REPAIRS TO CERTAIN WOODEN FURNITURE UNDER GARRISON ENGINEER NAVAL BASE VISAKHAPATNAM

Amount

CHAIR DINING (JCOs/OR) (FD/MAP-II/05) : M & L for removing the existing unserviceable front leg and supply and fix new leg made of first class hard wood (teak wood) duly french polished for obtaining glossy finish as to match with the existing complete all as specified, as directed and shown on drawing.

M & L for removing unserviceable Rear leg and supply and fix new Rear leg made of first class hard wood (teak wood) duly french polished for obtaining glossy finished as to match with the existing complete all as specified, as directed and shown on drawing

M & L for removing the existing unserviceable stiffener and supply and fix new stiffner made of first class hard woode (teak wood) duly french polished for obtaining glossy finish as to match with the existing complete all as specified, as directed and shown on drawing.

M & L for removing the existing unserviceable Side/Front/Back Rail and supply and fix new Side/Front/Back rail made of first class hard wood (Teak wood) duly French polished for obtaining glossy finish as to match with the existing complete all as specified, as directed and shown on drawing.

M & L for removing of existing damaged/unserviceable PVC seat and S & F with new 4mm thick PVC seat with holes in single piece (having 4 x 10mm thick ribs moulded along with seat as shown in drawing with suitable screws Make : Blow plast/Neel Kamal/Supreme/Cello/AMKO

SIDE BOARD DRG. NO. [ FD-1112 ] : M & L for removing the existing unserviceable damaged top from the Side Board, supply and fix new top made of 18mm thick pre-laminated particle baord one side decorative choice lamination and other side balancing white, medium density, Exterior grade with 4mm thick Teak wood beading all around and duly french polished for obtaining glossy finish to match with the existing complete all as specified and shown on drawing.

M & L for removing the existing unserviceable back of Side Board, supply and fix new back made of 18mm thick prelaminated particle board one side decorative choice lamination and other side balancing white to match with the existing complete all as specified and shown on drawing.

M & L for removing the existing unserviceable/damaged door shutter (both) of Side Board, supply and fix new door shutters made of 18mm thick prelaminated particle board one side decorative choice lamination and other side balancing white, Medium Density, Exterior grade with 4mm thick teak wood beading all round and duly French polished including all fittings and fixtures to match with the existing complete all as specified and shown on drawing and as directed. Note : (a) Handles should be powder coated MS handle 100mm long of approved quality (b) Hinges should be continuous piano type chromium plated of approved quality. (c) Magnetic catchers of approved quality.

M & L for removing the existing unserviceable damaged sides (both) of Side Board, supply and fix new sides (both) made of 18mm thick pre-laminated particle baord one side decorative choice lamination and other side balancing white, medium density, Exterior grade to match with the existing complete all as specified, as directed and shown on drawing.

M & L for removing the existing unserviceable damaged front portion of the drawers (four) of Side Board, supply and fix new top made of 18mm thick pre-laminated particle board one side decorative choice lamination and other side balancing white, medium density, Exterior grade including powder coated MS handle 100mm long to match with the existing complete all as specified, as directed and as shown on drawing.

M & L for removing the existing unserviceable damaged bottom of Side Board, supply and fix new bottom made of 18mm thick pre-laminated particle baord one side decorative choice lamination and other side balancing white, medium density, Exterior grade to match with the existing complete all as specified, as directed and as shown on drawing.

BIN LINEN MULTI PURPOSE DRG.NO. [ FD/E6/MAP/09] : [a] M & L for removing the existing unserviceable damaged top from the Bin Linen Multipurpose, supply and fix new top made of 18mm thick pre-laminated particle baord one side decorative choice lamination and other side balancing white, medium density, Exterior grade with 6mm thick Teak wood beading all around and duly french polished for obtaining glossy finish to match with the existing complete all as specified, as directed and as shown on drawing.

[b] M & L for removing the existing unserviceable back of Bin Linen Multipurpose, supply and fix new back made of 12mm thick commercial plywood to match with the existing complete all as specified, as directed and as shown on drawing.

[c] M & L for removing the existing unserviceable/damaged door shutter small (both) of Bin Linen Multipurpose, supply and fix new door shutters made of 18mm thick prelaminated particle board one side decorative choice lamination and other side balancing white, Medium Density, Exterior grade with 6mm thick teak wood beading all round and duly French polished including all fittings and fixtures to match with the existing complete all as specified, as directed and as shown on drawing and as directed. Note : (a) Handles should be powder coated MS handle 100mm long of approved quality (b) Hinges should be continuous piano type chromium plated of approved quality.

[d] M & L for removing the existing unserviceable/damaged door shutter big of Bin Linen Multipurpose, supply and fix new door shutters made of 18mm thick prelaminated particle board one side decorative choice lamination and other side balancing white, Medium Density, Exterior grade with 6mm thick teak wood beading all round and duly French polished including all fittings and fixtures to match with the existing complete all as specified, as direected and as shown on drawing and as directed. Note : (a) Handles should be aluminum anodized 75mm long of approved quality (b) Hinges should be continuous piano type chromium plated of approved quality.

[e] M & L for removing the existing unserviceable damaged sides (both) of Bin Linen Multipurpose, supply and fix new sides (both) made of 18mm thick pre-laminated particle baord one side decorative choice lamination and other side balancing white, medium density, Exterior grade to match with the existing complete all as specified, as directed and as shown on drawing.

[f] M & L for removing the existing unserviceable damaged front portion of the drawers (both) of Bin Linen Multipurpose, supply and fix new front portion portion made of 18mm thick pre-laminated particle baord one side decorative choice lamination and other side balancing white, medium density, Exterior grade including powder coated MS handle 100mm long to match with the existing complete all as specified, as directed and as shown on drawing.

[g] M & L for removing the existing unserviceable damaged bottom of Bin Linen Multipurpose, supply and fix new bottom made of 18mm thick pre-laminated particle baord one side decorative choice lamination and other side balancing white, medium density, Exterior grade to match with the existing complete all as specified, as directed and as shown on drawing.

Removing the existing unserviceable top, Supply & fix fix new top made of 18mm thick pre-laminated particle board one side decorative choice lamination and other side balancing white, Medium Density, Exterior Grade with 6mm thick teak wood beading duly French polished for obtaining glossy finish after preparation of the surface throughly rubbing with sand paper complete all as specified and as shown on drawing from the following items of furniture :- [a ] Table dining for 8 persons [ FD-30(M)/ 273 & 239]

[b] Table dining for 06 persons [ FD-30/ 273/239 & FD/MAP-II/03]

[c] Teapoy [ FD-34(M)/ 278 & 232]

[d] Table cente [ FD-274 & 235]

[e] Table Peg [ FD-277/25/236] .

[f] Table 900 x 600 with drawer [ FD-41(M)/ 283/224 ]

[g] Table 900 x 600 without drawer [ FD-42(M)/ 284 & 231]

Removing the existing unserviceable leg, supply and fix new Leg made of teak wood and duly French polished for obtaining glossy finish after preparation of the surface by throughly rubbing with sand paper to match with the existing complete all as specified and shown on drawing from the following items of furniture :-. [a] Table dining for 08 persons [ FD-30(M)/ 273 & 239]

[b] Table dining for 06 persons [ FD-30/ 273/239 & FD/MAP-II/03]

[c] Teapoy [ FD-34(M)/ 278 & 232]

[d] Table centre [ FD-274 & 235, FD-29M]

[e] Table Peg [ FD-277/25/236]

[f] Table 900 x 600 with drawer [ FD-41(M)/ 283 & 224]

[g] Table 900 x 600 without drawer FD-42(M)/ 284 & 231]

Removing the existing unserviceble top rail (long), supply and fix new rail made of teak wood duly French polished for obtaining glossy finish after preparation of the surface by throughly rubbing with sand paper to match with the existing complete all as specified and shown on drawing from the following items of furniture :-. [a] Table dining for 08 persons [ FD-30(M)/ 273 & 239]

[b] Table dining for 06 persons [ FD-30/ 273/239 & FD/MAP-II/03]

[c] Teapoy [ FD-34(M)/ 278 & 232]

[d] Table centre [ FD-274 & 235, FD-29M]

[e] Table Peg [ FD-277/25/236]

[f] Table 900 x 600 with drawer [ FD-41(M)/ 283 & 224]

[g] Table 900 x 600 without drawer [ FD-42(M)/ 284 & 231]

Removing the existing unserviceable top rail (short) and supply and fix new rail (Short) made of teak wood duly French polished for obtaining glossy finish after preparation of the surface by throughly rubbing with sand paper to match with the existing complete all as specified and shown on drawing from the following items of furniture :-. [a] Table dining for 08 persons [ FD-30(M)/ 273 & 239]

[ b] Table dining for 06 persons [ FD-30/ 273/239 & FD/MAP-II/03]

[c] Teapoy [ FD-34(M)/ 278 & 232]

[d] Table centre [ FD-274 & 235, FD-29M]

[e] Table peg [ FD-277/25/236]

[f] Table 900 x 600 with drawer [ FD-41(M)/ 283 & 224]

[g] Table 900 x 600 without drawer [ FD-42(M)/ 284 & 231]

REPAIRS TO TABLE WRITING [ FD/33(M)249/275] : [a] Removing the eixisting unserviceable/damaged top of the table writing and supply and fix the same with new one as to match with existing made out of 18mm thick pre-laminated particle board, medium density, exterior grade one side decorative choice lamination and other side balancing white laminated finish duly providing 4 mm thick teak wood beading all around and duly french polished for obtaining glossy finish to match with existing complete all as specified and shown on drawing and as directed.

[b] Removing the existing unserviceable/damaged leg of the table writing and supply and fix the same with new one as to match with existing made out of first class teak wood duly french polished for obtaining glossy finish to match with existing complete all as specified and shown on drawing and as directed.

[c] Removing the existing unserviceable/damaged leg (short) of the table writing and supply and fix the same with new one as to match with existing made out of first class teak wood duly french polished for obtaining glossy finish to match with existing complete all as specified and shown on drawing and as directed.

[d] Removing the existing unserviceable/broken side/bottom rail of the table writing and supply and fix the same with new one as to match with existing made out of first class teak wood duly french polished for obtaining glossy finish to match with existing complete all as specified and shown on drawing and as directed

[e] Removing the existing unserviceable/damaged back of the table writing and supply and fix the same with new one as to match with existing made out of 6 mm thick commercial ply conforming to IS : 303 of 1975 complete all as specified and shown on drawing.

[f] Removing the existing unserviceable/damaged side of the table writing and supply and fix the same with new one as to match with existing made out of 18mm thick particle board one side decorative choice lamination and other side balancing white laminated finish complete all as specified and shown on drawing.

[g] Removing the existing unserviceable/broken stiffener of the table writing and supply and fix the same with new one as to match with existing made out of first class teak wood duly french polished for obtaining glossy finish to match with existing complete all as specified and shown on drawing.

[h] Removing the existing unserviceable front portion of the drawer of the table writing and supply and fix the same with new one as to match with existing made out of 18mm thick particle board one side decorative choice lamination and other side balancing white laminated finish including provision of knob complete and all as specified and shown on drawing. Note :- (i) Knob should be aluminium anodised (Dark Brown) chromium plated of approved size and quality.

[i] Removing the existing unserviceable/damaged door shutter of the table writing and supply and fix the same with new one as to match with existing made out of 18 mm thick partical board one side laminated finish including 4 mm teak wood beading all around duly french polished for obtaining glossy finish to match with existing including fitting/fixtures complete and all as specified and shown on drawing. Note :- (i) Lock should be brass 50mm with duplicate key. (ii) Knob shall be aluminium anodised (Dark Brown) chromium plated of approved size and quality. (iii) Hinges shall be continuous piano type (steel) of approved quality.

REPAIR TO TABLE BED SIDE [ FD-276] [a] Removing unserviceable/damaged table top, S & F new Top made out of 18mm thick, Prelaminated Particle Board, one side decorative choice lamination and other side balancing white, Medium Density, Exterior Grade with 4mm thick teak wood beading all round and duly French polished for obtaining glossy finish to match with the existing complete all as specified and as directed and as shown on drawing.

[b] Removing unserviceable/damaged sides (Both), S & F new sides made out of 18mm thick, Prelaminated Particle Board, one side Decorative choice lamination and other side balancing White, Medium Density, Exterior Grade with 4mm thick teak wood beading all round and duly French polished for obtaining glossy finish to match with the existing complete all as specified and as directed and as shown on drawing.

[c] Removing unserviceable/damaged shelf, S & F new shelf made out of 12mm thick, Prelaminated Particle Board, One side Decorative choice lamination and other side balancing white, Medium Density, Exterior Grade to match with the existing complete all as specified and as directed and as shown on drawing.

[d] Removing existing unserviceable/damaged back, S & F new Back made out of 6mm thick commericial ply wood to match with the existing complete all as specified and as directed and as shown on drawing

SANTOSH CONSTRUCTIONS

Chitturi Associates

SOHAN ENGINEERING ASSOCIATES

K APPAJI KUMAR AND CONSTRUCTIONS

S.M.Electricals

M/s.Kissenlal Daga

Bidder Name

SOHAN ENGINEERING ASSOCIATES