Construction of Main Gate and Memorial Tomb of Platinum Jubilee Celebration at Basic Training Centre, Kokrajhar in Kokrajhar Dist. TN No.74_02

Amount

IRON GATE 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with

BOUNDARY WALL (PAINTING WORK) 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

16.93 Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

2.33 Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.33.3 Beyond 120 cm girth upto and including 240 cm girth

2.33.2 Beyond 60 cm girth upto and including 120 cm girth

13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer

13.90 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : 13.90.1 Old work (one or more coats)

13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel windows by welding

BOUNDARY WALL 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.

16.12 Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : 16.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 a) Brick on flat soling

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) a) In prop 1:3:6

5.22 Steel reinforcement for R…….. work including straightening, leaning utting and bending to proper shape plaing in position and binding up to plinth level 5.22.6 TMT bar Fe500D or more 5.22.1 Mild steel and Medium Tensile steel bars

5.9 Centering and shuttering including strutting, propping etc. and removal of the same…. 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete 5.9.1 Foundation, footings, bases of columns, pile cape, raft and mass concrete work etc.

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Columns, Pillars, Posts and Struts

5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)

13.5 15 mm cement plaster in single coat on rough side of single or half brick wall of mix: 13.5.2 1:6 (1 cement: 6 coarse sand) c) In cement mortar 1:5

13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer

13.44 Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

PAINTING PRINCIPAL OFFICE BUILIDNG 13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer

13.44 Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

GARAGE (PAINTING WORK) 13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer

13.44 Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

11.4 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

GATE ARTISTIC WORK AND STRUCTURAL WORK Rope Coconut

Polythene paper/ tarpauline

WOOD for burning the mould

BLACK WIRE

SIDE IRON GATE (making and installation)

ARTIST REMUNERATION

HACKSAW

BAMBOO

CEMENT

ROD 8mm

LABOUR

COLOUR MATE

STONE

HEAD MISTRI

METALLIC PAINT

PLATINUM CELEBRATION RHYTHM STILL PIPE WITH MAKING CHARGE AND 75 OVAL STILL PLATE

PLAIN SHEET 40FT

TOMB ARTISTIC WORK AND STRUCTURAL WORK CLAY

ARMCHAIR

COCONUT ROPE

POLYTHENE PAPER

ROLL BASTA

WATER SPRAY 4Nos

WOOD for firing 45 cu.ft

PLASTERR OF PARIS- (moulding the shape of the statue)

Resin

Bee Wax

Thinner

MUSTARD OIL

Fibre Glass

Brushes (for painting, finishing etc.)

Large Bucket

BRICKS

Harner

GUNA/BLACK WIRE

Prinshop Powder

TIN 2 BAAN

Cobal

Diber Colour

ARTIST REMUNERATION

ASSISTANT ARTIST 1 PERSON

Primer for Fibre

Spirit 5 bottle

BAMBOO

CEMENT

STONE

HEAD MISTRI

COLOUR MATE

METALLIC PAINT

BLACK GRANITE STONE

PLATINUM CELEBRATION RHYTHM STILL PIPE WITH MAKING CHARGE AND 75 OVAL STILL PLATE

PLAIN SHEET

Labour

Arjun Saha