REPAIR AND REPLACEMENT OF JOINERY AND CONNECTED ITEMS AT PRC, MES, TEMPLE LANE, STN HQ, ASRI, DAD MD AND OTM ACCN AND REPAIR TO PATH APPROCHES, HARD STANDING, BERMS AT RAMGARH CANTT

Amount

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed

Taking down shutters of any description not exceeding 1.0 Sq m each and removing from site, complete all as specified and directed by Engr-in-Charge .

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each and removing from site, complete all as specified and directed by Engr-in-Charge .

Refixing of shutter of any description exceeding not exceeding 1.0 Sq m in same opening after repaIr including suitable size hinge, if necessry for shutters complete all as specified and as directed.

Refixing of shutter of any description exceeding 1.0 Sq m but not exceeding 2.0 Sq m in same opening after repar including suitable size hinge, if necessry for shutters complete all as specified and as directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F for 1.25 mm thick pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC.

S&F for 1.25 mm thick pressed steel frames of size 165 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC.

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and as directed.

M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window , bed blocks & similar work etc. including necessary form work complete all as specified and directed.

S & F 35 mm thick factory made, IInd class hard wood Plain, framed, panelled shutters (three panels), with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and directed . .

S & F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , supplied and fitted to chowkats complete all as specified and directed . .

S & F 35 mm thick, factory made, 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (with sash bars) into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., if windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) complete all as specified and directed . (Note:- (i)Glass / wire cloth shall be measured & paid separately. (ii) Sample of shutter in sample room of GE office.

S & F 35 mm thick, factory made, 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . (Note:- (i)Glass / wire cloth shall be measured & paid separately. (ii) Sample of shutter in sample room of GE office.)

S&F in repair 18/19mm thick block board, grade -2 quality , interior grade, commercial type, fixed with screws to timber frame-work for cupboard shutter, shelf, etc fixed with screws & favicol including making holes with decorative covers for wires where ever required fixed complete all as specified and directed.

S&F in repair 12 mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work /for cupboard shutter, shelf, etc fixed with screws & favicol including making holes with decorative covers for wires where ever required fixed complete all as specified and directed.complete all specified and directed.

S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination for cupboard shutter, shelf, etc fixed with screws & favicol including making holes with decorative covers for wires where ever required fixed complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx) & two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed

S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx)& two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed

S & F for steel windows or ventilators, fixed type, with glazing bars complete including prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe-410 W Gde-E-250 quality B complete all as specified & directed.

S & F 1.00 mm thick mild steel, plain, black sheet in covering to door shutters, covering to door chowkhats (frames) cut to size edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc., as required, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames, glazed with oil putty or fixed with beads complete all as specified and directed

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .

S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangular not exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete all as specified & directed.

S & F Aluminium anodised handles of extruded section and fixed 150 mm long complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified & directed. .

S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as specified & directed. .

S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F in repair Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified & directed.

S & F in repair Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as specified & directed. .

S & F in repair 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F in repair 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

S & F mild steel sliding door bolts 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and

S & F in repair mild steel sliding door bolts 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and

S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F mild steel 200 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F in repair mild steel 200 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed. complete all as specified and as directed.

S & F 125 mm size/long hasp & staple, safety type aluminium anodised with mild steel hinge pin including bolt, to hinge plate and fixed with screws, complete all as specified and directed

S&F 30mm width of flaps (when open) continues piano hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.

M&L taking down old steel window projecting type by machanical cutter and fixed in same opening by providing box type hinges 02 Nos in each shutter, not exceeding 1.00 sqm and making good disturbed surface, fineshing to match with existing surface & panting to distrubed portion complete all as directed by Engr-in-Charge.

M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M & L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Taking down aluminium doors shutters only (area exceeding 0.50 sqm but not exceeding 4.0 sqm each) and dismantling all members and re-assembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed.

S&F powder coated aluminium frame with coating layer of minImum 50 micron thick for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc & powder coated aluminium grill of size 50mm x50mm size of mesh and 6mm dia fixed complete all as specified and driected.

S&F powder coated aluminium doors, shutters, with coating layer of minimum 50 micron thick, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing catching/handles 02 Nos. in each door, aluminium snap breading, screw etc. complete all as specified and directed.

S & F for powder coated aluminium window , ventilator shutters, with coating layer of minimum 50 micron, Track channel or fixed type without sash bar, aluminum section weighing min 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S & F 5.50 mm thick plain sheet glass area exceeding 0.5 Sqm in each pane of superior quality fixed to aluminium frame work with rubber neoprene beading including solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.

S & F 4.0 mm thick ACP board(Aluminium Composite Panel) ,exterior grade(approved colour) fixed with aluminium tapperd clip to aluminium frame complete all as specified & directed.

M&L double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor including cutting of floor for fixing of machine and making good to floor in affected area for aluminium doors including taking down existing floor spring complete all specified and directed.

S & F in repair for aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete etc all as specified & directed.

M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work complete all specified and directed.

S & F 4.0 mm thick sheet glass area exceeding 0.5 Sqm in each pane of superior quality fixed to aluminium frame work with rubber neoprene beading including solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.

S & F 4.0 mm thick sheet glass area not exceeding 0.5 Sqm in each pane of superior quality fixed to aluminium frame work with rubber neoprene beading including solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.

S&F of brass mortice lock, vertical type, size 65 mm long four levers (ISI marked) complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer -in-Charge.

S&F wooden beads of any size of Ist class hard wood Square / triangular in cross section, plain or desigen for fixing of mosquito net jali ,glazed or gauzed joinery,renewed, including mitres etc.and removing old beads complete all as directed by Engineer in Charge

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc & removing the debris from the premises upto 500 m from the MOD land complete all as specified and directed

M&L for rendering 15 mm thick on fair face of brick masonry/concrete surface etc., in cement mortar 1:6, surface finished even & smooth without using extra cement complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off MOD land etc complete all as specified and directed.

M&L for Brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

M&L for Brick work but except bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed. Note: old serviceable brick as retrieved from item No.69 of BOQ here-in before.

M&L for preparation of newely plastered surfaces of wall and applying three coats of white wash on wall surface complete all as specified & directed.

M&L for preparation of newly plastered surface of wall and applying 2.0 mm thick wall care putty in two layers to make entire surface free from undulations complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

S&F in repair 20 mm dia Harrison rails, anodised aluminium alloy with bracket etc., complete all as specified and as directed by Engr-in-Charge.

S & F in repair 19mm/20 mm dia mild steel tubing chromium plated curtain rod, 1.0 mm wall thickness including fixing with fancy brackets,stops, rollers etc.,complete all as specified and as directed by Engineer-in-Charge. Note: Running length of curtain rod shall be measured & paid only.

Demolition of plain cement concrete(un -reinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in levelling course,kerb/ benching/ coping /window cill etc including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed.

Running welding in repairs thickness of metal to be welded exceeding 6mm but not exceeding 9mm include for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, complete all as directed by Engr-in-Charge.

S&F for snack guard of size 35mm x 5mm thick fixed with door shutter with nails/screw with beading ,if required complete all as specified and directed.

S & F in repair health faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection & fixed in position complete all as specified & directed.

S&F in repairs mild steel Peg set fancy type of six,hat and coat hooks, solid body, not less than 300 mm long complete all as specified and directed.

S&F 140mm (overall length of cover plate) ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S & F 100mm size brass handle fancy type polished bright complete all as specified and as directed.

M&L for 18 to 20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and polished , over & including 15 mm thick rendering in cement mortar(1:4) etc including dismantling of exsting slab complete all as specifed and as directed.

S&F Aluminium anodised door stopper with rubber shoes of overall size 150mm long complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracked guard and railing 60cm long complete all as specified and directed.

S&F in repair brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1.0 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 x 460mm with bowl size 410 x 352 x178mm or 405x355x178mm complete all as specified and directed.

S&F mild steel cupboard shutter with frame, Godrej pattern made out 22 gauge mild steel sheet including chromium plated MD handle with proper looking arrangement (brass mortice lock, verticale type size 65mm, 4 liver with escutecheon plates & two key) with and including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolts 150mm long grought in brick wall/concrete including taking down of existing shutter & making good the distrubed surface complete all as specified and directed by Engr-in-Charge

Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving not exceeding 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engr-in-Charge.

Dismantling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, and removal of debries from site complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

Excavation in over areas in soft & loose soil not exceeding 1.5 metre deep and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L for hard core of broken stone or boulder gauge not exceeding 63mm deposited, spread & leveled in layers not exceeding 15cm thick, watered and rammed to a true surface etc complete all as specified& directed.

M&L for 60 mm thick factory made chamfered edge machine pressed pre-cast concrete coloured interlocking paver block of approved shade & size , laid in design & pattern as in footpath, light traffic parking etc, made by table vibratory method using PU mould of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including 50mm thick compacted bed over fine sand, compacting and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 80 mm thick factory made chamfered edge machine pressed pre-cast concrete coloured interlocking paver block of approved shade, laid in design & pattern as in footpath, light traffic parking etc, made by table vibratory method using PU mould of any shape and size conforming to IS-15658-2006 of M-40 grade laid over & including 50mm thick compacted bed over fine sand, compacting and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for 100 mm thick plain cement concrete (1:2:4) mix, type B-1 (using 20mm graded crushed stone aggregate ) as in path,berm etc., finishing the surfaces even and fair without using extra cement including necessary form work, complete all as specified and directed.

M & L antifungal chequered cement concrete tiles 30cmX 30cm X 22mm to 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment as in floors, over and including 20 mm thick cement screed bed in cement mortar (1:6) complete all as specified & directed.

M&L for coloured non digital paver vetrified exterior tiles 10 mm thick (square / rectangular) area of each tile not exceeding 0.36 Sqm in floors etc, over & including 20 mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M & L for 50 mm thick plain cement concrete (1:2:4) mix, type B-1 (using 20mm graded crushed stone aggregate ) as in sub base,flooring etc., finishing the surfaces even and fair without using extra cement including necessary form work,including 10 mm wide, 50 mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

M&L for rendering 15 mm thick on fair face brick masonry/concrete surface etc in CM (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plaster surface wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed.

Demolition and breaking up drain pipes of 300 mm dia (SGSW/AC/RCC) set in cement mortar including bed concrete and removal of debris to low lying area of distance not exceeeding 100 mtr complete all as directed by Engr-in-Charge.

S & F 300 mm bore Reinforced concrete drain pipes of class NP-2 laid and jointed with collars in trenches and jointed complete all as specified and as directed.

M&L reinforced cement concrete1:1.5:3 ,type A-1( M-20 )(using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note : Reinforcement & form work will be measured & paid seperately under respective item of BOQ.

Use and waste of form work to sides of soffit of suspended slab such as roof slab ,floor slab ,landing and similar work , not exceeding 200 mm thick for rough finished surface of concrete complete all as specified and directed.

S&F mild steel TMT Fe 500 D bars 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition of reinforced cement concrete as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for precast /cast-in-situ reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves ,man hole cover slab/ drain cover slab etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars 08 mm dia grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

M & L 19mm thick MDF membrance kitchen cabinets door shutter in wood grain colour, half round edge fixed complete all as specified and directed.

S & F auto close hinges, stainless steel, bright finish or electrogalvanised complete all as specified and directed.

M/s Popatlal A Rathod (BID ID -3337078)

ARYA ENTERPRISES (BID ID -3335307)

upadhyay engineers and consultant (BID ID -3339382)

M/s friend enterprises (BID ID -3346374)

Modernage Constructions Pvt. Ltd. (BID ID -3346587)

BEE ROMEN (BID ID -3337951)