Erection &labour work of supply, laying, testing & commissioning of 11/22 kv underground XLPE cable (XLPE cable will be supplied by DGVCL) with cable end termination & straight through jointing kit (to be supplied by contractor) on ARC basis under all scheme under CFC Piplod Division as well as in jurisdiction of Bamroli sub division under Piplod Division or within the jurisdiction of Surat City Circle.

Sub:-Erection & labour work of supply, laying, testing & commissioning of 11/22 kv underground XLPE cable (XLPE cable will be supplied by DGVCL)

with cable end termination & straight through jointing kit (to be supplied by contractor) on ARC basis under all scheme under CFC under Piplod

Division as well as in jurisdiction of BAMROLI sub division under Piplod Division or within the jurisdiction of Surat City Circle.

Item Code DETAILS OF WORKS Qty Unit Rate Amount

1 9925000001 Labour charge for excavation of cable trench of 400mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

2 9925000002 Labour charge for excavation of cable trench of 600mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

3 9925000003 Labour charge for excavation of cable trench of 400mm width x Meter

1500mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

4 9925000004 Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 Meter

mm2 & preparation of sand layer 100mm thick, in the cable trench &

covering the cable with 150 mm dia (Inner), thickness 25 mm,

meter long RCC half round muffs and providing and fixing of 4inch

width yellow colour polyethylene tape with printing "CAUTION

ELECTRIC CABLE BELOW" at 0.75 m depth from ground surface after

laying cable in trench. This will provide indication that electric cable

is passing underground so as to protect cable from mechnical

injuries, refilling the same, as per Instruction of Engineer in Charge

5 9925000005 Labour

(EIC). charge for horizontal drilling using Auger machine without Meter

damage to surface road at max 2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E.

pipe confirms to IS 4984-1987(3rd revision) and BIS certification and

laying of 11KV/22KV XLPE cable of size up to 300 mm2 in HDPE pipe,

as per Site Condition (excluding cost of pipe). The detail map

obtained from HDD machine and excell sheet(hard and soft copy)

indicating the respective depth and distance from adjacent landmark

for each segment for HDD is must required to be submitted. HDD to

be carried out at depth 1.5 mtrs to 2.0 mtrs as per site conditions

and as per instruction of EIC.

6 9925000006 Labour charge for horizontal drilling manually without damage to Meter

surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-

4,Green color, 110mm O.D., 8.5mm thickness H.D.P.E. pipe confirms

to IS 4984-1987(3rd revision) and BIS certification and laying of

11KV/22KV XLPE cable of size up to 300 mm2 size, as per Site

Condition (excluding cost of pipe). The detail map and excell

sheet(hard and soft copy) indicating the respective depth and

distance from adjacent landmark for each segment of cable to be

submitted. Drilling to be carried out at depth Minimum 1.2 mtrs to

2.0 mtrs as per site conditions as per instruction of EIC.

7 9925000007 Supply of 6.11kg/cm2, class-4,Green color, 110mm O.D., 8.5 mm Meter

thickness H.D.P.E. pipe confirms to IS 4984 and BIS certification for

laying of underground 11KV / 22KV XLPE cable up to 300 mm2 size.

8 9925000008 Labour work for RCC concreting on disputed location and repairing CMT

of damage portion of road crossing for the work carried out for

roads crossing as well as concreting & muffing of ploes including all

materials (1:2:4)

9 9925000009 Providing & fixing concrete stone route marker of 300 mm width x No

150 mm thick x 650 mm height embedded in earth at least 300 mm

below & 350 mm above ground level respectively at distance approx

50 meters along the length of cable. The RCC concreting (1:2:4)(all

necessary maeterials will be in bidder's scope) of route marker is to

be carried out 300 mm width x 150 mm thick x 300 mm below

ground level as per instruction of EIC. The route marker should be

with name of company with approved yellow colour-DGVCL. The

distance from marker to cable and cable depth with feeder name

etc., marked with arrow sign is to be painted on it.The route marker

is to be fixed at location near to any fixed permanent location (not

necessary to fix exact on top of cable) as per instruction of EIC.

10 9925000014 Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to Per Job

300 mm 2 on DP Structure with fixing of 02 Nos polymer cleats on

top and middle part. Polymer cleats, nut bolts etc. fixing material to

be provided by contractor.

11 9925000015 Providing & fixing of 6.11kg/cm2, class-4,Green color, 110mm O.D., Per Job

8.5mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification on the erected DP structure for the mechanical

protection of cable by inserting the cable inside HDPE pipe. The

HDPE pipe shall be erected in such a way that 300mm shall be below

the ground level and the rest 2700 mm shall be supported on the

DP Structure with 01 No Polymer cleat. All materials including

polymer cleat and Nut bolt to be provided by contractor.

12 9925000016 Providing and fixing of pipe type earthing from 80 mm dia class-B GI No

pipe with pit to be filled with salt & coke and construction of

chamber as per DGVCL Drg. No. dg /100 for DP and cable. The

earthing pit should be joined with cable by G.I. strip of size 1” width

& 2 mm thick. All material GI pipe, Coke, Salt etc will be supplied by

13 bidder. & fixing of heat shrink type end terminations (outdoor) for

9925000017 Supply No

upto 11kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

14 9925000018 Supply & fixing of heat & shrinkable end terminations (outdoor) for No

upto 22 kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

15 9925000019 Supply & fixing of heat shrink type end terminations (indoor) for upto No

11kV 3C x 185 mm 2 size X LPE cable as per DGVCL technical

16 9925000020 Supply & fixing of heat & shrinkable end terminations (indoor) for No

upto 22 kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

17 9925000021 Supply & fixing of heat shrinkable straight through joint for upto No

11kV 3C x 185 mm 2 size XLP E cableas per DGVCL technical

18 9925000022 Supply & fixing of heat shrinkable straight through joint type for upto No

22kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

19 9925000023 Labour charge for excavation of 2100mm long x 1200mm wide x No

1200 mm deep joint pits for installation of 11kV/22kV Straight

through joints as per instruction of engineer-in-charge & covering the

cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long RCC

half round muffs & refilling same as per instruction of EIC .

20 9925000024 Providing and fixing of insulating bus bar , made from 11KV/22KV No

XLPE cable after removal of semi conducting layer and applying of

PVC heat shrinkable anti-tracking core insulating tubing (1.1KV), on

both end terminal using Aluminium long barrel heavy duty up to

sq mm lugs, Aluminium bus connector. Taping with PG- clamp for

bus conductor as per drawing and as per instruction of EIC. The

Alluminium lugs and PG clamp shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope)

21 9925000025 Testing of cable at various points and commissioning the feeder as No

per instruction of engineer-in-charge. Test result shall be submitted

by contractor with bill.

22 9925000026 Preparation and submission of 6 (six) copies , of complete layout Set

drawings with GIS mapping as per actual cable routing showing road

crossing, HDPE pipe sleeving, jointing locations, markers etc.

23 9925000027 Providing and fixing of Sign Board at junction point Made out of 2 No

mm aluminium sheet size 750x300 mm (2.5 x 1ft) rectangle, as per

design, pre treated with phosphate process and acid etching coated

with one coat of epoxy primer and two coats of best quality paints,

refloctrorised with Hi-Intensity retro – reflective sheeting as per the

latest and frame fabricated from suitable size iron angle. The Sign

Board is to be fixed on the base prepared from channel and bracing

angles which is grouted by means of cement concreting of 1:2:4 for

size of 300 mm dia x 800 mm height (500 mm to be grouted in

ground). The details to be displayed on sign board will be given by In-

charge Engineer.

(a) Hi intensity Micro prismatic Grade

24 9925000028 Providing and fixing of Sign Board (Danger Board) on Distribution No

Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as per

design, pre treated with phosphate process and acid etching coated

with one coat of epoxy primer and two coats of best quality paints,

refloctrorised with Hi-Intensity retro-reflective sheeting as per the

latest and frame fabricated from suitable size iron angle. The Sign

Board (Danger Board is to be fixed at the location as per instruction

of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

25 9925000029 Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) No

from 3 mm aluminium sheet along with 1.0 mm dia aluminium

binding wire for fixing of aluminium tag near end termination joint at

DP structure for identifyng the cable. The details of feeder i.e. 11 /

KV with feeder name shound be punched on the tag by letter punch

of size 16 mm as per instruction of In-charge Engineer.

26 9925000030 Supply & fixing of heat shrink type end terminations (outdoor) for Nos

11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

27 9925000031 Supply & fixing of heat & shrinkable end terminations (outdoor) for Nos

22 kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

28 9925000032 Supply & fixing of heat shrink type end terminations (indoor) for Nos

11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

29 9925000033 Supply & fixing of heat & shrinkable end terminations (indoor) for 22 Nos

kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

30 9925000034 Supply & fixing of heat shrinkable straight through joint for 11kV 3C x Nos

240 mm2 size XLPE cableas per DGVCL technical specification.

31 9925000035 Supply & fixing of heat shrinkable straight through joint type for 22kV Nos

3C x 240 mm2 size XLPE cable as per DGVCL technical specification.

32 9925000047 Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench per cable

or in open space per mtr

Labour charges for Lying of O/H XLPE cable pole to pole

34 9925000064 Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC NO.

half round pipe

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole

with cable connection arrangement along with fitting of necessary

fabrication for 11KV cable including excavation of pit & refilling of

earth as per instruction of EIC. (Exclusive of concreting & muffing of

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable

connection arrangement along with fitting ofnecessary fabrication

for 11KV/22 KV cable including excavation of pit & refilling of earth as

per instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with

cable connection arrangement along with fitting of necessary

fabrication for 11KV cable including excavation of pit & refilling of

earth as per instruction of EIC. (Exclusive of concreting & muffing of

Erection of Single pole structure using 8.0 Mtr PSC pole with cable

connection arrangement along with fitting ofnecessary fabrication

for 11KV/22 KV cable including excavation of pit & refilling of earth as

per instruction of EIC. (Exclusive of concreting & muffing of poles)

40 Laying (including installation, testing and commissioning) of various mtr 335 as per rate derived by UGVCL

size of letter no ugvcl/r&c/ug/Cost

Single circuit 11 KV 300 sq mm XLPE insulated Aluminium armoured Data-2022-23/816 Date:-27-01-

Cable in ground 1200 mm deep and 300 mm wide trench, providing

sand cushioning below (75 mm thick layer of sand) and above (75

mm thick layer of sand) of the cable and covering it with RCC half

round hume pipe (150 mm inner

diameter with thickness of 30 mm and One meter in length) before

pre-bonding tap/warning tap should provide below 700 mm from the

ground level and back filling the same to make ground level as per

41 Laying (including installation, testing and commissioning) of various mtr 468 as per rate derived by UGVCL

size of letter no ugvcl/r&c/ug/Cost

As per specification and drawing of DGVCL. ( RCC half round pipe

Double circuit 11 KV 300 sq mm XLPE insulated Aluminium armoured Data-2022-23/816 Date:-27-01-

Cable in ground 1200 mm deep and 500 mm wide trench, providing

provide throughout on cable without gap).

sand cushioning below (75 mm thick layer of sand) and above (75

mm thick layer of sand) of the cable and covering it with RCC half

round hume pipe (150 mm inner diameter with thickness of 30 mm

and One meter in length) before refilling pre-bonding tap/warning

tap should provide below 700 mm from the ground level and back

filling the same to make ground level as per original. As per

specification and drawing of DGVCL. ( RCC half round pipe should be

provide throughout on cable without gap).

42 Supply & fixing of heat shrink type end terminations (indoor) for No 5549 as per rate derived by UGVCL

11kV 3C x 300 mm2 size XLPE cable as per technical specification. letter no ugvcl/r&c/ug/Cost

43 Supply & fixing of heat shrink type end terminations (outdoor) for No 6676 as per rate derived by UGVCL

upto 11kV 3C x 300 mm2 size XLPE cable as per technical letter no ugvcl/r&c/ug/Cost

specification. Data-2022-23/816 Date:-27-01-

44 Supply & fixing of heat shrinkable straight through joint for 11kV 3C No 8040 as per rate derived by UGVCL

x 300 mm2 size XLPE cableas per L technical specification. letter no ugvcl/r&c/ug/Cost

Rate as per SOR 50,00,000/-

Executive Engineer (O&M)

DGVCL, Division Office,