Construction of meeting Hall at Gurundia Tahsil office building in the District of Sundargarh for the year 2024-25

Dismentalling brick/stone masonary of cement mortar upto 3mtr height(2.83cum)

Dismentalling old tile flooring (9.3 sqm)

Fly ash Brick masonary using bricks of size 23x11x 8 cm in CM(1:6) in superstructure with cost of all labour and materials, etc complete.

12mm thick cement plastering in cement mortor 1:6 in finished smooth surface of brick wall after raking joints including cost, conveyance, royalties ,taxes of all materials etc complete.

16mm thick cement plastering in cement mortor ( 1:6) in finished smooth to surface of brick walls including cost, conveyance, royalties ,taxes of all materials etc complete.

Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.

20mm Granite tile of above 10mm thick size over 20mm thick bed CM(1:4) Details for 10.00Sqm (A/R 2012, Other building item, item no-1B)

Finishing wall surface with acrylic wall putty finished smooth to exposed new plastered surface including cost of all materials etc.complete. as per direction of Engineer In Charge.

Wall Priming one coat with any approved primer on New Plastered surface of with any approved primer including cost of primer

Distempering two coats with any approved shade including cost of distemper

Supplying, fitting and fixing steel Angle iron door and windows as per approved design and drawing including all cost of materials and labour etc complete as per direction of Engineer in charge

Supplying, fitting, fixing up window (sliding type) made up aluminium section 151-154, 151-155,aswindow frame Section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C

Providing fitting & fixing of door made out of BPW GRAD FLUSH DOOR conferming IS 2202 CENTURY /SYLVAN and 4 mm thick Century American malie & Tineo veneer Both side including cost of all hings and malamine policing including cost and convency royalty and taxes of all materials hire charges of drilling mechine all labour charges T&P required for the work completein all respectand as per direction of engineer in charge.

Providing wall penelling with century/sylvan 19mm/12mm ply ISO 303(BWR) and 4mm thick century veneer Tino Century veener, American maple including melamine polishing and cost convencyance royalty and taxes of all materials hair charges and cost of all labour and T&P required for the work complete in all respecte as per direction of engineer in charge.

Synthetic enamel paint with Priming one coat with approved Red Oxide Primer on Steel work

Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete /masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes complete.

Providing & Fixing of Gypsum Board False Ceiling with 12.5mm Gypboard and its Accessories i.e GI Ceiling Section, Intermediate,Ceiling Angle, Perimeter, Drywall Screws,ConnectingClip etc Finished with Jointing Compound,Paper tape etc all complete.

Providing fitting & fixing office cabinate of width 1.33ft made out of 19mm BWR ply with sliding shutter made out of 6mm thick BWR ply and exposed surface pasted with 1mm thick sunmica and finished with teak wood beading including enamel penting to inside surface including cost and convency royalty and taxes of all materials and cost of all fixture requiredand all labour charges T&P etc complete in all respecte as per direction of engineer in charge.

Providing fitting fixing of Decorative rooer blinds to openings ) including cost ,coveyance royalty and taxes of all materials and cost of all labour T&P required for the work complete in all respect as per direction of EIC.

Provision of purchasing deluxe arm chair for meeting halll etc

Please Enable Macros to View BoQ information