Annual Plan-2024/25 Koduvally Municipality (478/25)-478/25Anappara Anganavadi maintenance in Div 32 Retender

Amount

Detailed Estimate

OD535730/2024-2025:Providing and laying60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size and design and shape, laid in required colour and pattern over and including 50 mm thick compacted crushed stone of 6mm nominal size ,filling the joints with fine sand etc .all complete as per the direction of engineers in charge (Modified from data 16.68).

50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD535798/2024-2025:Providing and fixing PVC pipes includes of pipes with one step PVC solvent cement, Without trenching & refilling.Including testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10 Kgf/cm2 (Modified from DAR 50.18.9.2.2).

OD535800/2024-2025: Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, Without trenching.Including testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 (Modified from DAR 50.18.9.4.1)

OD535803/2024-2025:Providing and fixing PVC pipe includes jointing of pipes includes jointing of pipes with one step PVC solvent cement & amp;testing of joints complete as per direction of engineer in charge 40 mm dia 10kgf/cm2(Modified 50.18.9.5.1) without trenching and filling .

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD535805/2024-2025:Supplying and fixing Square UPVC gutter 160mm size with MS flats 25x5mm size @ rate 60 c/c fixing on roof members (purlins or rafters) ,bolts ,nuts and washer etc including necessary connections with rain water pipes complete .

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD535915/2024-2025:od11_665069/2020_2021: Painting pictures on wall using acrylic emulsion paint as per the approved design and direction of departmental engineer including all cost of materials labour charges etc complete.

ABDUL LATHEEF AK (BID ID -2203798)

Bidder Name

ABDUL LATHEEF AK

U K SUBAIR