate with frame 2 modules complete all as specified and directed

Modular white cover plate with frame 3 modules complete all as specified and directed

Modular white cover plate with frame 8 modules complete all as specified and directed

Modular white cover plate with frame 12modules complete all as specified and directed

Modular switch 1 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Modular switch 1 way 16 Amps, 1 modules 230 volts complete all as specified and directed.

Modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed.

Modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed.

WEE PLUS LED 10 Watt Bulkhead luminaire An ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulkhead luminaires, IP 65 complete, extruded metal/aluminium body, electronic LED driver, connector block with all accessories internal prewired & connecting up with 2 core flexible copper conductor cable of suitable size with mounting clamps, fixed in repairs,complete all as specified and as directed. Make :- Bajaj Cat No - BIBWP 10W LED or equivalent model os makes specified in Appx 'B'.

Globe Post 25 Watt Decorative LED wall light in spherical shape polycarbonate diffuser & IP 65 protection, extruded metal/aluminium body, electronic LED driver, connector block with all accessories internal prewired & connecting up with 2 core flexible copper conductor cable of suitable size with mounting clamps, fixed in repairs,complete all as specified and as directed. Make :- Bajaj Cat No - BLWSP 25W NW LED or equivalent model os makes specified in Appx 'B'.

Hot press moulded SMC junction box 140mm x 140mm x 95mm (inside dimension) fixed with left side hinges and cable terminals with one No. 6 Amp SP MCB fixed to pole with clamp nuts,bolts etc complete all as specified and directed by Engineer-in-charge. Make:Sintex Cat No :- GSJB -1414 or equivalent model of make specified in Appx 'B'.

MCB DB Single pole and neutral 8 way double door IP-43,230V having earthing terminal,concealed in wall including making electrical incoming and outgoing connection with lugs/thimbles ,complete all as specified and as directed.

MCB SP 6-32 Amps,10 KA breaking capacity 'B' Curve suitable 230 V,50 Hz for lighting and other domestic load, fixed in repairs, complete all as specified and directed by Engineer - in - Charge Make:- Havells Cat No- DHMGBSPF006-032 or its equivalent model of make specified.

MCB SPN 40Amps,10 KA breaking capacity 'B' Curve suitable 230 V,50 Hz for lighting and other domestic load, fixed in repairs, complete all as specified and directed by Engineer - in - Charge .Make:- Havells Cat No- DHMGCSNF040 or its equivalent model of make specified.

PVC cable insulated unsheathed bright annealed bare copper conductor PVC insulated, PVC round overall sheathed multicore industrial Cables for voltage grade upto 1100 V as per IS 694:1990 size of 1.5 Sqmm 3 core laying through and including conduit pipe fiexd on wall/floor/parapet with proper clamps and saddle complete all as specified and as directed.

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work in any type of strata , salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore as watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with CRS Bars 8mm dia at the rate of 100mm centre to centre both way with 12mm dia lifting handle and pit / chamber constructed 50 cm away from the edge in PCC 1:3:6 type C1, Angle iron 40x40x3mm frame for pit cover including testing on completion complete all as specified and directed.

DB box MCB Protected Socket With sheet steel Enclosure single pole 20 Amp with 3 pin plug top for AC connection from Socket point to stabilizer complete all as specified and as directed. Make :- Havells Cat No- 20 A MCB DBOXX COMBO or its equivalent model of make specified in Appx 'B'.

Air Conditioner units split type with indoor & outdoor unit complete with cordless remote control unit including necessary insulated copper tubing, connecting electric cable to Socket, as per site requirement, wall mounted, electric driven, single phase of capacity 1.5 Ton BEE 5 star rated, copper tube condenser coil , 230 Volt, single phase, including all accessories, incl drilling hole across wall and connecting up, 3m PVC drain pipe (excess length will be measured and paid separately) , Incl installing outdoor unit on and including wall mounted bracket with complete testing and commissioning, complete all as specified and as directed. Daikin cat No- Copper JTKJ50TV white or its equivalent of Model Make Hitachi/ Carrier/ Voltas/ Bluestar

Supply, Install and testing of Voltage stabilizer for automation operation, single phase, naturally air cooled, indoor type & designed for input variation between 175 to 250 volts with output voltage stabilized at 215 to 240 Volts with accuracy of + 2.5% and speed of correction 8 Volts per second and of capacity 4 KVA with the following provisions :-(a) Low and high voltage cut off device. Make:- Vintec /Microtech/ V Guard

Supply and fixing and hanging of Lycor Lyse Decor Crystal Chandelier/Jhoomer ceiling hanging pendant light decor large size 480 mm ,width 480mm,height 600 mm, with and including E14 screw lamps and lamp holder and connected to ceiling rose with copper cable 3 core x1.5sqmm ,hanging to ceiling with and including chain and required hangging arrangements clamps hook etcg complete all as specified and as directed

SKYLUX LED 43 Watt natural white Efficient LED recessed 2x2 luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination, White powder coated CRCA housing, extruded metal/aluminium body, electronic LED driver, connector block with all accessories internal prewired & connecting up with 2 core flexible copper conductor cable of suitable size, seamless front frame with white high transmission acrylic cover, fixing on fall ceiling with wiring from ceiling rose to light fitting complete all as specified and as directed. Make :- Bajaj Cat No -BZRSQL 43W GZi NW or its equivalent model of make Specified.

SKYLITE LED Surface mounting 2x2 LED 43 watt luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination White powder coated CRCA housing with extruded metal/aluminium body, electronic LED driver, Aluminium front frame with at white high transmission acrylic cover,connector block with all accessories internal prewired & connecting up with 2 core flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Baja Cat No - BCTBLS 43 ZT WH or its equivalent model of make Specified here in before.

Building street light fitting Endura pearl 20W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impect resistance of IK07,with suitable size of GI pipe (light grade, with two coat aluminium painted ) bracket and clamps,nut bolts on wall/post and all as required and directed Make Havells cat no ENDURAPEARLSL20WLED757SASYTOPC or its equivalent model of make Specified here in before.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Wooden Box made out of 12.5mm thick 2nd class hard wood plank of size as directed by Engineer-in-Charge, suitable for TPN DB including fixing with suitable hold fast and dash through bolt including providing two coats of synthetic enamel paint over a coat of pink primer including two 100mm s.s. hinges med grade , one 100mm aluminium handle in each panel and one aluminium hasp staple for locking arrangements, fixed in repairs, complete all as specified and as directed.

TPN and vertical loadline 8 way double door suitable for G frame MCCB DBs are fitted with Bus Bars, Neutral Links, Blanking Plates, IP-43,230V having earthing terminal,concealed in wall including making electrical incoming and outgoing connection with lugs/thimbles complete all as specified and as directed.Make :- Havells Cat No :- DHDLVDRWGOFO08 or its equivalent model of make Specified here in before.

RCCB 63 Amp FP 100 mA,Four pole,240V,50Hz,IP-20,protection against earth fault/leakge current conforming IS-12640-12000,IEC 61008-1,complete all as specified and as directed.

MCB TPN 40 Amps, 10 KA breaking capacity , C Curve suitable for 230 V, 50 Hz AC Supply , fixed in repairs,complete all as specified and directed by Engineer - in - Charge.Make:- HPL Cat No- TTPNC-40 or its equivalent model of make Specified here in before.

MCB TPN 63 Amps, 10 KA breaking capacity , C Curve suitable for 230 V, 50 Hz AC Supply , fixed in repairs,complete all as specified and directed by Engineer - in - Charge.Make:- HPL Cat No- TTPNC-50-63 or its equivalent model of make Specified here in before.

EXTERNAL ELECTRIFICATION

Fine dry river sand cushion in trenches for cable protection with a layer of sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and directed. NOTE: - Only compacted thickness will be measured and paid.

Precast concrete cable cover unreinforced, ISI marked class LV types 2 flat size 250mm x 150mm x 40mm having minimum average breaking load 200Kg, complying IS:5820-1970 made of concrete used of grade M-20, laid flat in trenches over the cable with the length of concrete cover perpendicular to the direction of the cable length, adjacent / abutting each other complete all as specified.

Horizontal Boring / Cutting of Road/Foot Path for using through 40 mm bore pipe for cable protection and finishing PCC after Boring / Cutting of road / Foot path complete all as specified and directed.

GI tubing 40 mm bore light grade ISI marked for cable protection at road crossing/floor/wall/ on poles or at any indicated situation etc duly sealed at both end after drawing cable including necessary clamps, saddles all as directed and specified.

XLPE insulated armoured (under ground) heavy duty electric cable with standard aluminium conductor 1100 Volts grade of cross sectional area 16 sqmm 4 core laid in trenches/ducts/through pipes /in floor road/along the pole etc complete all as specified.

PVC insulated weather proof electric cable with standard aluminium conductor 1100 Volts grade of cross sectional area 6sqmm twin core laid in trenches/ducts/through pipes /in floor road/along the pole etc complete all as specified.

steel tubular swaged poles complete with cast iron base plate final taper plug bolts nuts & screws, Type 410 SP 31 (9M long) incl painting with two coats of aluminium paint overa coat of red oxide primer,including Marking pole all as specified & as directed. Note : Excavation earthwork and PCC will be measured and paid separately

Timer switches Analog type with battery back up of 3P module,24 hours programmable every SST 30 min complete all as specified and directed.'

LED street Light (Edge light) 60W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protection ,with suitable size of GI pipe (light grade, with two coat aluminium painted ) bracket and clamps,nut bolts on wall/post and all as required and directed Make Bajaj cat no BRTEG60W LED V3W or its equivalent model of make Specified here in before.

Hot press moulded SMC junction box 240mm x 130mm x 95mm (inside dimension) fixed with left side hinges and cable terminals with one No. 40 Amp tpn MCB C Curve fixed to pole with clamp nuts,bolts etc complete all as specified and directed by Engineer-in-charge. Make:Sintex Cat No :- GSJB -2817 or equivalent model of make specified in Appx 'B'.

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI Strip 32x6mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 50mm bore light grade all as shown in elect plate No 3 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work in any type of strata , salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore as watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with CRS Bars 8mm dia at the rate of 100mm centre to centre both way with 12mm dia lifting handle and pit / chamber constructed 50 cm away from the edge in PCC 1:3:6 type C1, Angle iron 40x40x3mm frame for pit cover including testing on completion complete all as specified and directed.

Decorative gate light type made up of high grade unbreakeble polycarbonate material suitable for retrofit B22 base and 60 mm pole dia with 10 watt LED lamp complete all as specified and direcred by Engineer-in-Charge. Make:- Havells Cat No:-(Pluto Opel) LHFXBON1TN5Q008 or its equivalent make specified

New generation post top energy saving environmental friendly,long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LED as light sourse Coral (opal) - IP65 suitable for pole dia 76 mm with 25 watt LED lamp complete all as specified and directed by Engineer - in - Charge. Make :- Havells Cat No:- CORALPT25WLED757PSYMTOPC or its equivalent of make specified.

SHREE CHAMUNDA ENTERPRISE